Reviews
Installed on the previous season Grom
It is easier to see than the OEM round mirror, but when I wash the car, grease leaks from the gap between the mirror and the body.
If you don't care about it, it's fine, but if you're like me and want to coate, leaking Grease is a big deal.
View detail
long (distance)
I have a HURRICANE Handlebar Kit, but I wanted to make the Handlebar a little more Up&Back, so I changed the Handlebar Post and made it 5mm Up&Back. It is only 5mm up and back, but when I cut the Handlebar, even if I adjust the Choke Wire to the largest size, the Wire is pulled and the Engine RPM goes up. Choke Wire is good feeling with OEM installation, but Clutch feels very long. Clutch wire is very long. 5mm up&back, Axel&Clutch wire does not need to be replaced. choke wire play adjustment bracket is easy to adjust unlike OEM. View detail
ordinary for now
It's a normal Bracket, nothing special.
It's well made, but it feels expensive.
Well, it won't break, so it's OK.
View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CB300R, HONDA CB150R
I am satisfied
The OEM Handlebar had a tendency to spread the arms, but this Handlebar is large and strong without spreading them too much. I am satisfied with it. View detail
Long clutch cable
As for the GSX750s, it seems to be a little lighter than the STD Shape because it has a wider range of handling changes.
However, STD Shape's product has a tube that suppresses the movement of Wire near Lever, but this product doesn't have it, so you may feel the movement of Wire when you move Handlebar, and it may not be bothered by the pull of Lever. The difference of the feeling was heard.
View detail
HURRICANEFender Eliminator Kit&DAYTONALicense Plate
It was easy to install without any difficulty. The only thing is that the wiring of the License Plate Light is passed through the hole of the Plate, and although the wiring is protected, it is damaged by the corner immediately. I wrapped Tape around the Wiring and protected it, but I thought that I could be relieved if there was a Rubber Rubber in the hole which passes the Wiring. If you are considering purchasing this product, I think you should prepare something to protect the wiring.
I was satisfied with the shape as I expected.
I chose the one with Reflector by DAYTONA for the License Plate, but I had a sense of security because the Reflector had become a screw stopper.
View detail
Fits: YAMAHA TW200E, YAMAHA TW200, Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI RV200 VANVAN, KAWASAKI ZEPHYR1100 RS, KAWASAKI BALIUS2, KAWASAKI ZEPHYR1100, KAWASAKI W400, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI 250TR, HONDA MONKEY, HONDA MONKEY, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA VTR250
The texture is good
It is easier to work with CenterMark for positioning and Memory for angle adjustment, but
I was able to work with BrandSeal as a landmark.
View detail
Along with the Handlebar replacement.
The size is Exactly the same as the original one. View detail
Helmet holder for convenience.
It is easy to install, but it becomes a little loose after a long time even if you use the attached Rubber depending on the place. As a countermeasure, after degreasing the mounting part, I put Double-sided Tape on the Both Sides of the Rubber. Plating is beautiful, but it would have been even better if there was Black because I wanted to put it in a place where it is not noticeable. View detail
To the easy positive …
It is recommended for those who want a little more easy position for city driving and touring. After installation, it is easy to ride with easy position. However, I think the OEM position was more comfortable on the fun mountain road. I think I will change back to NORMAL if I feel any discomfort. It is easy to drive in the city because the upper body is up and the field of vision is wide. View detail
Improved loadability and maneuverability
We wanted to improve the loadability and handling, so we looked for a Rear Carrier and chose the HURRICANE one based on the shape of the steps with the Rear Sets and its reputation for strength. View detail
It's okay
Position is now easier
It took me a while to install it, but I managed to do it.
The weld spatter at the bottom of the weld was painted without finishing it.
It looks very bad in that area.
Whenever you have time, you can scrape off the sputtering morsels.
I'm thinking of repainting it.
View detail
Fits: HONDA glom, HONDA glom
Pre-drilled holes for pumping
Pre-drilled holes for pumping
And for all the Machines we've seen so far.
Go ahead and use the black paint.
I'm feeling a little weak.
I chose Black again this time.
Handlebar position has been changed.
The position of the brake master has been changed.
Strain on the brake hose.
Mirror position also needs to be fine-tuned
Position is certainly good.
It is similar to the Image in Separate handle, but
The overall width will be wider than NORMAL.
From OEM position
Forward, Low, Wide
But if I wanted to, I could change it to
Forward, Low, Tight
If you have all three.
I personally think it's better than that.
View detail
Fits: YAMAHA XJR400, KAWASAKI ZRX400II, SUZUKI GSX400, SUZUKI INAZUMA400, SUZUKI GSF750, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, HONDA HORNET600, HONDA HORNET250, HONDA VTR250, HONDA VTR TypeLD, YAMAHA XSR700, YAMAHA XJR400R, YAMAHA XJR400, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400FOUR (water-cooled), HONDA CB400SF
About shipping time
I ordered Separate Handlebars from Webike and received an email saying the shipping date is around January 7, 2021. If you have three months, please do something about it. View detail
Fits: HONDA CB1100, HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA FTR223, HONDA FTR223, HONDA NC700X, KAWASAKI 250TR, KAWASAKI W400, SUZUKI RV200 VANVAN, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, Others , YAMAHA TW200, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW225E
When in doubt, this is it
HURRICANE HURRICANETrucker special Φ7/8 inches Handlebar Steel was needed for this one, so I bought it.
I think the quality of the product is reasonable for the price range
It's safe to say that you won't be disappointed by the amount of gold you buy, which is Large
I bought the product and I don't feel like I'm losing money
As far as shopping goes, I felt like it wasn't a loss
It is a product worth the Gold amount
View detail
I couldn't get it on normally.
I tried to install Stem Cover on SG03J which is not 2001 Type S with OEM Handlebar which removed only Cover, but it was impossible to install it as it was.
So we did some work on it.
View detail
Fits: HONDA CB400SF, HONDA CB400SUPER BOLDOR
It varies from person to person.
I bought it used.
1：HandlebarBody
2：Long clutch wire
3：Long Accelerator Wire
4:Extension horn harness
5:Stainless Steel Mesh Brake Hose Extension
More than 5Quantity:The Horn harness was not included in the set, but I was able to install it.
Replacing the Clutch Wire and Stainless Steel Mesh Brake Hose is easy, but even as a former mechanic, I had to pull the carburetor so far out of the carburetor because the Accelerator Wire was so Large strange to replace.
If you're not confident in your maintenance skills, get a motorcycle shop to do it for you.
Brake hose replacement is also dangerous from a maintenance standpoint, so I recommend you to have a PRO do it.
The photo shows a comparison with the manufacturer's Quarter3
I liked the position of the Handlebar, but the aperture is so different!
The aperture was too tight, so I replaced it immediately.
The dimensions are published on the manufacturer's website, but the numbers don't tell the whole story.
HandlebarSingle Body and may be sold at motorcycle supply stores, so you should check it out in person.
The height of the Handlebar is also limited to ±4cm in terms of vehicle inspection, which is over, so CB400SF (NC39) is apparently not allowed.
That's all I have to say for this evaluation.
View detail
Fits: HONDA VTR250, HONDA VTR TypeLD
It's nice
The loose rear view was Refreshing. I am satisfied with Large because it was easier to install than I expected.
Stop-lamp is also a nice, modern name for the LED.
View detail
Fits: HONDA CB750, HONDA CB400SS, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB1100, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200, YAMAHA SR500, YAMAHA SR400, Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI RV200 VANVAN, SUZUKI GSR400, KAWASAKI BALIUS2
Feel free to change the position
I wanted to move the Handle position up and back a little bit, so I changed from the RENTHAL that I had been using.
My impressions with it are...maybe a little too Upright...after all, the BMConti3 model might have been better.
There are a lot of lineups in this Handlebar, so you can try to change the position based on the dimensions of this Handlebar.
I selected the Iron Handlebar Black Paint Spec. for this project, but I felt that the paint quality was not as good as it could be. The paint film is thin/weak feeling. In fact, a lot of Wound is attached at the time of installation, and in addition, the paint is peeling off the Choke Lever sliding part (of LeftHousingSwitch) also after a slight period of use. Next time you will probably choose something other than the Black paint spec.
View detail
Just the right length.
The handlebar change was not long enough for the OEM length, so we decided to change it. 100mm+100mm compared to OEM is available from many manufacturers, but the wire is quite loose in that case, so we found this product and chose it when we were looking for +50mm.
Since HURRICANE is known for its parts around the Handlebar, there were no problems with the accuracy and construction.
However, there is only a transparent wire outer, and all other wires are black, so it is conspicuous. If possible, I thought if there was a lineup of Black as well.
View detail