Reviews
Recommended for Fender Eliminator vehicles.
I was able to install it on KATANA.
This is a recommendation for those who are using Fender Eliminator.
View detail
subtle
It's hard to put on, it's easy to get scratched on various places, the difference between domestic and foreign products is huge, and it's expensive. View detail
Natural.
The front fender of the SV650 is short, and every time I went touring, the Radiator was hit by small stones and dirt from the water splashing on the road. I installed this product and I think the effect is large.
As for the attachment, it seems to be attached with strong Double-sided Tape. However, because I was a little worried if it was only that, I drilled a hole and fastened it with Screw of the attachment.
It looks so natural. It was there from the start. It's like that, so it's Recommendation.
View detail
Fits: YAMAHA Fazer 600 2002-2003
Understated OEM style design
[How is it used?
I'm using it for street riding and touring.
Was the one you received as per Image?
I wanted something with an understated OEM style design and Image was right on the money.
Material is black gel coat material which is standard for this kind of handmade products.:FRP。
The whole thing was carefully finished and there was no rough surface or section.
Was the installation difficult?
I had some trouble to remove the OEM chain cover and to pass the front mudguard of the Fender between the Tire and Swing Arm.
How was your experience with it?
I imagined that if I remove the OEM mudguard right behind the rear suspension, the air flow behind the engine would be rectified and the cooling efficiency would be improved. I imagined that removing the OEM mudguards would improve the cooling efficiency, but I haven't removed the OEM mudguards yet because I don't think it would make much sense since the engine is not very thermally sensitive. (Lol)
[Included Parts:were they on?
3 screws and 1 oval plate for fixing Fender. 3 screws and 1 oval plate for fixing Fender.
[Was there anything that disappointed you?
If I had to say, it would have been better if the Chain Cover part was 2cm to 3cm longer in the front direction.
Other items that would be helpful
Instruction Manual was included, but of course, it was English version, and moreover, it was roughly large. (Lol)
It is not difficult to install because it has few parts.
Since there are only 3 fixing points, it may be safer to use a low strength screw lock.
The delivery time was about a month and a half, which is reasonable since it was ordered from Europe.
View detail
I like the way it looks.
The slimness is attractive because it is VTWINEngine, but I thought that it was a little lonely under the tank, so I felt that wearing Under Cowl would give it a sense of gravity.
But this is just my impression.
OIL replacement and Element replacement are also possible while the unit is installed.
This is a Large thing Point!
View detail
Simple & Practical but Pricey
It is a simple installation, would not take more than 15 minutes to install. Light ABS material and given strong adhesive double-sided tape is all it needed. Having a mud-guard is practical in helping to guard the beautiful chrome exhaust extractor/radiator from pebbles, mud and sand. Haven't driven in heavy rain yet, hopefully it will hold up. The only drawback is the price. View detail
Fender Eliminator + SprayGuard.
Removed Fender with the presence of KATANA
Lightweight with SprayGuard
The Rear area has been Refreshing.
View detail
Lightweight with SprayGuard
Was the one you received as per Image?
As per Image… The downside is that it's expensive.
View detail
Lightweight with SprayGuard
Was the one you received as per Image?
Lighter than I imagined …Large satisfied
View detail
Easy to install, looks great!
The overall look is stylish and well made. Quintessential Made in Italy good looking.
However, there is a part where the making of the fixed part and the chain cover part is lenient, and I think that it is not possible to make it a little more cool.
It was thought that it was impossible to ask for the goodness of the making of the JAPAN article to a foreign product.
View detail
It will serve its purpose, but...
It can be weight heavy to begin with. While understanding that, the appearance is about 100. Because it is resin, it is light. However, only a lid, it is far from Dress-up.
The description doesn't lie, but I honestly Shock that this is 3000 yen.
I don't write impressions on a regular basis, but I thought I'd post this for the benefit of VstOwner.
By the way, I hit it with a mallet because it didn't go in snappily.
Well, puddles, pride won't get in...
View detail
A change in ride quality.
When you install this on a normal Single seat cowl, I feel that the ride quality is improved a little bit when it is leaning forward from the normal riding position with speed.
I'm a little nervous about having nothing, but I feel more comfortable with this.
View detail
Installation is a little bit large.
The installation was a little Large strange. However, it looks better than the OEM, so I think that's a good thing. I think that the person who wants it should purchase it as soon as possible because the delivery time is very long. View detail
It's hard to get it right!
I used it for Seat of MT-09SP. Cut is necessary to avoid interference with the lens.
It looks cool on the outside, but if you put a SeatBack on it, it will be slippery. No recommendation.
The design is like a casual Single Seat, and I want to customize it in a casual way. I can recommend it to anyone.
View detail
Nice installation
After the Fender Eliminator, if you have a stone splash on your back or Seat, or if the water bounces off your back I installed this in disgust because it made my back chatter
The volume feel in the back is up, and I like the look, a lot!
For the time being, there are no more stone splashes No more water splashes on my back
I did the installation myself
The Rear Axle Shaft must be removed and the Shaft must be inserted backwards
Also, the SprayGuard mounting part doubles as an ASKULBlock, so 1pc. is not required It becomes unnecessary
If you're not sure, it's best to have a motorcycle shop install it
View detail
It's unquestionably cool!
It's installed on a 2018 MT-09SP
A good price, but it's a good looking product for it
About the appearance
I was wearing a screen made by another company until I purchased this product, but I just couldn't I was looking for a more Sharp product because it would have a wild look to it
I really like this one because it's Sports like Styling in that respect
Combined with the design, it's probably not an exaggeration to say that it's an OEM (Lol)
About the texture
Many people may be concerned about this place because it's an international product
Personally, I don't have a problem with it at all
Reverse side as shown in the third picture (Ruff?) is a bit BALI-esque, but I don't mind it at all
The surface is perfectly clean!
About wind protection
It's in the name of the product as Screen, but it's Cowl
Don't expect the wind protection to be effective
But.. "Run the Circuit! And "Fast and frequent! Unless you're the kind of person who says, "I don't have to worry about that at all!
View detail
A great sense of togetherness
The included Double-sided Tape" which combines geometric shapes; StickFit" is super strong To install it, you'll need some DIY skills to be able to use at least Drill It's also possible to attach it by StickFit alone without drilling any holes, but it lasts nicely and permanently If you're going to let me do this, I'd still like to unload the OEM Fender from the body and use the included plastic Rivet to make it work It should be installed The drill bit needed is 4mm, and it was fixed firmly as if it was integrated The shape is also very natural. The manufacturer's published installation video (https://) shows the installation in action www.youtube.com/watch?v=Zb9sf9KeTRs is a working video of the manufacturer's installation It helped me to grab the Image
Edge treatment is a bit messy so I used Sandpaper to prepare it. brakeHose clip back nails The indentations for the release were machined into holes for ease of maintenance after installation
View detail
Fits: SUZUKI GSF1250, SUZUKI GSF650, SUZUKI GSX650 F
No more rear box mud splash
Even though it's a sunny day for touring, I don't want to get the underside of my rear box dirty in the tunnel or on the mountain roads I put it on the
I can now run comfortably
I just asked my wife how much it looked like and she said $500!
But it's a product that Japan doesn't have, so I don't have a choice
View detail
Fits: HONDA CBR 300 R, HONDA CBR 250 R, HONDA CBR 125 R
It's useful, but..
Manufacturer in the United Kingdom before we started selling them in We-Big It is ordered and used directly from
When I had a short fender in the past, I had to change a plug to an Engine I looked at the top and was surprised to find it covered in mud that had gone through the Radiator So I decided to go back to NORMAL and extended it anyway
As expected, the accuracy is poor due to overseas quality, and it is designed for Normal fender It doesn't completely fit while you're doing it If you match some parts, others will float Since it is dangerous to fall off while running, use Double-sided Tape as a temporary fixation and use Plastic Rivet Fixed is recommended (it should be included if the Spec. hasn't changed)
If you look at it from the side, it is assimilated with the Black of Tire, and there is also a contrast with the color of Fender I think it's not so obvious at a distance
Functionally, I can see that the mud is now lowered in a lower position, so it works
At this price for a small piece of plastic, you can't help but be hesitant, but the possibility of rain If you're a frequent visitor to Ron Two, where you can't avoid sex, you may want to consider it
View detail
It's okay
I posted the installation process in my diary, but I think the accuracy is good However, unless you have the ability to work on it to some extent, you may need to do some Fender detachment and drilling I think Hurdle is expensive I was worried until I got a temporary fitment because the product image is a completely different car model I contacted We-Big about this before I bought the car and they confirmed that it was installed I don't know because I don't have one," was the answer Isn't this answer a bit harsh? View detail