Reviews
I want it to be OEMParts.
It seems to be controversial, but the effect is with huddrill.
Shift shaft of SR400 is
The diameter is too thin, the distance from the engine is too long, there is no fixed guide on the Shift Pedal side.
These factors can cause it to creep when changing shifts.
This is the cause of the squishy feeling during Shift change.
This Part is the solution to this shortcoming.
Shouldn't the OEM Sprocket Cover be constructed like this, with the
The structure is so well made that you might even think.
I can recommend it.
View detail
I'm satisfied
I asked a motorcycle shop to install the Bore Ace Rear Sets as I wasn't sure about them. I've been using the Bore Ace Change Accent at the same time and it feels great and the GEAR goes in ScauperScauper.
I've been using it for a few years now, and I'm very happy with it.
View detail
Change Accent。
I used it together with the Boa AceRear Sets, and the GEAR is scauper scauper comfortable! By using the Offset collar, I didn't need to modify the GEAR Cover. View detail
Used by FI Vehicles.
Used to install the Change Accent on FI Vehicles. To be honest, I thought the price was too high, since I also bought the Change AccentBody… View detail
The product is as described.
I wanted to lift the Tank just a little bit because the Fuel Tank and Oil Temperature Sensor interfere with each other, so this is just the right product.
It goes up about 10mm.
Installation is very easy.
The texture of the product is very good, but it is a pity that it is not visible once it is installed.
View detail
Great accuracy Parts.
Wellington is better in appearance, but I decided to think functionally. But it's too big. Functionally it's great, Position is satisfactory and it doesn't slip, but unfortunately after Styling it's a hundred points! View detail
Looks cool.
In the picture, both the Heat Radiation Fin and the first tier have the BORE ACE Logo, but in reality, there is nothing and it looks cheap.
I don't think it absorbs enough heat to feel the effect either.
It seems a bit high in terms of Gold amount.
View detail
BOA aceRear Sets
The best, ScauperScauper enters. I like it. View detail
Don't underestimate Rear suspension adjustment
Safe JAPAN, yet kind price.
I would have been happier if the Grip had a Rubber or something, but it's not a Large Minus as it can be handled by wrapping Tape around it.
View detail
What a tease.
Normal chain adjuster was useless in RustRust, so Material:I chose this one because it is Stainless Steel and seems to be very durable.
It supports normal chain, but in fact, it has an interesting mechanism.
good point
■Material:Because it is Stainless, it is stronger and more durable than NORMAL.
Just replace with Normal chain adjuster.
Chain can be adjusted by the length of the Smallest Chain.
In other words, the characteristic of being →Response-oriented with as little play as possible.
A bad point
None
I thought it was a normal interchangeable product, but it is a karakuri that can always keep the best length and deflection of Chain at that time.
So it always feels good to ride.
Isn't it great that Chain is an Image that you can adjust steadily and match by yourself, but there is no such thing.
So that makes every ride more fun!
View detail
It's also cool to look at
It's easy to replace the Bolt in NORMAL! 。 It's a high-class Bolt.
It is not so noticeable when you see it installed.
Either I made a mistake when I ordered or Quantity:It was 1 Set of 2pcs. so it is Large sturdy with quantity 1 when you order.
View detail
A luxury item
It was easy to install and it took less than 5 minutes. My SR400 is black and I ordered black one.
I installed it and I am satisfied with the casual luxury. I'm glad I bought it and the construction is good.
I think
View detail
I finally got rid of it.
It is a famous story, but SR400 has a lot of vibration. So the license plate is easy to break.
I tried to get him to chew on the washer, but it didn't work... I was skeptical, so I bought this one.
As a result, it was Large sturdy!
good point
The cracks in the License Plate have been eliminated because it ensures vibration reduction.
Design is also good for Parenthesis.
The quality of Boa Ace's Parts is high.
A bad point
I can't find it.
Single engine without Balancer has a lot of vibration, not only license plate cracking but also Nut loosening.
If you can prevent it, let's prevent it (laugh).
View detail
necessities
It seems expensive, but I can't do without it.
I think you should definitely put it on.
View detail
I can feel it!
I think this is a very well thought out engine friendly part. View detail
Not as much as I thought ….
I use it for SR400.
I installed it on my 17 year old SR400 to improve the GEAR intake.
The quality of the product itself is very high (not visible from outside after installation). However, I don't know if this part is so expensive. I think it's because it's not made in large quantity.
I'm not sure if I'm a bad driver or not, but I didn't feel that much of an effect. If you ask me, I think the GEAR is a little better …? I think so.
I'm going to ride it some more to find out.
View detail
The color is different from the information on Webike.
Image ImageQuantity:I bought the 1pc. eye, Fender Eliminator Kit because its color was Anodized.
Page states that the
The Single Item image shows the Special Spec. with no Anodized (Aluminum bare metal) finish.
and I thought that this special Spec. would be coming.
The second and subsequent images were Black, but they were taken from a distance and I thought they were as a mounted Image.
There is no input field to tell the color, and Quantity:I was convinced that the one in the 1pc. image would come.
But the one I received was Black, so I feel cheated by this LandingPage.
View detail
The Instruction Manual was for Rear Sets.
I was able to install it because I was searching for other people's installations, but it would have been nice to have a proper Instruction Manual.
I don't have the impression that it got worse after installation.
View detail
If you're going to install it securely, be prepared.
I bought this because I needed it to install ShiftAssist, and I was able to install it on my 2013 model without any modification.
InstallationInstruction Manual is not included in the package, so I installed it referring to the one I checked on Net.
View detail
It's a little expensive, but I'll take my chances!
I am not accustomed to hear the name of manufacturer, but the construction of the thing itself is careful. My CB-F has been replaced with J's Stem and Swing Arm, and the front fork is CB1000SF 43Φ so OEM Blinker Bracket is not attached. The front fork is a CB1000SF 43Φ so the OEM blinker bracket will not fit. I even contacted one of the manufacturers for a special order, but they simply refused. This is the first time I found this product.:Aluminum, light weight and fits 43ΦFront fork perfectly. However, the quantity:Pair (for Left and Right) It's not easy to align the Blinker. Also, the Blinker interferes with the Horn, so I had to install a spacer on the Horn side to eliminate the interference. Well, I think that this is the only way to customize it. Also, the Gold price seems a little high. View detail