Reviews
Looks good for Engine.
The effect was not felt on the ride, but it seems to reduce the load on the Engine. View detail
Necessary items to connect to Air cleanerBox
Not necessary if no Air cleanerBox is available or cannot be connected. View detail
Waterproof property is not good
I bought this for Repair because the original Fender Eliminator License Plate Light was damaged. The light shines well and the visibility is good, but the waterproof property is not so good… Large rainfall causes water to get in… For now, I use it with Duct Tape wrapped around it, but I think it would be better to use it for a long time by coking etc. View detail
It didn't work
I tried to install it, but I have it set to short suspension.
What a surprise, Chain didn't hit Roller ….
I will try to install it again when I change to Normal suspension.
It would have been nice if you could have written something about not being able to use it if it's Lowdown.
A little disappointing.
So we do not know the effect of the installation.
View detail
Required Parts for Change Accent
These are the Parts required for the installation of the Change Accent, but we would like them to be included with the Body.
Change Accent, installed on sr400Final edition. I was not particularly dissatisfied without Assist, but after installation, "Snap" and Shift is entered, and it feels good. Especially, when waiting for a traffic light and putting in Neutral, Stress is also reduced.
View detail
Performs as its name implies
I bought the Habit because it was an overdrive car, or maybe because it had a Neutral between 4th and 5th gear.
The Instruction Manual was difficult to understand, so I installed it with reference to Reviews and other sources.
I was a little concerned about Shift change before, but now I feel comfortable with it. I think I will not remove it for now. I don't think I will remove it for now.
It may not be necessary for those who are accustomed to manipulation and those who find such slight inconveniences to be a taste of SR.
View detail
Still a little expensive.
As you all say, a little expensive.
I'm in the mood to raise the price of Body.
It would be better to make this one cheaper.
It's a product of the year and whether you need it or not.
I know it can't be helped, but …
View detail
Confirmation of MODEL required
Installation is easy. I have been working on it since I purchased it.
The tool compartment has been removed and the hollow Space
I'm installing it only because I didn't like it.
Bore Ace, for better or worse, as improved versions are developed.
(A little sad when an improved version comes out after installation…(lol)) )
There are two types:the old Type? and the improved Type.
for Carburetor？ (may need processing) The improved version is
It can be attached to FI Vehicles. Old Type is
It is not physically attached to the FI, so it is on the bore Ace itself.
I think it would be better to make sure.
Currently I am not sure which one will be delivered.
I was forced to put the old Type on at first.
View detail
It may be hard to tell the difference.
I purchased this product to level the Tank and Seat.
The difference seems to be that those who can understand it, and those who can't, can't understand it at all. He can tell, so he is self-satisfied.
It is a quintessential BOA -Ace beautiful product. Too bad it is not visible.
View detail
Installation includes OEMCover and other modifications!
The OEM cover was used, so the cover and boots had to be modified for installation.
I thought the installation Large strange if you are pretty much a beginner.
The feeling of running, indeed, the feeling of Shift is better…
I'm feeling …
View detail
to fix
Rear Sets are fixed with rust-resistant stainless steel bolts. View detail
Frankly
I bought these because they interfere with the exhaust guard after replacing the bore AceRear Sets. The rear brake is very good. The quality was good as always. View detail
Looks cool.
In the picture, both the Heat Radiation Fin and the first tier have the BORE ACE Logo, but in reality, there is nothing and it looks cheap.
I don't think it absorbs enough heat to feel the effect either.
It seems a bit high in terms of Gold amount.
View detail
Not as much as I thought ….
I use it for SR400.
I installed it on my 17 year old SR400 to improve the GEAR intake.
The quality of the product itself is very high (not visible from outside after installation). However, I don't know if this part is so expensive. I think it's because it's not made in large quantity.
I'm not sure if I'm a bad driver or not, but I didn't feel that much of an effect. If you ask me, I think the GEAR is a little better …? I think so.
I'm going to ride it some more to find out.
View detail
The Instruction Manual was for Rear Sets.
I was able to install it because I was searching for other people's installations, but it would have been nice to have a proper Instruction Manual.
I don't have the impression that it got worse after installation.
View detail
If you're going to install it securely, be prepared.
I bought this because I needed it to install ShiftAssist, and I was able to install it on my 2013 model without any modification.
InstallationInstruction Manual is not included in the package, so I installed it referring to the one I checked on Net.
View detail
Effective but unfriendly.
First of all, it's expensive! 6,000 for all these Parts …
Secondly, the installation instructions are unfriendly.
The Instruction Manual that came with the Change Accent itself was Only if the Sprocket Cover of the Other Brand Product is used I was rather puzzled by the lack of an instruction manual for color. other (esp. people)
Commercial products for the Large crowd that look like they're bought at the store. Maybe this is what it would be like if it wasn't
Also, even though it claims to be unprocessed, it requires some processing by Rubber's Parts.
The effect itself was there.
But the Sprocket Cover is mindlessly floating a bit …
Whether it's my bad installation or this product's fault, I don't know.
View detail
The KICK itself is great!
Boa Ace products are very reliable! So I bought the KICK I've been wanting to buy for some time now, and this gold-colored part is limited edition! It's a product that's only available now, so I thought it was a very moderate price It's a purchase with a backward push
The installation itself took about 30 minutes to convert - SR's KICK replacement is a web wave (double expression) I have to refer to a lot of books on the subject (e.g., The New York Times, The New York Times, The New York Times, etc.), so I have to refer to those books before I start, so I can make it relatively smooth I did The last thing that troubled me is Circlip was on the web, but there was information that it is better to replace it with a new one I didn't buy it at the same time, so if you order a new one, you'll have to pay for shipping and a refurbishment of the KICK that came with it The dilemma that the I'm going to convince them that it doesn't directly affect their motive power and reuse it (at their own risk)
Well, even I, with my SR 3-dan, can't start at first shot after changing the KICK, something I'm not used to The KICK itself, including the fact that it can't be stepped through to the back of the car & hellip; to be able to start it at the same time as you are used to I wonder if it will be …
If you compare the Plus images, you can see that the OEM has a KICK button on the body of the car It's horizontal, but Boa Ace's KICK is slanted, which is a matter of taste I don't have one → I'll buy one in the future when they come out with a boa ace that makes the KICK level!
View detail
Heat Radiation Fin
It looks very clean and the silver shine matches the SR400! I think the silver shine is also suitable for the SR400!
You'll need a Glasses Wrench, but it's easy to install
(The size of the original Nut and the Nut that came with Heat Radiation Fin are different
It's more of a heat dissipation effect than a cooling effect, but I think it's helping to dissipate heat because it's getting hotter
I don't use the Oil Temperature Meter, so how well it works is a mystery to me I feel that the heat dissipation is better than NORMAL
View detail
It's a must for the '19
Required to install the Bore Ace Change Accent
The price is 1pc. of color, so it's not cheap, but it's a necessary part, so I don't blame you
View detail