Reviews
Fits: KAWASAKI , KAWASAKI ZX-10R, KAWASAKI ZX-25R, KAWASAKI ZX-6RR, KAWASAKI ZX-4R
？？？
Ummm, hmm….
I have a gap between Handlebar End and Lever Guard.
Is the conformation information correct?
View detail
CrabHook
I used it with Jay Trip's Endurance Hook and was able to secure it without any rattles.
As mentioned in other reviews, Bolt looked very cheap in Uniqlo!
View detail
Cutting marks were left behind, but no problem for use.
[How is it used?
It is a recent trend for any Circuit to make it mandatory.
Are you going to be in MotoGP? I thought so and did not put it on, but finally it seemed inevitable, so I bought it.
Was the one you received as per Image?
It was a little different.
This was my first time purchasing SUPER Now products, so maybe I was expecting too much?
Was the installation difficult?
Since we were trying to install it on the Bar End of a vehicle that had been overturned, we had to start with the BALI removal of the Handlebar, which was a difficult task.
Also, please note that if you tighten the Screw too much when it is not inserted into the Bar End, the Gold part that opens inside will break in the worst case.
How was your experience with it?
They are very Guard.
It is just the right length, and the one piece gives a sense of security.
Above all, it gives the impression of Racer all at once.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Although not visible once finished, there was a small amount of BALI left at the root of the Gold part that is inserted into the Bar End.
It doesn't interfere with performance in any way, but I was a little disappointed because I had heard the name SUPERNOW so often.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
rigid
I was worried about whether there would be any deflection since it is fairly meatless, but no problem.
More stable and easier to hang than Bobbin type.
It is also good to not have to worry about pushing and damaging the Swing Arm in the event of a fall.
View detail
Purchased for ApriliaRS660
I bought this for ApriliaRS660, but when I ordered it in M6Size, the boss was very Small and I stopped installing it. Now I am installing the one I bought separately. The quality and color of the product was very good, but I was disappointed. View detail
We hope that GSX-R125User on the Circuit will find it useful!
Reasonably priced yet high quality, we recommend these Rear Sets to all riders on the Circuit.
As is common with cheap Rear Sets. They use soft Material." "The workmanship is not good, and the assembly requires machining." Beg's Knurl process slips laxly." Bolt nut loosening. The Knurl process is so intense that it does not allow any slippage at all, and the strength of the Knurl is such that it transmits the entire input to the car body when stepping on it.
(but the bottom of Boots is incredibly reduced)
View detail
Fits: SUZUKI RGVγ-250, SUZUKI RGV250γ, SUZUKI RGV250γ
it is normal
I had the color that came with Sugaya Chamber, but I replaced it for a change.
No problems with installation.
Sugaya Chamber attached color is also Material:Since it was Aluminum, I do not know about the lightening by Waist of the color.
I am glad that Nut is clean.
View detail
It is the best cospa
DAYTONA Multi Footpeg style eccentric footpeg is used but Quantity:The footpeg in the set was too long and grounded during cornering. And the anti-slip coating was not good enough.
Most Rear Sets Footpegs have a Plate and a Bolt on the side to hold the bar in place, but this Footpeg has a Bolt on the outside to hold it in place, making it ideal for a Multi Footpeg. The length is just right. The positioning pin is not usable, but if you tighten it enough, it will not loosen.
The Merit of the Largeest is that the Boots do not slide on the Footpeg, and the Rear Brake is now stable.
I chose the Orange color and it matches the Pedal and has a nice custom look.
The supplied bolt was too long, so I purchased an M8x15 cap bolt separately.
View detail
For those who have problems with Rear stand
Purchased for YZF-R6 Rear stand, can be installed with Bolt On.
It is super lightweight with a considerable amount of meat removal. The back of the Level is particularly artistic.
Compared to the conventional Spool type, the distance between the Swing Arm and the Rear Stand is greater, making it extremely effective in preventing scratches.
Bolt holes can be prevented from being damaged when tipping over. In addition, the force required for jack-up is reduced.
The quality is quite high and the Cost performance is the best. I can recommend this product.
View detail
super now rearset
i wanted a set that ad their own shifter and brake lever as they are going on a track only bike and i could still use te stock units if something happened when the bike went down. they came in a boc partially assembled thankfuly as here are no instructions. some of the parts came apart as they are tinger tight assembled in the box. The supernow website has good picures and even has individual pars for purchase. once assembled with loctite and installed on the bike i instantly knew these were going to be much beter. better position, traction, good quality constuction and strong feel from the parts. he adjustability for the shifter is nice and the lock nuts are an added piece of mind for assembly. the shipping was vauge but the got here in a few more days then it said but i figure thats international shipping. i would buy these again and recomend them to anyone loking for a nice set tha wont break the bank. i am also greatful o be in the USA and have the ability to find a place who stocks and sells parts fot the TZR 2500 3XV as there are no real sources for parts here. thank ou Super Now and Webike David Baldwin View detail
Improved footwork
[How is it used?
Back64, Up59, and just a little bit of riding.
Was the one you received as per Image?
As per Image.
Was the installation difficult?
Brake Side does not have an instruction manual, so you have to search on the Net to find the Image.
How was your experience with it?
Position is not bad, feeling of Shift lever and Brake lever inside.
[Included Parts:were they on?
Included Parts:are all there, I should have bought a spare footpeg with it.
[Was there anything that disappointed you?
Since Shift's LINK is long, the Back and Up amount had to be the most Large.
Other items that would be helpful
Brake Side installation diagram, only Spring and Switch parts need pictures.
View detail
Lightweight, cool looking
Quintessential lightweight Type, Quantity:Pair (for Left and Right) and weighs only about 50 grams.
It is also good to see a lineup of black, which is often not the most common color.
It worked fine with J-TRIPSTAND.
I was concerned about the rigidity of the product since it is very thin-walled, but there were no problems at all.
View detail
Cool processing shop.
It is good that it doesn't interfere with my work etc. because it doesn't stick out too much. View detail
Fits: APRILIA RSV4, HONDA CBR600RR, KAWASAKI ZX-25R, SUZUKI GSX-R125, SUZUKI GSX-R150, HONDA CBR1000RR-R, KAWASAKI ZX-10R, KAWASAKI ZX-4R
Position is easy
I was not sure about A Type, but I bought this one.
Installation is only a matter of replacing the Top Bridge if it is removed, but it is possible to relocate the Master tank (Material:Aluminum 60mm bracket installation relocation), Brake hose replacement if possible (I removed the Brake hoseMounting Bracket near the Radiator to increase the range of motion a bit) Clutch Wire is short (Wire routing will be changed &arrarr;WireLong Type) I might have been better off asking PRO to do the CouplerBracket relocation, etc., for the Front fork. (Individuals can also do this)
View detail
This Type is recommended for Racing Stand
The design was more linear, but the functionality is fine and the price is lower than other companies. View detail
Robust and Slider effect. (Bitter smile)
The texture is unquestionable. The shape does not interfere with Lever and does not affect its operation.
It is designed for s1000rr and fits perfectly with the handlebar inner diameter.
I think the general method of fixing is to tighten the Bolt and open the flower-shaped collar to fix it in place.
I was impressed by the fact that the Spacer is located at the Bar End and does not interfere with the Throttle, which is well designed and manufactured. (Some things interfere with the Throttle and prevent Axel from returning or make it reluctant to move...)
Also, I had an unintentional fall at the RightCorner during a Race once. I fell at a decent speed, but thanks to the Lever Guard, which played the role of a slider, the damage around the handlebar was considerably reduced.
I was so overwhelmed by the sturdiness of the product that I am still buying and installing the same product Repeat.
View detail
It is the best cospa
It was about half the price of other manufacturers, but it was the only one available at the time, so I ordered it out of necessity.
As a result, I was betrayed in a good way.
I'm sorry you think that because the price is low, it's not well made or durable enough.
I have had no problems at all with durability, making and Fitting.
In fact, the Manufacturer's product I used to use, which cost twice as much, was worse in terms of fitting.
I have a durable type in addition to the lightweight type I bought this time, so I will switch to that one if necessary.
View detail
Repair Parts
Although footpegBody uses the Battle factory
I bought it because I thought it could be used for Repair.
The type is fixed with a bolt nut, so it seems to be hard to loosen.
The non-slip also seems to have a good bite.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA TZR250R, SUZUKI RGV250γ, SUZUKI RGV250γ, SUZUKI RGV-Γ250, SUZUKI GSX-R600, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI ZX-10R, HONDA RVF, HONDA NSR250R, HONDA CBR400RR, HONDA CBR250RR, HONDA CBR250R, HONDA CBR150R, HONDA CBR1000RR-R
conscientious pricing
It's similar to a certain company's Handlebar, but the price is much lower.
I bought Lever Guard at the same time and both are very good.
View detail
It's a reasonable price, and if it's a little bent, it can be fixed.
Lever Guard is useless unless it is integrated like this.
SUPER Now's prices are reasonable.
View detail