Reviews
Fits: HONDA GYROUP, HONDA GYRO CANOPY, HONDA GORILLA, HONDA ELSINORE 250(MT250), HONDA APE TypeD, HONDA XR50 MOTARD, HONDA TL125IHATOVO(TL125S), HONDA XR400 Motard, HONDA XR250MOTARD, HONDA XR250, HONDA XR230MOTARD, HONDA XR100MOTARD, HONDA XR230, HONDA XLX250, HONDA XLR250, HONDA XL500, HONDA XLR250, HONDA XL400R, HONDA XL250, HONDA XL125
I determined it by appearance
I bought it this time because I was concerned about it before..
I think that they are all the same regarding installation. Preference may be splitting up to be thicker than previous Pro grip.
View detail
I can use it normally.
"NISSIN Radial brake master" In order to install, we replaced NORMAL's Brake hose for this.
Because it is a two wheel with ABS, just to be sure, I made it the same Type Brake hose as NORMAL. It has no problem and it can be used.
View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
ALCAN hands Black Rubber Grip Delta
ALCAN hands Black Rubber Grip Delta ALCAN hand-held sleeves are designed to be easy to clean.(translated by Google Translator) View detail
Fits: HONDA GYROUP, HONDA GYRO CANOPY, HONDA GORILLA, HONDA ELSINORE 250(MT250), HONDA APE TypeD, HONDA XR50 MOTARD, HONDA TL125IHATOVO(TL125S), HONDA XR400 Motard, HONDA XR250MOTARD, HONDA XR250, HONDA XR230MOTARD, HONDA XR100MOTARD, HONDA XR230, HONDA XLX250, HONDA XLR250, HONDA XL500, HONDA XLR250, HONDA XL400R, HONDA XL250, HONDA XL125
OEM not like too casual and casual
【What made you decide the purchase?】
Although it was better to feel discreet than the rumored DominoGrip in the street but decisive.
【How was it actually used?】
OEM same etc. Of hardness and the outer diameter of Handlebar does not feel so much change.
But you can quietly feel the sense of casual feeling that OEM does not have before and after riding.
【Was it difficult to install? (Hard parts case)】
Very easy.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Removing an OEM
Just remove Handlebar Weight and apply Parts cleaner to the gap of Grip from Switch box side and Handlebar End side. Afterwards twisting as if turning, gaps will come to come and I will pull out with crispness. (There are some PA warpays)
Installation of this product
Insert the custard before applying the Parts cleaner on the inside of the Grip in advance and volatilize!
Easy to put when putting in a stuff like a scapetail. Adding Parts cleaner on the way Increase workmanship by coating but need attention. One point of coloring of Shreo's Grip which is the life of this product blurs with Parts cleaner, so overworking is strictly prohibited.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
With the feeling that we used about 200 km at Touring, it is about the same as OEM.
I did not notice it. Good feeling Grip compared with OEM is good impression. But as expected to not slip.
[Is there anything I was disappointed about?]
Sand and Garbage tend to collect easily in the groove of a fine Grip.
【Hope for Manufacturer - Please let me know if you have any improvement points]
As Axel's base on the side of the Throttle side has a brim, I wanted to have a groove in addition to Grip.
After that it is difficult, but it feels smooth and I feel a soft Grip without changing the Grip diameter.
【Have you compared items?】
DominoGrip / Super MotorcycleGrip
[Others]
View detail
Fits: その他 For medium to large displacement millimeter (22.2mm) handles only.
If you do not ask for a lot of features and looks, enough
Although the price is less than 500 yen and the price is cheap, I do not feel particularly disadvantageous compared with the things and OEMs I have used until now.
Refresh at almost all Rose except for Engine this time... It was saved because Alecolle took money in plain.
View detail
Fits: HONDA CB250RS, HONDA CB350, HONDA CBF600, HONDA CBR125, HONDA CBR150R, HONDA CBR400F, HONDA CBR600F, HONDA CBR750, HONDA CBX125, HONDA CBX125, HONDA CD250, HONDA CM400, HONDA CX400, HONDA CX500, HONDA GB400, HONDA GB500, HONDA NS250, HONDA NSR150, HONDA NSR150, KAWASAKI Z1000 MkII
I think it's good.
Plus side : Price is cheap, around (grip) Soft, I think that it is good not to get stiff even in cold weather, individuals with many vibrations.
Minus surface : Grip becomes thick (About Grip heater included) So, for those who are Small in hands, depending on the angle of Handlebar, the thickness increases, Lever and Handlebar (Core of) There is a possibility that the thing may feel distant and it may be difficult to walk around so I think that the evaluation will break up.
Because my FUSION can not adjust the angle for Normal handle, I felt it slightly upward more than to Upright (Feeling holding down from above) became.
Because it is a Scooter which does not hold down even Positionally, the difference of several millimeters is sensuously pretty much Large.
Recommended for those who can adjust Handle position based on the thickness of Grip.
On the other hand, Direct feeling of Handlebar becomes thin, so I feel dull when I turn around.
View detail
very good
Similar items on the nearby SHOP were sold at around 800 yen.
The items purchased this time are satisfied because there are several kinds of Design and the price is cheap, too..
Design is easy to grasp with Simple.
Especially it can be used without problems.
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Easy to use
A bit thick, easy to use ♪ slippery and slim small grooves
I think that hands are hard to hurt even for a long time.
I also think I will purchase this Grip next.
View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
Product review
It's a very nice grip. quality material nice design The process of inserting only 1-2 steps is done. Suitable for a wide range of applications both near and far. Helps reduce vibration while driving Tighten the accelerator pedal time and can withstand dust and water without slipping and deterioration. I have used it to travel more than 500 km at once and will continue to use it on longer trips. It is a very handsome casing. Quality material Good design Step in just 1-2 steps to complete. Suitable for a wide range of applications both near and far. Reduces vibration while driving. Accelerated accelerator accelerator And can withstand dust and water without slipping and wear. I used to travel more than 500 km at one time and it is used to travel further. (translated by Google Translator) View detail
Fits: KAWASAKI GPZ250R, HONDA CB500F, HONDA PCX150, KAWASAKI Z250FT, YAMAHA MAJESTY250(ALL MODEL), YAMAHA MAJESTY250C(ALL MODEL), YAMAHA FAZER(ALL MODEL), YAMAHA TREET(ALL MODEL), YAMAHA DIVERSION(ALL MODEL), YAMAHA SEROW(ALL MODEL), YAMAHA GRAND MAJESTY(ALL MODEL), YAMAHA Axis(ALL MODEL), YAMAHA Zr(ALL MODEL), YAMAHA YZF750R(ALL MODEL), YAMAHA YZF-R17(ALL MODEL), YAMAHA V-MAX(ALL MODEL), YAMAHA T-MAX(ALL MODEL), YAMAHA FZX250(ALL MODEL), YAMAHA FZr500(ALL MODEL), YAMAHA DT200(ALL MODEL)
Is it a little hard?
I am interested in the number of impressions and evaluation and purchased. It sounds like a hard grip, but I felt the impression that vibrations are hard to be transmitted. I thought that vibration would come directly if it was stiff, but I was surprised that it decreased. View detail
Fits: その他 For medium to large displacement millimeter (22.2mm) handles only.
A bit short
I used this grip for the Motorcycle that I was riding in the past, now I am riding a motorcycle, but it is still a bit short.
I do not slide and cospa good so I love you.
Those who care about the gap need a Grip spacer.
View detail
Surprisingly satisfied
It was easy to install. It is also Accent of Handlebar, it feels nice. A little more, if it is a dark color, it is still better. View detail
Fits: KAWASAKI ELIMINATOR250 V, KAWASAKI ELIMINATOR 250V
Installed normally, you can use it normally
It may be slightly higher. I do not feel that it is particularly light.
I do not understand the meaning of the limit of the number of characters of evaluation.............................................
View detail
There is a defect in the item description.
Web! Ke 's item It is written in the product information column of Page as follows.
[Contents] : Bar EndBody×2 (For 22 Φ)
[Size]
Outer diameter : 22. 2Φ / Total height : 20mm
Fit Handlebar inner diameter : Φ 14 - 19 mm ← here
Handlebar Insertion : Φ18mm
[Specification]
Anodized Finishing
Rubber Bush installation
There is a conforming inner diameter Φ 18 ~ 19? For the actual endorsement of the product
The diameter of the Rubber Bush itself is also 18 mm, and it can not be attached to the Handlebar with the inner diameter of 16?.
Although I bought it by trusting the explanation, since it is not likely to be in our Handlebar
I'm rolling on the desk unused.
I think that the thing itself is definitely a good thing
It does not become completely usable.
View detail
Fits: YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX600, SUZUKI GSX400, SUZUKI GSX250S Katana, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
Black Rubber Grip
Great looking grips, they fit perfectly on my 2005 SR400. Really well priced too so great bang for buck. They are fit on in about ten seconds and provide a nice grip and comfort. I can highly recommend this product! View detail
It is good for the price!
Since I exchanged Handlebar, Bar End for for STD can not be used
I exchanged it because I had used Large until now.
Personally shape and Large Ku Color and price are satisfied Large change satisfied!
Since there are coarse parts in detail, it is full mark if there is not there
View detail
Fits: SUZUKI address V125, SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI address V125, SUZUKI ADDRESSV125 [ADDRESS].
It can not be attached to ADDRESS V125S
Spring's Brake The part on the side of the rebaer was poorly built and could not be fixed straight.
I used it fixed in an oblique state, but it is planned to process it with File at a later date.
Resemblance.
View detail
Just right
Buy Throttle and Grip and purchase simultaneous purchase to fill the gap between Grip and Switch. There is no problem with installation and gaps are gone and clear. View detail
Fits: KAWASAKI GPZ250R, HONDA CB500F, HONDA PCX150, KAWASAKI Z250FT, YAMAHA MAJESTY250(ALL MODEL), YAMAHA MAJESTY250C(ALL MODEL), YAMAHA FAZER(ALL MODEL), YAMAHA TREET(ALL MODEL), YAMAHA DIVERSION(ALL MODEL), YAMAHA SEROW(ALL MODEL), YAMAHA GRAND MAJESTY(ALL MODEL), YAMAHA Axis(ALL MODEL), YAMAHA Zr(ALL MODEL), YAMAHA YZF750R(ALL MODEL), YAMAHA YZF-R17(ALL MODEL), YAMAHA V-MAX(ALL MODEL), YAMAHA T-MAX(ALL MODEL), YAMAHA FZX250(ALL MODEL), YAMAHA FZr500(ALL MODEL), YAMAHA DT200(ALL MODEL)
One favorite item
Once I knew the goodness of Eye Grip I became addictive. Motorcycle change NORMAL is difficult to grasp immediately purchase. Silver became a feeling good to match with car body color and Handlebar.
View detail
It's neither good nor bad
Although it is an ordinary Handlebar Grip, I think that the feeling of grasp is good. Because it is cheap, I felt Cost performance is also good. After ordering, I noticed that Handlebar End is not a type that is Penetrating, I processed it myself. View detail