Reviews
Magical racing indeed!
Installation was easy, as it was designed specifically for the car model.
(Chain Cover behind Left has been cut a little)
But is it a Normal muffler assumption?
My CB400SB has an external Full Exhaust System, but there is almost no gap between the bottom of the exhaust system and the bottom of the cowl. (Postcard does not go through) AluminumHeat Seat was applied for heat protection.
When I installed it, Parenthesis improved so much that I don't care about that, and I am really Large satisfied.
View detail
Magical racing indeed!
Magical racing indeed!
The part that enters the view is smaller than the products of other manufacturers, but it is made in consideration of the bank angle, and because it is manufactured for each car model, it can be installed avoiding STAND, although it is still in the temporary fixing stage.
One disappointment is that it is based on Normal muffler?
My CB400SB has an external Corresponding Exhaust, but the bottom exhaust pipe assembly is in contact with the bottom of the Under Cowl.
I'm going to put a heat-resistant aluminum sheet on it for the time being, but if that doesn't work, I'll have to cut the parts that are in contact with the Exhaust System. I just pray that the heat-resistant aluminum sheet will fix the problem.
Other than that, I am satisfied with the level, so I would like to enjoy my motorcycle life with CB400SB which has improved parenthesis by wearing Under Cowl.
View detail
Moderate presence
I wanted to create a sense of unity with Radiator because it felt like it was attached to me.
There is no particular problem with Fitting.
It has been about 4 years since it was installed. [Color] There is no particular sense of deterioration of the Clear layer.
It is difficult to open and close the Radiator Cap, although this happens infrequently.
The OEM has a slit that I believe leads to the air cleaner intake under the tank, but this one has no opening.
Unlike Full Cowl, there was no duct or rectification in the pathway, so it may not affect it that much, but I am a little concerned.
Another minus point is that the fiber density may be a little rough, and it looks translucent when exposed to direct sunlight.
Radiator has been changed to a Large type since the 21 model year, so care must be taken to ensure compatibility.
View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA MT03
Thinner than I expected.
I bought it from Circuit Running.
I also have AGRASEngine Guard installed, but I bought it just in case.
Is it because of Twill Weave Carbon? I am somewhat worried because it is much thinner than Image. Regulation Torque (10N.m) The Coat on the surface was lightly damaged just by tightening it with the "Tighten" button.... I think it's not a problem if it can be guarded properly when it falls down.
View detail
Magical racing twill weave Carbon Mirrors NK-5
The price is not inexpensive. The quality of the product is satisfactory, as it is carefully crafted in every detail with genuine CarbonMaterial.
The wide field of view with Blue convex Lens is also easy to see, and the functionality as a Mirror is outstanding. The adjustment mechanism of each part is also well thought out, and it can be said that this product is well worth the price.
View detail
Just fit with Exclusive Design
Exclusive Design indeed!
Just fit and installation is a snap with the included double-sided tape.
However, as you can see in the photo, the color of the body color Black is different, but I think this may be due to the lot number of my Motorcycle.
View detail
Magical racingFI Kaoru
Twill weave, Injection cover. happy with the look. remove NORMAL and pimp it. View detail
yzf R1 15 magical Racing Carbon rear fender
[How is it used?
I purchased this product as an exterior Custom.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
I think any beginner can install it.
How was your experience with it?
Although heavier than OEM, it is definitely stronger and looks better.
[Included Parts:were they on?
Sticker is LargeSmallQuantity:It contained 1 pc. each.
[Was there anything that disappointed you?
When the Swing Arm and Fender were installed, they were not completely accurate, and there were some parts that floated a little.
View detail
Parenthesis?
I really wanted the twill weave, but it was out of stock and I didn't know when it would be back in stock, so I decided to go with plain weave, but when I saw the product that arrived, I thought Parenthesis was good.
The Tie Wrap is used to secure it in 4 places for installation, but that is not a good point.
View detail
Parenthesis is better now.
I installed the Under Cowl to prevent OIL from dripping on the circuit, but I installed the Parenthesis because I like the Parenthesis. I think the OEM Exhaust System is easy to install (the sensor mounting screws on the side stand are coated with anti-loosen agent, so be careful not to lick them). (The sensor mounting screws on the side stand are coated with a non-loosening agent, so be careful not to lick them.) View detail
It was more hade than I expected.
Ponting with Double-sided Tape (pre-pasted on the inside of the Body).
The actual product was more flashy and closer to silver than what I saw in the picture. 。 It didn't feel right at first.
This might be good once you get used to it. 。 I have come to think that this is a good idea.
We also used ELMeter for the meter, so the area around the PadMeter was glossy.
View detail
Self-satisfaction + hope for effect...
[How is it used? City Riding - Touring - Circuit - Mountain Pass
Was the one you received as per Image? A beautiful piece of work.
Was the installation difficult? Crimp only with Double-sided Tape
How was your experience with it? Since I have the Rear Sets installed, the Footpeg is higher than the OEM, so the air enters and exits from the right position, so I think it was effective....
[Included Parts:were they on? None
[Was there anything that disappointed you? None
Other items that would be helpful
Point and hang of installation OEM footpeg can be attached to the footpeg! But, it is designed to release air, so there is a risk of hot air hitting your feet. 。 If Rear Sets are included, might they have to be removed and installed?
View detail
Self-satisfied...
[How is it used? City Riding - Touring - Circuit - Mountain Pass
Was the one you received as per Image? Very beautiful piece.
Was the installation difficult? Pimp it!
How was your experience with it? Not at a Level where the effect can be felt, in general, self-satisfiedParts
[Included Parts:were they on? With AdapterParts for installation
[Was there anything that disappointed you? None
Other items that would be helpful
[Opinions and requests to Manufacturer Could you do it a little cheaper! I gave it 4 stars because it's way too expensive!
View detail
Self-sufficiency..., (2)
[How is it used? City Riding - Touring - Circuit - Mountain Pass
Was the one you received as per Image? Very beautiful piece, too expensive to give it 4 stars!
Was the installation difficult? Just crimp the top with double-sided tape...
How was your experience with it? Weight reduction? Not ... only self-satisfaction!
[Included Parts:were they on? Included Parts:None
[Was there anything that disappointed you? I thought it was OEM removal and installation!
Other items that would be helpful
[Opinions and requests to Manufacturer Meter cover, so can you lower the price a bit?
View detail
I think it's very satisfying because it's the part you see when you get on the train.
Remove the OEMInner panel and foundation, attach the included FRPBracket and install this product - a 10 minute job.
However, the OEM has a push rivet and pawl on the side of the meter to hold it in place, but this product does not have a fixation in that area, so it flexes when force is applied from the front side….
I guess it is not something to worry about in the normal use range, but I was concerned about it, so I put the FRP Bracket on while leaving the OEM base, and then I put the FRP Bracket on the top of the bracket and fit it in.
View detail
Installed on New Model GSX1300R HAYABUSA
[How is it used?
Installed on a New Model GSX1300R HAYABUSA to enjoy the Winding.
Was the one you received as per Image?
The Twill Carbon weave is very beautiful.
Was the installation difficult?
It is very easy to stick with double-sided tape.
How was your experience with it?
Even just not touching the Frame directly was quite effective.
Cooling performance also seems to have improved, perhaps thanks to the product's unique Air Intake feature.
[Included Parts:were they on?
Included Parts:Not available.
[Was there anything that disappointed you?
None
View detail
Fits: KAWASAKI ZX4R SE, KAWASAKI ZX4R, KAWASAKI ZX4RR, KAWASAKI ZX25R
It's a very expensive item, don't make me process it...
Bolt holes did not fit, so they were machined.
It's a little disappointing because it's an expensive purchase.
View detail
Carbon Side Cover is attached to New Model GSX1300R HAYABUSA.
The OEM side cover had a GizaGiza pattern that I personally didn't like, so I purchased a twill weave Carbon Side Cover from Magical racing.
My personal impression is Merit? If properly aligned, it will adhere well and cleanly.
As for the Demerit? The OEM frame has no screws, claws, etc., so it is not as strong as the OEM frame. The heat from the frame is transferred immediately and the thighs are hell. (It may be heaven in winter).
? The instruction manual is a bit of a mess. The instruction manual is a bit confusing.
I know there are individual differences, but in my case, I happened to have Impact, Double-sided Tape, and Silicon-off etc. tools, so I was able to install them by myself.
Bracket partially modified ? Side cowl is removed for chipping.
If you don't have such tools, I think you can throw them to Motorcycle shop.
I think the product itself is very beautiful and good, if a little dry.
View detail
Best for DOING
It came in surprisingly quickly.
Originally, it was a MODEL with few custom parts, and Screen had two choices:Puig, which was attached before, and this one. (There are others, but they are Parenthesis bad.)
As expected of a Magical product, the texture is perfect.
It also looks more fearless, standing lower than any other product.
The holes were slightly misaligned, so they were carefully tightened.
If I wanted, it would be 100% if it were a little shorter since I don't have a windshield effect on the plane anyway.
View detail
Yoshimura cyclone volume and Under Cowl are now good.
Yoshimura cyclonesq and Exhaust System catalysts (Lunch box) I was concerned about the balance with the lunch box, and thought it might be resolved by adding the Under Cowl. I thought it might be solved by adding Under Cowl. At first, I used Carbon (Plain weave) Next (twill) I had ordered FRPBlack, but the delivery date for both had been extended and I had cancelled the order, but suddenly FRPBlack showed up in stock, so I ordered it without hesitation.
It took some time to paint with BlackMetallic, but installation was very easy.
As you can see in the photo, the balance of the entire system, including the exhaust system, has been improved and I am satisfied.
Also, even if it is not Carbon, I am satisfied with the texture if it is painted.
View detail