Reviews
Fits: HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D, HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D
Beautiful
It looks beautiful and was installed with no problems.
I like the texture of this product.
View detail
Beautiful
I installed it on Axle Shaft.
I like the look of it, it's beautiful.
View detail
I got the wrong size.
Check the Size carefully!
Texture is anodized, clean
If possible, it would be easier to use if the Hose spacing was a little narrower.
View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100, HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100
no problem
The outer diameter is a little smaller than Active etc., but there is no problem. View detail
Anti-slip?
Since there are 6 clutches, the force is applied to the Clutch lifter evenly etc.
When using OEMPlate. The slippage became a little better.
View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D, HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D
APE 100
Used for APE 100
Embedded in Front forkCustom
It is said that just by installing it, Spring will shrink a little without Coin.
It's the Initial Adjuster of the APEXR system.
I think it's good that there are several colors.
View detail
Fits: HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey, HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey
It doesn't have to be double nut.
Speaking of Stud bolt replacement, Double nut is difficult until you get the hang of it (or is it just me?).
This is nice and easy because you can go round and round with Hex.
I like that the price is not so high.
View detail
Fits: HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D, HONDA NSF100, HONDA NSR Mini, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D
Dress-up from Axle Protection
Since it doesn't have a slider, it's more for dress-up.
There are no parts for CBX, so this kind of UniversalParts is very helpful.
I'm going to upgrade by changing these small parts.
View detail
Fits: HONDA APE100, HONDA APE100 D, HONDA NSF100, HONDA XR100 Motard, HONDA APE100, HONDA APE100 D, HONDA NSF100, HONDA XR100 Motard
makes your bike go!!!
This is one the BEST kits I have ever installed on my motorcycle. It keeps a good balance throughout the powerband and has been very reliable. View detail
Fits: HONDA NSF100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 100, HONDA APE 50
extend camshaft life
This upgrade will ensure you camshaft will last longer by keeping the camshaft fully lubricated. It also allows running a camshaft with higher lobes without clearance issues. View detail
It wasn't 10W, it was 23W.
Absolutely says 10W, but I looked at the balls and they are 23W.
Quantity for Front, for Rear:I bought 2 Sets and all 4 were 23W.
I changed to OEM 10W balls, but one didn't stick and it was an Earth defect.
View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
I guess the Parts are more for looks than function...
Driven Sprocket more firmly than the OEM steel plate punched out Parts.
I bought it to see if it would Hold, but I thought it wouldn't make much of a difference.
Sprocket's hold method itself remains the same, so it's no surprise.
I'm sorry to hear that, but I've Upgraded the look quite a bit.
But I can't see it when I put Generator Cover. This was also disappointing.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA Benly CD90, HONDA Super Cub 90, HONDA monkey, HONDA Monkey R, HONDA Monkey RT, HONDA monkey, HONDA Monkey R, HONDA Monkey RT
It's a lot of work to install, but no one will ever know it's there...
Remove the Flywheel, Coil and OEMStatorBase and install the product.
It is a very time-consuming custom to install Coil, Flywheel and
At the end of the day, when you install the Fly Wheel cover, it's an unassuming product that no one will know you're wearing.
It's a Parenthesis-like Part that looks great, but is completely invisible behind the scenes.
But the payoff was worth the effort.
In my case, I run the engine and start running slowly after warm-up.
I could feel the smoothness of the Engine as it warmed up to some degree.
The vibration at the time of Idling is also clearly Small.
I think it has a good effect on the driving performance, so I'm not sure how effective it is.
I'll update the diary again.
View detail
Fits: HONDA Ape 100 Type D, HONDA Ape Type D, HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR Mini, HONDA NSF100, HONDA Ape 100 Type D, HONDA Ape Type D, HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR Mini, HONDA NSF100
I can protect it!
It seems to protect the Axle Shaft well.
It is also well made, and there is a sense of luxury there.
I recommend it!
View detail
Fits: HONDA XR100, HONDA NSF100, HONDA APE100, HONDA XR100, HONDA NSF100, HONDA APE100
APE 100
Used for APE 100
Anodized aluminum color is available for the old model.
New products are only available in DuraluminBlack
The color is more than Matte, and if anything, it is like Plastic.
At best, there is a sense of simple luxury that is Race ish!
When using the APEXR100
Front removes Washer
Rear uses the OEM Washer between the Swing Arm and the Slider
The reason is that there are some car bodies that rattle without Washer.
When using the Washer, it is said that the thin Nut attached to the Washer is used even if there is a Nut edge.
This is Manufacturer Inquiry
View detail
Fits: HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR50, HONDA NSF100, HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR50, HONDA NSF100
It's not rigid enough.
If you are breaking from the straight end of the circuit, and if you are leaning even a little bit at the entry, the caliper support will creep and you will die from the strong large vibration.
I don't think you'll feel any negatives if you don't have a short cart course in the low 20's or a large speed in town driving.
… Or maybe it's wrong to put Brembo caliper on NSR50 or NSF100 in the first place.
It's my fault that I bought a brembo for my moped Base, not the product.
View detail
Cooler looking handle bars for the Monkey 125
Now that I have fitted the Shift Up handle bars designed for the Honda Monkey 125 I can report back with the pros and cons. Only one con really and that is the the pre drilled holes for the switch blocks are not quite right causing the switch blocks to sit a little low making operating the indicator button in particualr a bit difficult while riding. I will have to re drill the handle bars and re position the switch blocks in the future. Pros I love the way the handle bars now make the bike look more mini bike. I ergonomics of the handle bars are well suited to me and give the Monkey a more aggressive feel then the OEM handle bar crusing feel. View detail
Parenthesis good
Seats are now easier to take on and off. It looks great. View detail
Fits: HONDA Ape 100 Type D, HONDA Ape Type D, HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR Mini, HONDA NSF100, HONDA Ape 100 Type D, HONDA Ape Type D, HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR Mini, HONDA NSF100
Just in case.
I installed it just in case.
I don't know how well it works, but it does seem to be strong enough!
It is also recommended for Dress-up.
View detail
สินค้าคุณภาพดีและการขนส่งรวดเร็ว View detail