Reviews
KITACOSilencer spring
I bought this in a hurry because the Spring that came in the kit was a Hook length that needed to be more than double that length.
It was fitting as if it was in the very Kit.
If I had wanted, it would have been perfect if it had an anti-vibration rubber.
If it breaks, I will buy it again.
View detail
Stainless Steel Spring
I bought it last time and installed it, but on this touring one of the Springs was missing. I've been pulling on it a lot, so I can't imagine it coming off, so did it break? I hope it will not go missing this time. View detail
Perfect for Repair
The Exhaust Spring for Repair is Reasonable and of good quality. The spring is strong enough to hold the muffler pipe together. It is high quality and safe to use. View detail
Is the Anti-Vibration Rubber too short?
[How is it used?
I had to replace the Spring at the exhaust pipe connection because it corroded heavily after stepping on a salt cull last winter.
The last time I replaced it was in June 2017. I was still concerned about corrosion so I replaced it.
So far, I've been using the bare Spring, but this time I'm trying the Spring with Anti-Vibration Rubber.
I sprayed it with AZ's quick drying silicone spray to make it easier to cover the rubber and to prevent rust.
Assembly part 4pcs, Center pipe and Exhaust System part Quantity:I need 2pc, Exhaust System part Quantity:The 2pc was not workable and was abandoned.
The first step is to replace the four assembly parts.
How was your experience with it?
I think it's good that I no longer hear the Spring sound when I hit something with Maintenance.
How did it compare to other products?
I don't know the products of other companies. I am sorry.
[Points to note]
LargeIn the past, I was able to detach it by pinching it with a radio pen, but it is still convenient to have a tool. I use a hook type pick tool.
I think the Anti-Vibration Rubber is too short, it's a Rubber hose so I should buy it separately and fit it to the right length.
Other items that would be helpful
Presence of Included Parts:/・・・3Quantity:I've purchased a Set, of which Quantity:1 Set comes with 1 pc of Anti-Vibration Rubber as an extra.
View detail
diversion
I see 30mm and 50mm but no 40mm for sale.
It is not for motorcycle use and I found 40mm but the hook part was cut early.
View detail
Exhaust System Fixing
It is purchased for fixing Exhaust System.
Quantities with Anti-vibration Rubber Tube:I thought the Set was better, but I am concerned that it seems slightly shorter in length when installed.
View detail
Very good quality.
The stainless steel material is very strong and resistant to rust, so it will stay clean forever. View detail
Firm Spring force.
The spring is very firm and connects the joints of the exhaust pipe, it is convenient to use for repair and the price is cheap and the quality is good. View detail
To prevent squeaking
I was looking for a replacement for the exhaust spring because of the rattling noise and this product came to my attention.:1 Set of 10pcs. is enough for you to stock if you have extra. The heat resistant rubber will reduce the vibration and rusting sound. View detail
for Replacement
This is a purchase for replacement of ChamberFlange part.
Quantity:1 Set of 2pcs. for a great deal?
The cut of the Rubber tube was beautiful on this purchase as well.
What was the slant and bad look the first time, when I bought it…
View detail
for Replacement
This is a purchase for Replacement.
I was wondering if it would be more economical to purchase the Spring and Anti-Vibration Lara Bar set. This time, the cut end of the rubber is straight, and I wonder if the previous purchase was strange.
View detail
Highly recommended for Long Type!
[How is it used?
By changing the Silencer OnlyMegaphone of NojimaFull Exhaust System on XJR1300C.
Used for the joint of Silencer and Exhaust pipe.
How was your experience with it?
With the SiliconCover, it's 100mm normally, and probably 110mm when extended, no problem.
I'm pulling quite a bit, but so far it's working fine.
How did it compare to other products?
Anyway, I chose this long Spring with SiliconCover for cosmetic reasons.
One Side is a type that can move its neck freely, and it is a guy who can correspond to the type that the angle of Spring hook is attached.
[Points to note]
Be careful not to pull too hard! It will fly off while you're driving.
View detail
I lost it while driving, so to Repair!
[How is it used?
I'm using Nojima's FASARM PRO TITAN V/CAT TYPE-SC on my XJR1300C.
Only the Silencer was changed to Megaphone. The Silencer and the Exhaust pipeJoint part.
Spring is gone before you know it.
How was your experience with it?
NojimaRepair, so the length and thickness are exactly the same, no problem.
How did it compare to other products?
I think other companies are fine, but I wanted to have a manufacturer, so I bought a new Repair.
I think it's too expensive for just Spring, though.
[Points to note]
If you pull it too far, it will go bye-bye while you are driving, so if it is not long enough, use Other Brand Product.
View detail
Good. ♪
Stainless Steel, no resonance and cheap.
No complaints at all.
View detail
Stainless Steel Spring
I bought this because I installed a different silencer this time and the spring length doesn't match. I'm happy with the Large variant because it's cheap and good quality. View detail
This is the product I was looking for.
I changed my Silencer and bought a Spring to go with it.
It's a simple Spring, but it's necessary and sufficient.
I bought two 50mm and two 55mm to fit to the car body more.
If you change your Silencer frequently, you may want to have a few Size.
View detail
I bought it because the Spring that came with the Chamber flew away.
The Spring to prevent the Silencer from falling off that came with the Chamber flew off, so I bought a Spring with Anti-Vibration with Rubber.
When I put the Rubber on the Spring, it was a little Large strange because it was quite tight.
So far, I'm happy to say that they've stayed on without coming off properly.
View detail
The one that came with it just flew away, so...
The spring that came with the Chamber when I bought it flew off during touring, so I decided to use the one with Anti-Vibration Rubber.
It seems to be Large sturdy so far.
View detail
No problem
There is no problem in the function. If I had to say, I would say that the whitish plating like Uniqlo doesn't blend well with the burnt color of the exhaust system. View detail
Generally good.
Purchased to adjust shipping costs.
The original Spring is badly rusted and I want to revive its appearance.
MORIWAKIOEM, so you do not have to worry about the length.
After the exchange, I am self satisfied.
View detail