Reviews
Fits: HONDA CRF250L, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR250 R (MC41) FNo: MC41-1000001-1099999, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR250 R (MC41) FNo: MC41-1000001-1099999
KITACO Gasket Commerce ProductNo : 70-967-33010
Every time you replace Oil Filter (In my case every 10,000 km travel) , Oil Filter Cover.
Even if you open and close it about once, the possibility that Oil will leak from this Gasket is low.
(Until now, Oil has never stained with one reuse. )
However, when reusing it twice as 3 degrees, Oil seeps out from Gasket.
If it is about that, a little Oil Filter CoverBolt 4 books etc etc etc. Gently tighten up and tighten the Oil bleed off will stop.
However, if it becomes the reuse of the Gasket after the fourth time, it seems that oo leaking from Gasket is commonplace and even if GasketCover bolt is tightened again, Oil leakage will not stop.
Moreover, Oil Filter CoverBolt was relentlessly tightened to try to stop oozing out from Gasket, resulting in a scourge that cuts Oil Filter CoverBolt Screw. I arrived.. (Crying)
Kakun and Ratchet gently turned around during retightening, and Oil was overflowing all over from the periphery of Oil Filter Cover at that moment. (Large cry)
In order not to do such a thing, Oil Filter Cover's Gasket is trying to exchange as frequently as possible.
Large body once every 20000 km (Gasket is reused once). )
2 times reuse (Traveling 40000 km) During (When inventory is not at hand) I applied and followed a Liquid Gasket a bit if I was not glad to see the state of Gasket but basically every 20000 km running (Once every two years) I try to replace Gasket with a new one.
It is GasketQuantity : 1 Set of 4pcs. Because it's minutes Quantity : 1pc. Traveling 20000 km (2 years) So, at least only after this Gasket stock is running 80000 km (8 years) It will be a sustainable calculation.
It was cheap at WebikeSale, so I bought it too much. (Lol)
I think that I will let you use it for Large without wasting it even if I overpurchase it.
At the time of storage, we recommend that you do not place heavy objects on this new Gasket and that you should be careful not to break this brand new Gasket.
I keep inventory of this KITACO Gasket together with lightweight parts such as Oil Filter and RingWasher in a parts box only.
.
View detail
Fits: HONDA CRF250L, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR250 R (MC41) FNo: MC41-1000001-1099999, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR250 R (MC41) FNo: MC41-1000001-1099999
KITACOKITACO Gasket
【What made you decide the purchase?】
This KITACO Gasket, HONDA CRF 250 L (MD38) / CBR250R (MC41) It is a dedicated Gasket.
In Gasket of Other Company Product except HONDAOEM Product, there is only this KITACO Gasket.
It was a bit cheaper than Gasket of HONDAOEM Product so I bought a large person.
【How was it actually used?】
We are replacing Gasket at a rate of once every 4 engine oil changes and 2 every Oil Filter Element change.
Quantity this KITACO Gasket every 20000 km traveling : 1pc. It will be a calculation to consume.
If you replace the Gasket newly, it will not exit the Oil leak or the Oil exudation at all.
【Mounting was difficult?】
Oil Filter Element When exchanging, we only exchange the existing Gasket and this new KITACO Gasket. it's simple.
【Please tell me the installation point and hang】
Oil Filter Element If you do not exchange Gasket even after replacing it, apply Liquid Gasket to its existing old Gasket and reuse it.
Once it is reused in Liquid Gasket, I will try to replace it with this new KITACO Gasket.
[Is there anything I was disappointed about?]
It is a funny story to say disappointment, but the probability of Oil leakage and oil leakage is high when reused.
(Of course it is natural.. Excuse me. )
【Hope for Manufacturer - Please let me know if you have any improvement points]
You will not be able to reuse this KITACO Gasket as many times as you can. Excuse me.
【Have you compared items?】
I compared it with Gasket of Honda OEM.
Together with this KITACO 's Gasket, I tried to observe the detail carefully but I did not understand the difference between each product.
Perhaps the manufacturer may be the same place for HONDAOEM Product and KITAC product. I think it surely is.
[Others]
I asked Quantity this KITACO Gasket : 1 Set of 4pcs. Since I have it, Quantity : 1 Set of 4pcs. X 200,000 km = 80000 km If you do not run the next opportunity to buy this KITACO Gasket will not come. About 8 years later (sweat) It's far.
.
View detail
Fits: KAWASAKI ZZR400 ZX400-N6S FNo: ZX400N-036001-, KAWASAKI ZZR400 ZX400-N6S FNo: ZX400N-019001-036000, KAWASAKI ZZR400 ZX400-N6F FNo: ZX400N-036001-, KAWASAKI ZZR400 ZX400-N6F FNo: ZX400N-019001-036000, KAWASAKI ZZR400 ZX400-N5-N11 FNo: ZX400N-036001-, KAWASAKI ZZR400 ZX400-N5-N11 FNo: ZX400N-019001-036000, KAWASAKI ZZR400 ZX400-N5 FNo: ZX400N-036001-, KAWASAKI ZZR400 ZX400-N5 FNo: ZX400N-019001-036000, KAWASAKI ZZR400 ZX400-N11 FNo: ZX400N-036001-, KAWASAKI ZZR400 ZX400-N11 FNo: ZX400N-019001-036000, KAWASAKI ZZR400 ZX400-N4 FNo: ZX400N-015001-, KAWASAKI ZZR400 ZX400-N4 FNo: ZX400N-000001-015000, KAWASAKI ZZR400 ZX400-N1-N4 FNo: ZX400N-015001-, KAWASAKI ZZR400 ZX400-N1-N4 FNo: ZX400N-000001-015000, KAWASAKI ZZR400 ZX400-N1 FNo: ZX400N-015001-, KAWASAKI ZZR400 ZX400-N1 FNo: ZX400N-000001-015000, KAWASAKI ZZR400 ZX400-K3 FNo: ZX400K-017001-, KAWASAKI ZZR400 ZX400-K3 FNo: ZX400K-000001-017000, KAWASAKI ZZR400 ZX400-K1-K3 FNo: ZX400K-017001-, KAWASAKI ZZR400 ZX400-K1-K3 FNo: ZX400K-000001-017000
Used for antlion's Oil filler
antlionantlion : 30101-BK Oil ring is not attached to Oil Filler Cap so we bought this item at the same time and it got excited.
You can also use the O-ring about the OEM filler of the OEM, but I wanted to replace it with a new one.
After examining it, OEM Product's O-ring is 173 (tax included) So it's not as Cost-like.
In order to order OEM Parts Number with Wei Big, it takes time and effort for confirming e-mails, so the difference is a place such as a cost.
View detail
Fits: HONDA CRF250L, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR250 R (MC41) FNo: MC41-1000001-1099999, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR250 R (MC41) FNo: MC41-1000001-1099999
★KITACOGasket★
【What made you decide the purchase?】
I used to use Gasket of OEM Product before, but recently it is almost like using this KITACOGasket.
Since Gasket is basically a consumable item, I always try to have more than one stock.
This KITACOGasket at Webike was cheap at Sale items this time, so I bought a lot more. (Lol)
【How was it actually used?】
Like the OEM Gasket, this KITACOGasket also prevents engine oil leakage and ooze out firmly.
This KITACOGasket is a reliable Gasket that you can use with confidence.
【Mounting was difficult?】
Just pinch this Gasket when closing the Oil Filter Cover.
However, if you do strange way of closing such as being biased, it will crush the brand new Gasket and cause Oil leakage and Oil leakage (Failure) If you fail, I think it would be better to give up and exchange again for a new Gasket.
【Please tell me the installation point and hang】
When installing this KITACOGasket, attach Engine oil to the fingertip and apply it on both sides of Gasket and then peel off smoothly at the next removal, so it will be hard for the Gasket to bear a burden so I will reuse the Gasket once more Can do.
(I am doing it twice.. )
[Is there anything I was disappointed about?]
Nothing in particular.
When using this KITACOGasket at the time of brand new, do not leak the Engine oil surely Excellent There is no betrayation of expectation.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Nothing in particular.
【Have you compared items?】
I compared this KITACOGasket with HONDAOEM 's Gasket, but the price was about the same, and it was not possible to judge the difference and superiority of each other in terms of performance.
[Others]
I am trying to exchange this KITACOGasket basically every 20000 km traveling.
As you can see in the picture, I have bought several pieces in case of emergency, but it is not something that is going to decrease quite often (Lol)
.
View detail
Fits: HONDA CRF250L, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR250 R (MC41) FNo: MC41-1000001-1099999, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR250 R (MC41) FNo: MC41-1000001-1099999
Gasket for Oil Filter Cover
【What made you decide the purchase?】
I am trying to exchange Oil Filter Cover's Gasket with every Oil Filter replacement.
Oil may bleed out from Gasket of Oil Filter Cover if it is used for about 2 years.
I used HONDAOEM 's Gasket for Oil Filter Cover because it was the cheapest, but because WebEke sometimes HONDAOEM 5% OFF, OEM Product is also cheap, but with Webike this GITETET of KITACO is 5% OFF It was less expensive than OEM Gasket.
When considering mileage, once for every 20000 km, I think that I will exchange Oil Filter Cover 's Gasket only once every two years, considering the period, but this KITACOGasket is about several ten yen lower than usual I do not have to jump at, but it is me who flew away (Lol)
【How was it actually used?】
Just replace this new KITACOGasket and hold down the Oil Filter Cover and tighten the four Mounting Bolt 4 "Kyoto" with the power of your fingertips so that Engine oil will not come out.
【Mounting was difficult?】
Oil Filter It's so easy to exchange this KITACOGasket as it is replaced..
【Please tell me the installation point and hang】
If you exchange this KITACOGasket, let's check for Oil leakage Oil leakage from Gasket for a while.
Oil Although it is leaking, even if Oil is in the Engine until the LOW Line of Engine 's Oil gauge, it is Large durable at all.
While watching the situation, tighten Bolt of Oil Filter Cover little by little to stop Oil leakage and Oil leakage from Gasket.
[Is there anything I was disappointed about?]
Although it is not a story to be disappointing, I thought Oil had leaked out to Gasket, but for one year (12000km) I just rode.
If Oil is in the Engine, it is Large.
【Hope for Manufacturer - Please let me know if you have any improvement points]
nothing special.
【Have you compared items?】
It compared with OEM Gasket of HONDA.
.
View detail
Fits: HONDA XL250S L250S, HONDA NY50 All models, HONDA CROSSCUB110 JA10, HONDA All models of GIORNO CREA AF54, HONDA SUPER CUB 110 JA10, HONDA SUPER CUB 110 PRO JA10, HONDA SUPER CUB series Engine cars (50-100cc), HONDA SUPER CUB series Engine car FI, HONDA Spacy50 All models, HONDA DREAM50 AC15, HONDA Spacy80 All models, HONDA VARIE All models, HONDA MONKEY series Engine cars (50-100cc), HONDA MONKEY series Engine car FI
It is not in the conformity table, but attached to BENLY 90.
Although I bought another company's Gasket and wrote it in the conformity table, I saw a little painful eyes that Size goes around Large one time, but as I thought it was a suspicion, the previous use of Gasket was still mentally good I bought this Gasket by betting.
Win a superb bet. Apparently, the ExhaustSize of the CUB Engine seems to be a large body together (It may not be possible to say unconditionally as it may be different depending on the year)
The price is also cheap, and there seems to be no exhaust leak. relieved.
View detail
Fits: KAWASAKI ZZR250 EX250-H15-H7F FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H15-H7F FNo: EX250H-A17453-A18401, KAWASAKI ZZR250 EX250-H15-H7F FNo: EX250H-000001-, KAWASAKI ZZR250 EX250-H13 FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H13 FNo: EX250H-A17453-A18401, KAWASAKI ZZR250 EX250-H13 FNo: EX250H-000001-, KAWASAKI ZZR250 EX250-H10 FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H10 FNo: EX250H-A17453-A18401, KAWASAKI ZZR250 EX250-H10 FNo: EX250H-000001-, KAWASAKI ZZR250 EX250-H1-H10 FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H1-H10 FNo: EX250H-A17453-A18401, KAWASAKI ZZR250 EX250-H1-H10 FNo: EX250H-000001-, KAWASAKI ZZR250 EX250-H1 FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H1 FNo: EX250H-A17453-A18401, KAWASAKI ZZR250 EX250-H1 FNo: EX250H-000001-, KAWASAKI ZZR250 EX250-H15-H7F FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H15-H7F FNo: EX250H-A17453-A18401, KAWASAKI ZZR250 EX250-H15-H7F FNo: EX250H-000001-, KAWASAKI ZZR250 EX250-H13 FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H13 FNo: EX250H-A17453-A18401
Mr. Kita, thank you..
It is very helpful to sell alternatives of such OEM Parts Number. The price may be slightly more expensive than the OEM, but you can save the trouble of ordering.
I am grateful to KITACO..
View detail
Fits: KAWASAKI ZZR250 EX250-H15-H7F FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H15-H7F FNo: EX250H-A17453-A18401, KAWASAKI ZZR250 EX250-H15-H7F FNo: EX250H-000001-, KAWASAKI ZZR250 EX250-H13 FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H13 FNo: EX250H-A17453-A18401, KAWASAKI ZZR250 EX250-H13 FNo: EX250H-000001-, KAWASAKI ZZR250 EX250-H10 FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H10 FNo: EX250H-A17453-A18401, KAWASAKI ZZR250 EX250-H10 FNo: EX250H-000001-, KAWASAKI ZZR250 EX250-H1-H10 FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H1-H10 FNo: EX250H-A17453-A18401, KAWASAKI ZZR250 EX250-H1-H10 FNo: EX250H-000001-, KAWASAKI ZZR250 EX250-H1 FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H1 FNo: EX250H-A17453-A18401, KAWASAKI ZZR250 EX250-H1 FNo: EX250H-000001-, KAWASAKI ZZR250 EX250-H15-H7F FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H15-H7F FNo: EX250H-A17453-A18401, KAWASAKI ZZR250 EX250-H15-H7F FNo: EX250H-000001-, KAWASAKI ZZR250 EX250-H13 FNo: EX250H-A18402-, KAWASAKI ZZR250 EX250-H13 FNo: EX250H-A17453-A18401
I am saved..
Oil Filter of Other Company Product has many O-rings not attached so it was saved because we did not have to order OEM Product. Quality is not an issue now.. View detail
Fits: KAWASAKI KLX250 LX250E All models, KAWASAKI D-TRACKER LX250E All models, KAWASAKI D-TRACKERX LX250V All models, KAWASAKI KLX250 LX250S All models, KAWASAKI KLX250-R LX250E All models, KAWASAKI KLX250-ES LX250E All models, KAWASAKI KLX250-SR LX250E All models, KAWASAKI ZX-10R, KAWASAKI KLX300R LX300A All models, KAWASAKI ZX-6 R, KAWASAKI ZX-6R, KAWASAKI ZX-6 RR, KAWASAKI SUPER SHERPA KL250G, KAWASAKI NINJA2 Helmet50RSL BX250A
Cheaper than OEM Parts Number
I used it for D-TRACKER 250.
Size fitted securely for installation, about 4 months passed after installation, there is no exhaust leakage.
It is cheaper than Gasket of OEM Parts Number, so it is recommended.
View detail
Fits: YAMAHA SR400 1JR, YAMAHA SR400 3HT1-9, YAMAHA SR400 3HT1-A, YAMAHA SR400 S 1JR, YAMAHA SR400 S 3HT1-9, YAMAHA SR400 S 3HT1-A, YAMAHA SR500 1JN, YAMAHA SR500 3GW1-9, YAMAHA SR500 S 1JN, YAMAHA SR500 S 3GW1-9, YAMAHA TX650 All models, YAMAHA V-Max1200 3UF All models, YAMAHA XT250X 5C11-, YAMAHA SEROW250 3C51-55, YAMAHA SEROW250 FI 3C56, YAMAHA SEROW250 FI 3C5C, YAMAHA XG250 TRICKER 5XT1-7, YAMAHA XG250 TRICKER(FI Vehicles) 5XT8-A, YAMAHA ROYALSTAR1300 4WY1-, YAMAHA ROYALSTAR1300 TOUR CLASSIC 4WY1-
Feeling refreshed
Exchange Gasket as I unload Engine.
Although it is a consumable item, it is not a Parts to exchange so frequently, so only at such a time.
Since Parts of this part have initial expansion and contraction due to heat, be sure to always tighten after tightening.
View detail
Fits: KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H5 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H5 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1-H5 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1-H5 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-G1A FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [Super Sherpa] KL250-G1A FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-G1 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-G1 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H5 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H5 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1-H5 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1-H5 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-G1A FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [Super Sherpa] KL250-G1A FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-G1 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-G1 FNo:KL250G-000001-
I bought a peace of mind.
At the time of exchanging the Oil Filter of the D-tiger, the O-ring of the lid was exchanged at the same time.
Comparing the original O-ring with the new O-ring, the older one stretched a little and the elasticity was declining.
Although it is a cheap part, it is safe if you exchanged without making a mistake..
View detail
Fits: SUZUKI Sky Wave 250, SUZUKI Bergman 400, SUZUKI Bergman 200, SUZUKI Sky Wave 400, SUZUKI Avenis 150, SUZUKI Gemma., SUZUKI Avenis 125, SUZUKI address V125, SUZUKI address 125, SUZUKI swish
It is an ordinary Slider
I installed it because it was interesting and there was writing that was hard to install with Impre of the other person.
The back plate is an OEM Product, but it caught with your fingers without being extremely tight or loose.
Even if you drive, the sound does not feel unusual, but it seems that the feeling of acceleration has changed slightly.
View detail
It could also be used for CT110
Although I thought to exchange the OEM Parts Number by replacing the Oil seal of CT110, I understood that it can be used as an alternative and purchased OIT seal made by KITACO. I was able to install it safely.
Since the CT110 series Parts gradually disappears OEM Parts Number, I think that it will be useful if there is an alternative Parts list.
View detail
Fits: KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H5 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H5 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1-H5 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1-H5 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-G1A FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [Super Sherpa] KL250-G1A FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-G1 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-G1 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H5 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H5 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1-H5 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1-H5 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-H1 FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-G1A FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [Super Sherpa] KL250-G1A FNo:KL250G-000001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-G1 FNo:KL250G-009001-, KAWASAKI SUPER SHERPA [SUPER SHERPA] KL250-G1 FNo:KL250G-000001-
Oil Filter upon replacement.
I bought it for Oil Filter for Replacement of KLX 250.
Especially it was able to be exchanged without problems.
Packing kind is leaked since it leaked, so it is Large strange, so if you remove Rubber series like ОО Ring, exchange is recommended.
View detail
Fits: SUZUKI ADDRESS110 CF11A, SUZUKI ADDRESS V100 CE11A, SUZUKI ADDRESS V100 CE13A, SUZUKI STREET MAGIC 110 II TR110S CF12A, SUZUKI STREET MAGIC 110 II TR110SD CF12A, SUZUKI STREET MAGIC 110 TR110S CF12A, SUZUKI STREET MAGIC 110 TR110SD CF12A
It is a standard in the classic..
It is a staple in the classic of Exhaust Gasket.
It is always this..
It was as usual as usual Package.
Compatible models are abundant, so you can use with confidence.
Of course there is no problem on quality.
Including different models, I have purchased many times, but it is an outstanding sense of stability.
I will continue to use it in the future.
View detail
Fits: YAMAHA FJR1300 A, YAMAHA FJR1300 AS, YAMAHA FZ-1 S 3C3G, YAMAHA FZ-1 FAZER 3C3G, YAMAHA FZ-1N 2D1A, YAMAHA FZS1000 S, YAMAHA FZS1000, YAMAHA MT09 1RC8, YAMAHA MT09 2DRC, YAMAHA MT09 A 1RC8, YAMAHA MT09 A 2DRC, YAMAHA MT09 ToRacer 2SC8, YAMAHA TT250 R RAID All models, YAMAHA TT250 R All models, YAMAHA WR250 R 3D71-79, YAMAHA WR250 R 3DA-D, YAMAHA WR250 X 3D71-79, YAMAHA WR250 X 3DA-D, YAMAHA YZF-R1, YAMAHA YZF-R1 S
Was the individual who arrived at my place bad?
Purchased when exchanging WR250R Exhaust pipe. I am glad that the price is cheap - - - - Surface treatment of items that arrived at my place is coarse (A little dent? I knew that things like BALI.
The Exhaust Gasket originally attached to the regular is a beautiful thing "Is it better for you to use the old one like this?" I also thought that relatively clean processing was done on the Engine side. (Of course I removed BALI)
I do not have to be cheap or not.
Fortunately it seems that exhaust leakage has not occurred with the feeling that it looked lightly.
View detail
Fits: HONDA CRF250L, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR250 R (MC41) FNo: MC41-1000001-1099999, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR250 R (MC41) FNo: MC41-1000001-1099999
KITACOKITACO Gasket
This KITACOKITACOGasket quotient ProductNo : 70-967-33010, how HONDA OEM (378 yen) It was higher than.
However, if you introduce about 1000 characters in this KITACOKITACOGasket Impression you will receive a Point so the difference (46 yen) There is probably no more.
Depending on the Point, this KITACOKITACOGasket may be more advantageous.
(OEM Product has no Impression and no Point. )
I tried to compare and see each one, but both Material, thickness, Shriet and Extrusion mold looked like the same thoroughly.
I do not understand the difference in use at all..
Both of them initially play the role of Gasket with Bolt 's light tightening force and withstand the maintenance of two to three Element detachments.
After all it was impossible to find a difference on the Hard side of the product.
However, on the Soft side? (46 yen) There is a difference between the existence of Point with Impression and the difference of Point.
Clearly, this KITACOKITACOGasket product No than Product No. HONDA's OEM Product : I thought that 70-967-33010 is a cheaper product, so far this KITACOKITACOGasket quotient ProductNo : I bought and used 70-967-33010.
Although I remember the feeling of loss somewhat, since I am actually writing Impression, I got 150 points.
I'd like to think that I have not lost it ...
Since this Oil Filter CoverGasket is a consumable item, we are planning to purchase more than one, so we will purchase OEM after that.
This KITACOKITACOGasket quotient ProductNo : As 70-967-33010, there is nothing less than Gasket of any OEM Product as a product.
It is a highly reliable product with the same quality as OEM Product.
I can trust it as a product, and there is never anything inferior to OEM Product.
However, it is only that the difference from OEM Product is more than 10 percent higher than the price of OEM Product.
Although it is a product with a high Level that can be Recommendation as a product, we will hesitate to recommend to everyone for the price.
View detail
Fits: SUZUKI Sky Wave 250, SUZUKI Bergman 400, SUZUKI Bergman 200, SUZUKI Sky Wave 400, SUZUKI Avenis 150, SUZUKI Gemma., SUZUKI Avenis 125, SUZUKI address V125, SUZUKI address 125, SUZUKI swish
I tried to replace it from OEM Product.
V Belt As a result of the exchange, we exchanged.
Performance and durability are now to come - -
I feel I could fix it more firmly than OEM Product. OEM Product was falling spoofed but this could be fixed tightly and there was no problem mounting at all.
From now on, durability etc.. I will purchase again if there is no problem.
View detail
Can also be used for CT110 HUNTER CUB!
Compare with CT110 HUNTER CUB Parts List and find that it can be purchased as an OEM substitute.
It is very appreciated that older Motorcycle can be purchased as an OEM substitute as parts become more and more lost.
View detail
Fits: HONDA CB50 S All models, HONDA CB50 All models, HONDA CBR250F MC14 All models, HONDA CBX125F All models, HONDA NSF100, HONDA CBX125 CUSTOM All models, HONDA XE50 All models, HONDA XLR250 R MD16, HONDA XE75 All models, HONDA XLR250 R MD22, HONDA XLR250 R-BAJA MD16, HONDA XLR250 R-BAJA MD22, HONDA XR100R, HONDA XR250 BAJA MD30, HONDA XR250 MD30, HONDA XR100MOTARD HD13, HONDA XR250MOTARD MD30, HONDA XR250R, HONDA XR80R , HONDA XR50 MOTARD AD14 All models
APE100 (HC07) Mounting on
I attached to APE 100.
I ran BEAMS SS 300 SONIC Exhaust System without Gasket, but I was running while driving. At the moment I got it, a huge sound started, soon I noticed. As it is, I ran and returned..
I do not know if Screw was loose or not, I installed it at the same time. It is safe in this.
View detail