Reviews
Fits: HARLEY-DAVIDSON 1996-2011(for Switch box)
It's perfect for Refresh.
I bought this as a Refresh because the Bolt on my Switch box was rusty and not looking good.
OEMBolt is very expensive, but this one is cheap and can be used for OEM same etc.
It's good because if it gets rusty, you can easily replace it.
View detail
Fits: HARLEY-DAVIDSON 1996-2011(for Switch box)
It is effective for Refresh.
I bought this as a Refresh for my Harley XL1200C SPORTSTER 1200 as the Bolt on the Switch box was rusty and not looking good.
The OEM Bolt is incredibly expensive, but this one is far less expensive.
I can use it normally without any problem, so if you are going to buy it, I would definitely recommend this one.
View detail
It's thicker than I thought
I bought it to prevent the Number from cracking due to vibration on a single cylinder. It is thicker than I thought, so I installed it on the back of the License Plate Bracket, and if there is space, I think it would be the strongest if I put it between the Bracket and the Number. View detail
Fits: HARLEY-DAVIDSON
Firm and tightly adhered
It's more solid than some of the cheaper ones that cost about $200, and it adheres well, so the Carburetor doesn't fall off while working.
The cheaper ones don't stick as well and the carburetor often came off while working. In addition to that, they were weak against heat and cracked after 6 months of use.
Then there's durability
I would like to Impression again.
View detail
In a week.
It warped within a week of use. Is it just Rubber, not Gasoline resistant? I'd rather buy per Jims. View detail
คุณภาพดี คุ้มเกินราคา View detail
Fits: HARLEY-DAVIDSON Pump head, HARLEY-DAVIDSON Shovel head, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON DYNAFamily
Used in servicing Dyna coil
I bought this because the length of the high-tension cord became insufficient due to the layout change of IGCoil.
It's about 60cm long, so it's probably compatible with most Motorcycles, and will accommodate those who don't want to place the IGCoil near the Engine, and want to place it behind the carburetor.
High-Tension Cord (Plug Cord) If you are not familiar with maintenance, you may want to cut your bike to your desired length, then take it to a motorcycle shop and pay for the work to be done.
If you hit the IGCoil with a hammer, the coil will break in half and become useless.
Then it's better to pay a little Gold and get a reliable press-in.
If you forget to incorporate the Dust Boots before press fitting, you will have to start over (and the Crimp may not be reusable).
If you apply the wrong amount of pressure when fitting the Dust Boots, the Crimp may fall out (if it is pushed in properly, it will not come out).
IGCoil must be fixed in a vise or a jig to tap, otherwise it will be gapped.
When the work is finished, measure the resistance value to confirm that the value is as per the service manual.
If this value is not correct, it is assumed that there is a problem or inadequacy in the core wire processing or Crimp processing.
So, it is essential to measure the resistance before press-fitting and with no code.
View detail
Bought because of Brake switch failure
This product is different from the description.
In fact, Washer is not included.
The end of the cord is clamped to the terminal.
If it does not fit your Motorcycle, you will need to rewire it.
The make itself is a good one.
View detail
good
The gloves are so cool and fit perfectly. And most of all, it is very comfortable to do activities. I'd like to buy one more. People around me say that I'm cool. I recommend this product. View detail
Fits: HARLEY-DAVIDSON 1996-2011(for Switch box)
You can Refresh Bolt!
I had a Timing to disassemble the Switch housing on my XL1200C SPORTSTER 1200, so I bought a Bolt to Refresh it.
The OEMBolt is older, so it had some White dulling and a little Rust.
I was able to Refresh by replacing it with this one.
It was good, especially since it was so visible.
Also, the Bolt will be changed from Torque to Hex, so it will be easier to do the next maintenance.
View detail
Cheap and easy to use
It is a product that can protect Custom and Wiring easily just by cutting and covering.
You can also choose the size that you want to wear because you can choose the thickness.
I bought it to make a Handlebar Switch, but I can cut it with normal Scissors and it is easy to process.
It's just a tube, so depending on the Ideas, you may be able to use something other than Wiring through it.
The product description said it was heat resistant and fire resistant, so I roasted the remainder of it with a lighter, but the color changed a little, and it didn't burn or burn, and it wasn't even deformed!
This may be the most user-friendly Material you'll ever see for the price!
View detail
High cost performance
My car is a FATBOY by Harley-Davidson, a 2019 model. I lost a few screws on the handle, searched the original part number on the webike, and then bought this sub-factory. The quality is not said. High cost performance. ---------------------------------------------- My car is a Harley-Davidson FATBOY, 2019 model year. Screw on the handle lost a few, the original part number on webike search, and then buy the deputy factory. The quality did not say. High cost. Powered by Google Translator View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON Cars with CVCarburetor, HARLEY-DAVIDSON for XL
Very Good.
This product is simple and nice. It fits well with my sportser (2004 XL1200C). It is also easy to install. Excellent in price and quality. View detail
I like the handle
As you can see in the picture, the shape is sprinkled and the material is sturdy. Shipping was also fast and well packaged. I have installed it temporarily before work, but it has a good shape. The height is 8 inches, and the position is quite comfortable. The chrome details are pretty good too. ------------------------------------------------------------ -------- The shape ppugo like we saw in the picture looks even stronger material. Shipping is also watneyo doeseo well packed fast. Haebwatneunde still attached temporarily to work around the shape yippuge good height also appears adequate 8 inches high position also comes quite easily. Chrome detailing is pretty good. Powered by Google Translator View detail
Fits: HARLEY-DAVIDSON
It's not accurate.
I tried to replace the Iron Spoke because it was rusty, but the angle of the Spoke was slightly different and the umbrella part was not enough meat.
So I installed the original one to remove the rust and used it as a replacement for the broken Spoke, but it still needs to be modified.
View detail
Austere looking.
I like the look of it, and it doesn't contain any gold, so you can cut it with a pair of scissors. However, it is easy to unravel from the cut line, so if you don't cut it after wrapping Vinyl Tape around it, it will unravel soon. I think it's soft and easy to use. View detail
It's easy to exchange.
Rubber blinker lenses aren't very durable and they can fog up in a relatively short period of time. They look shabby and polishing them won't fundamentally clean them up, so replacement is preferable. Guts Chrome's Lens is inexpensive and can be easily replaced. View detail
Good product
I bought this light to turn my old headlight into a modern multi-reflector. The reflectors are of the Gold family, so they are a little more heat resistant. I would like to buy it in parts so that the glass surface can be glued together later. View detail
Caution
There is more than I expected in the carburetor, intake manifold, exhaust system gasket, etc., but the O-ring that attaches to the Knock Pin of the cylinder is not included.
Requires separate purchase.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Others
Setting
I opened the Float Chamber to replace the Slow Jet on the CVcarburetor, but the original O-ring was blistered and couldn't be reused, so I bought it in a hurry.
The shipping was also very cheap.
View detail