Reviews
Gasket is chitinous, for better or worse.
I bought it because I needed to replace the gasket when I overhauled the Manifold area.
The paper quality is not bad and can be used just like OEM.
good point
● Easier to obtain than OEM.
Durability is also sufficient.
Inexpensive and easy to stock.
I recommend Stock for those who do their own maintenance.
View detail
Almost satisfied
The installation was sent directly to the store that requested the work and had it installed.
When I KICKed the pedal after installation, it was fine until I folded the foot pedal, but when I started to ride, I realized I had not put the pedal back on and panicked ^^;
The space between the pedals on the shift side is too short for me, and I sometimes get stuck when changing gears if I wear engineer boots that have a plate on the toe.
With a swallow handle, the position is naturally in a knee grip posture.
The texture is good and looks good.
I have no complaints about the effectiveness of the Brake.
The familiarity with NORMAL to Rear Sets was confusing only at first, but I quickly got used to it.
View detail
YouTube from the instruction manual
The installation was quick and easy, as I had studied the installation beforehand on YouTube etc.
The way GEAR is entered is also much better than NORMAL.
I wonder if the separate color is $1,000 too expensive.
View detail
I've been removing Seat more and more often.
I have the Body of the Dora Recorder under the Seat, and I often replace and remove the microSDCard for Touring recorded images.
With the OEM Bolt, I had to pull out the Wrench every time, but with this, I can access under the Seat with a single pc of the small Hexagonal Wrench. It also saved me a lot of time.
It looks a little better, too, don't you think?
View detail
I can see the difference.
I recently installed it as a DIY project.
2017 RH-03J.
I used to have a lot of difficulty entering GEAR, but after installing this, I can enter ScauperScauper.
This may seem expensive at about 5,000 yen, but I think it is more than the price.
View detail
Do not enter Neutral in the middle of an intersection.
When shifting from 1st to 2nd gear while entering an intersection after starting off, the car sometimes goes into neutral and fumbles.
I introduced it to see if I could solve that.
I've only driven about 300 km, but I don't get upset anymore.
Worth introducing.
View detail
I'm glad I put it on. (^o^)
In the past, especially when driving at low speeds before a traffic light or in traffic jams, there were often times when there was a snag in Shift change and the car would not go into Smooth. However, after installing Change Accent, Refreshing and Shift can now enter.
I should have put it on sooner.
View detail
This is a Recommendation
RH01J.
You don't have to be a hardcore fan to feel the effects of these parts. It was just as other reviewers said.
Even an amateur like myself could feel the mild feeling of embellishment, acceleration, and above all, the reduced burden on the engine, all by feel, as soon as it was installed.
Even without knowledge or experience, the replacement of these parts is easy enough to understand and install.
I think it will be very effective for my car, which I wanted to ride on a large cutter since I commute 25 km one way.
View detail
A mere Spacer is a Spacer.
[How is it used?
I had time to install the Boa Ace Spacer, which had been long overdue since it arrived.
Was the one you received as per Image?
Of course! I have purchased Boa Ace products many times in the past and I have confidence in them! This product also shows the beauty of polishing etc.
How was your experience with it?
There are no particular defects. I feel very self-satisfied because only the rider can understand this part, but…
[Points to note]
If I had to say something, I would say that Torque management is a Large cut, but we are hand Torque (appropriate), so what the … (laugh).
How did it compare to other products?
I'd like to think it's not like the extra Nut in the toolbox etc. or the proper Spacer (I hope).
Other items that would be helpful
I need a 20mm Wrench to remove the bolt on the Tandem Footpeg side and replace it.
View detail
Quintessential Boa Ace product.
The installation method was based on YouTube. It was quite difficult, but I managed to install it.
It looks great.
I honestly did not understand the effect as much as I felt it.
I am sure there must be some structural effect.
View detail
Hidden Dress-up
It is an inconspicuous component, but it is a hidden dress-up. You can show it off to your friends. View detail
SR became healthier?
When I first saw it, I wondered how this would work. I thought, "But high turnover (4000) Acceleration from above has been extended.
When the acceleration from 100 km/h to 130 km/h is in NORMAL, if I turn it any further, won't it break? The feeling of "I'm not sure I can do this" is lessened.
Also, the sound of the Exhaust System used to be a bit jumpy, which I didn't like, but now it has a mild bass sound, which is also a secondary effect of the BigLife. (Favorite sound)
View detail
It's so good, but...
Very nice, but I had a hard time installing it.
Officially, it was stated that it was just a matter of loosening the Chain.
It was more difficult than I thought it would be because of other interfering components.
If you are not good at tinkering with machines, we recommend that you hire a contractor.
However, it was worth the effort to install it and I am Large satisfied with the performance quality.
View detail
I'll never break my iPhone Camera again!
I broke my iPhone Camera.
I had to change the model, so I decided to take measures to prevent it from breaking again.
As expected of Boa Ace, Quality is perfect.
I bought another pc. and also use it with CT110 HUNTER CUB.
View detail
Finally...
When I installed Bore Ace's Rear Sets, a part of the FootBrake interfered with the Exhaust Guard.
It was described as if it was Large sturdy without it.
It will probably interfere with all Exhaust Guard!
View detail
Anti-Vibration Bracket
cool
It's good for preventing Number from cracking.
View detail
Making flowing stones
Every time I think about it, I can put the Boa Ace product on without worrying about anything.
I've been told that the products are expensive, but I can't help it because they are of such high quality and safety.
For purchase to fix Breather filter.
I don't know how effective it is.
View detail
It's a little pricey.
I purchased this product for my Change Accent installation.
For FI Vehicles, you will need this, but I think it is a bit pricey.
Since the parts are not visible from the outside, I don't think it's necessary to be so concerned about the finish.
It seems to be the place where the strange obsession of the area seems to be the product of Boa Ace.
View detail
This is for the Sepahan (sr400. 2019)
Quality is very good! Installation will be difficult for a layman for Large. If you have a motorcycle shop near you, it's best to have them install it. I installed it myself, but when you remove the OEM footpeg, you need to use Pliers and Parts cleaner. As for the brake side, since the OEM exhaust system is installed, it interferes with the exhaust guard, so I plan to install the bore Ace collar. View detail
Frankly
I bought these because they interfere with the exhaust guard after replacing the bore AceRear Sets. The rear brake is very good. The quality was good as always. View detail