Reviews
cheap
Hammer is easy to use.
The Grip has a gelled surface to prevent slipping and make it easy to hold.
The RubberPlastic hammer can be used effectively in places that cannot be hit hard with the Gold Hammer.
This is also good because the Head can be easily replaced if damaged.
View detail
Really long!
This is a good tool to reach areas where you need a gripping screwdriver. The tip is serrated and holds screws well. Recomended. View detail
The best JIS screwdrivers
Ive bought a few different JIS screwdrivers over the years and these are some of the best. The Impacta device works well and the tips are well made and withstand the use. Great grips as well. My go to brand for screwdrivers for Japanese motorbike screws. View detail
Convenient
The band that holds the 4-cylinder Throttle body in place is quite deep, so an ordinary driver cannot reach it. This product is inexpensive, yet accurate and easy to use because it is hard to lick the Screw. I bought other sizes because of its low price. View detail
I was able to use it conveniently with my 4mini below the waist Custom.
The Screw which fixes the StatorBase of your beloved car DAX is Size3 in Plus.
I think it is impossible for a normal Driver to loosen this one.
This time, I was able to remove it safely by using this product and Hammer which I bought separately.
Size3 is one sizeLarger than the regular Plus screw.
I don't think you can have an Exactly Driver very often.
If it is this product, it can be used as a normal driver if it is not beaten with Hammer.
I think it is a convenient product that has no loss to have 1 pc because it can be used.
View detail
A definite classic.
The cross section of the shaft is round because it is not designed for rough work, and therefore it slides and turns very well even if it is supported by hand.
This ball-shaped grip is easy to turn quickly and is a definite tool for light, twirling work.
Personally, I would recommend the ANEX electrician's tool if you want to do everything in one tool, even a little rough work.
ANEX shaft (Hexagonal cross section) It can be used to turn the tool on and off, which is helpful when you have a tougher screw than the ShockDriver.
Both of them are performance as a driver. (Bite, durability, etc.) is sufficient.
The VetuCell is the Grip shape that many people prefer, so many people will prefer this one.
I think it's better to use the one you like when you actually touch it.
View detail
This is the only way to do it.
I bought this exclusively for removing the carburetorIndicator from my 4 shot Engine.
There is a hole in the Aluminum Frame for the Driver, and with a fairly long Shank Driver, you can loosen the screw in the Insulator band.
In reality, the 450mm Shank is a little too long, but it gave us plenty of room to work with.
The grip is long enough to fit the overall length of the machine, so you can turn it with both hands without worrying about turning it with a lot of force.
The tip of the tool is a little bit special shape, which is long in one direction of Plus groove, but it can turn a normal Plus screw without anxiety. As the name suggests, Shank is a square shaft, so you can put the tool on it and turn it if you want to.
View detail
It can be used for a long time.
I've been using it for almost 30 years since I bought it, but the sharpness hasn't changed. It is a necessity for playing with electric equipment. If you buy a good tool from the beginning, you can use it for a long time. View detail
Standard Driver
The VesselBrand is the best choice for the amateur and veteran. I always use VesselBrand because it is a product that I am sure to choose, and I can use it safely for a long time because it is excellent in durability. View detail
Ideal for working in tight spaces.
The size is very compact, but the construction is solid and durable, so Torque can be applied without any problems. It is a product that is easy to use even in the place where it is easy to use it for the work only with the fingertip in a narrow place and the angle is not effective without a problem. View detail
Easy to hold Grip
The RubberPlastic hammer can be used effectively on the cylinder head and aluminum oil pan where it cannot be hit hard. View detail
I love the color.
Tool Manufacturer is buying without limitation.
I bought one that I liked at the time, but this time I bought it because I liked the color.
Tools are not consumable, so we buy some expensive ones.
View detail
Cospa!
Cospa! Great!
We are second to none with other overseas manufacturers.
If you're not particularly particular about it, it's good enough for Sunday mechanic.
View detail
watchman
It's a classic Prahan. I have no complaints about this product. If it's not so good, the head may wobble over time, but this is not the case at all. In addition, the life of the head has not come yet after more than 20 years of use for me of PrivateYouth. By the way, if you are not used to it, you should not use the Head as a Gold genus - a plastic combination. People make mistakes, so if you have to hit it with plastic, you will cry if you hit it with the Gold genus (copper is still good, but iron...) It makes me cry when I hit it with View detail
Driver is sufficient for the Mega-Dora.
It's a perfect product. There are many more high end products than this, but the Mega Dora is more than enough. On the other hand, there are many cheaper ones that are a bit less expensive than this one, because they are more expensive for Professional use. , I think Mega Dora is in just the right place. View detail
Wiring essentials
Code Peeling Tool
If you lightly grip it, the cord is clamped, and if you grip it all the way to the end, the cord is stripped off
You need to have a certain amount of wiring length to pull the peeling type by hand But because this can be peeled off if there is a cord of about 3cm, it comes in handy for short wiring etc It is
However, if you use the wrong wiring size, you'll end up cutting the inside of the stranded wire Caution
It's a reliable and well-established manufacturer and I've been using it for a long time
View detail
For a rusty Screw or a crushed head of Screw
I use it with my Restore in a long term abandoned car It is useful for removing Plus and Minus screws that are hard to use force to The screw that the head is crushed can be removed by the luter to fit the slotted screwdriver After grinding, use the Impact to remove it You can hang it up so you can make fewer mistakes I have been using it for nearly 20 years Bit has become useless soon View detail
VESSEL Precision Hex Screwdriver Set TD-58 with 6-sizes
This review is for the VESSEL Precision Hex Screwdriver Set TD-58 with 6-sizes. This is my second Vessel precision driver set from their TD line, and I must say that I’m very pleased. The case that holds the individual drivers is great and it can even be hung if desired. Each driver has a sturdy feel and the metal used on the tip feels as though it won’t ever strip. Overall im very happy with the Vessel brand. View detail
VESSEL Three Point Phillips Screwdriver TD250Y
This review is for the VESSEL Three Point Phillips Screwdriver TD250Y. I was pleasantly surprised by the seemingly high quality of this screwdriver. I’ve never owned a Vessel brand tool and I was expecting to receive something of marginal quality, I was wrong. Each of the three ends has a different size Phillips driver. I expected to be able to remove and replace the bits as I needed, but sadly they are fixed. Great tool! View detail
Step is kept with the Hex bit of an acknowledged Vessel, entering a tip Magnet, and 2.5-3-4-5-6 in the Driver or the Bit.Although there is no turn in Motorcycle maintenance, when constructing and acting as Balazs of a 19-inch rack or the furnitur
Step is kept with the Hex bit of an acknowledged Vessel, entering a tip Magnet, and 2.5-3-4-5-6 in the Driver or the Bit.Although there is no turn in
Motorcycle maintenance, when constructing and acting as Balazs of a 19-inch rack or the furniture, the electric driver is using.a Series -- an overall length -- the same -- since there is no Torsion part -- a rigid feeling -- high -- a total Size -- it can use with the same feeling.The using feeling in the electric driver of a constant Torque is better than an Impact.Although the
Plating is also embezzled considerably beautifully, it does not wear out, and it is very convenient for the Cap bolt of a Steel to enter a tip Magnet.
View detail