Reviews
Fits: KAWASAKI KZ1000, KAWASAKI KZ900, KAWASAKI KZ1000, KAWASAKI KZ900
Great design fuel tank stickers
It’s almost the same as the picture in the picture, but the only problem is (see picture). Because this sticker has a large area, it must be folded when expressing it. It may have been folded for a long time, so the bent part There is a phenomenon of separation between the sticker and the bottom. Because it has not been posted yet, I am not sure whether this will affect future use. I suggest that the supplier can roll up this sticker for transportation without creases, which may solve this problem. ---------------------------------------------- And the picture looks almost no difference, but the only problem areas are (see picture), this sticker because a large area, so the delivery time must be folded up, it may be folded a long time, so the bent section there have been isolated phenomenon stickers and below. Because no stick, so I'm currently not sure this will not affect the future use, I suggest that suppliers can put this sticker roll up transportation, do not crease, you may be able to solve this problem. Powered by Google Translator View detail
cheap and inexpensive goods
After a month and a half of postponement of the order, the arrival date was postponed two or three times, and it took a month and a half for the product to arrive, but the Cowl was a Pe LePera, and when I tried to paint it, the wind almost blew it off. I don't want to get upset or make a fuss over a little thing, as I've been tinkering with any car model, but I can only assume that they're licking their customers too hard. View detail
Fubo / Windshield
Windshield, does what it was made to do and looks cool doing it. Installation was easy and straight forward, Doesn't come with directions. View detail
Fits: SUZUKI BANDIT250 GJ74A, SUZUKI BANDIT250 [Bandit] GJ74A, SUZUKI BANDIT250 [Bandit] GJ74A
For a low and wilde style!
It is White Gel Finishing and must be painted
Spray and Urethane in Primer surfacer and Black metallic [Color] I painted it in Clear
After installing the Bracket, bolt the Under CowlBody to the Bracket It is completed
The space underneath the Engine fills up and it looks low and Wilde!
It went well with the Bikini cowl I was wearing earlier, and it was a great style
View detail
Cospa is the best
I used to have a manufacturer's aperture, but it was distorted when it fell over, so I bought it and then I got it I did
The Clamp part is also notched, and the price is half the price of a certain manufacturer's product I am satisfied with it
View detail
ACP CHERRY WINDSHIELD
This is a great quality windshield from ACP, It looks very well made and was easy to install, The worded instructions are in Japanese but don't let this put you off as there is a superb diagram showing how it fits and includes a clear parts list Thank You Web!ke for good service View detail
I'm glad I bought it.
APE's Z Spec that I bought in second hand. I am on board. Because the position of Tail cowl and Tail lamp did not match until now, Cowl was held with Tying Band, but it was possible to install it exactly with this product.
However, depending on the shape of Tail cowl it may not work as it is written in other impres,
View detail
Cospar good
Making is somewhat rough, but it is a good product when considered from the price
In fact there was no Red Reflector with an outer diameter of 60 cm and even if I ordered from the Parts List of GS 1000 S, I gave up because the Yellow color arrived but I found it by chance and immediately bought it
Yahoo! Auction etc. But occasionally I sell Red Reflector but I do not have Size or much less much for GS 1000 S
Those who adhere to OEM I think that it is better to avoid those who stick to quality
I think that there are many people who want to turn it to other parts rather than expensive gold to say so privately But it seems to be a good part for anyone who says so
Personally I'm satisfied with Large
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
It looks nice
I think that this product looks good as well as make and weight feeling is good. Installation is easy and OEM is 3 Screws, but this part is ScrewQuantity : It is 2 pc stop. I thought that it would have been better if the back was slightly lower if there was one dissatisfaction. View detail
Fits: YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250
Refreshing!
I removed OEM's Fender and installed my own Aluminum Mud Guard but it is purchasing to refresh the Tail lamp. Because it is Exclusive Design, precision such as Bolt position is perfect, but other Company Product is for Style emphasis or stair emphasis compared to OEM Product It is necessary to take measures against rain.
Spec. I think the appearance also became lighter as the Tail lamp can move.
View detail
a Wire and what -- it was insufficient -- coming out -- the shin.The texture of the Plating is O. The touch seen from before when the iris diaphragm was looser to a slight degree is whether it is good.Since it attached to the moped (cd90), it is conspic
a Wire and what -- it was insufficient -- coming out -- the shin.The texture of the Plating is O. The touch seen from before when the iris diaphragm was looser to a slight degree is whether it is good.Since it attached to the moped (cd90), it is conspicuous, and it is preeminent for a degree.
The notches of attachment are a moped and a medium size. Are they incidentally, different naturally?
Do I feel that it stood enough by 25up well?To the CB400T or GS, he may be stern exactly.
View detail
It attached with the Z400FX specification Goods purchased simultaneously. It is very good touch. Fine finishing was carried out for extracting and has been attached firmly. It is large satisfaction that he was able to buy with this price the goods which c
It attached with the Z400FX specification Goods purchased simultaneously. It is very good touch. Fine finishing was carried out for extracting and has been attached firmly. It is large satisfaction that he was able to buy with this price the goods which cannot be regarded as it being about demand so much. Do about [ that the plug terminal of wiring differs in the APE, the TAB, receptacle, and the Size although the subject has become APEs, and it remade all after all to it ]? View detail
Fits: HONDA HORNET250, HONDA HORNET250 [Hornet]., HONDA HORNET250 [Hornet].
Since it was worrisome from before, he bought it. attachment was simply completed, when even the tool was assembled. Since it was not carried out, paint application was applied by itself. Since it was smeared well, it was good.
Since it was worrisome from before, he bought it.
attachment was simply completed, when even the tool was assembled.
Since it was not carried out,
paint application was applied by itself.
Since it was smeared well, it was good.
Since goods good comparatively [ cheap ] were obtained, I think that it was good.
View detail
[ -- the Webike Monitor ] -- since the product of this Manufacturer seemed to be the strongest, it purchased. However, since the Muffler was changed, pains were taken to insert in a left-hand side Nut. I also regard the Washer as two sheet
[ -- the Webike Monitor ]
-- since the product of this Manufacturer seemed to be the strongest, it purchased.
However, since the Muffler was changed, pains were taken to insert in a left-hand side Nut.
I also regard the
Washer as two sheets being insufficient.
Although the Review that the
Water Hose is crushed was seen by somewhere, I think that the position which it probably lets pass is mistaken.
(Some are pushed) After
attachment is firmly carried out by touch that it remains unmoved.
A Crankcase will be protected.
View detail
Fits: HONDA HORNET250, HONDA HORNET250 [Hornet]., HONDA HORNET250 [Hornet].
Some Radiator hoses and Side-stands portions are only deleted at the time of attachment. I am a Red as the rest is applied to a favorite color.
Some Radiator hoses and Side-stands portions are only deleted at the time of attachment. I am a Red as the rest is applied to a favorite color. View detail
In order that left-hand side Switch BOX might interfere, it attached contrary to original wearing. since the direction of CB750 has a little large Pitch of the tapped hole -- with Pons -- it cannot do (only a hind Screw is tightened) -- it is pleasin
In order that left-hand side Switch BOX might interfere, it attached contrary to original wearing.
since the direction of CB750 has a little large Pitch of the
tapped hole -- with Pons -- it cannot do (only a hind Screw is tightened) -- it is pleasing in the atmosphere UP.
Especially in the direction only for
vehicle type, it is recommendation.
Although the
price is by no means cheap, the circumference of an Engine becomes a Race ish.
View detail
It purchases by APE 100 Parts search. Although many things were processed, attachment is given up eventually. It seemed to be only for APE 50. If it attaches to 100 and has indicated that it is improper ...
It purchases by APE 100 Parts search.
Although many things were processed, attachment is given up eventually.
It seemed to be only for
APE 50.
If it attaches to 100 and has indicated that it is improper ...
View detail
It purchases, in order to equip a Hardy Handlebar weight. Although the Bar end cap was attached also to the said Handlebar weight, since the form where the Edge was effective did not suit the Style of own KSR, it changed. Since the Bar
It purchases, in order to equip a Hardy Handlebar weight.
Although the Bar end cap was attached also to the
said Handlebar weight, since the form where the
Edge was effective did not suit the Style of own KSR, it changed.
Since the
Bar end cap fastened for some Manufacturers and differed in the form of a lump part, it also had [ whether it is attached to
bar Weight, and ] uneasiness, but the brilliant Match of this was carried out.
Very much satisfied also with plain form.
View detail
Very well made. I hope it won't rust. Instructions are only in Japanese, and photos are very small and b/w. Some modification required as the top metal attachment sits about 5mm too far back so the plastic fairing does not line up with the back lug hole
Very well made. I hope it won't rust. Instructions are only in Japanese, and photos are very small and b/w. Some modification required as the top metal attachment sits about 5mm too far back so the plastic fairing does not line up with the back lug holes and front screw holes, once you bolt everything together. There are long or lengthened holes for the lower main steel piece which are not necessary. The upper piece should have the long holes so that mount can be slid back to align the fairing. Also when fitting the tail light, note that the original fender plastic is thicker than the steel. You cannot use the original alloy inserts that sleeve the mounting bolts. Just use the large washers provided with the kit. Overall, very well made, looks fantastic, but not immediately bolt on for Kawasaki Zephyr 750 C1 View detail
[Use vehicle type] Kawasaki ZEPHYR chi Although the 2008 model [reason for use] friend uses, Since it exchanged for the Undercowl of the other company, when it will get if it can equip since it does not Use, and temporary wearing wa
[Use vehicle type] Kawasaki ZEPHYR chi Although the 2008 model
[reason for use]
friend uses,
Since it exchanged for the Undercowl of the other company, when it will get if it can equip since it does not
Use, and temporary wearing was carried out, there was some
interference, but since it was able to equip when deleting some, it obtained.
Since the
[processing]
and a Muffler interfered a little, shaving was required.
It is better to be by mind of also deleting the object for vehicle types, since it interferes by the
[evaluation]
and a Muffler.
Although it was
and a smallish Undercowl, since !!
extravagant had not used a Makeover perfectly, it became smart shapely.
A price is cheap to the Undercowl of
and the other company.
cautions: Since the Engine lower part is not covered, Circuit use cannot be performed.
It is an object for Fashions to the last.
View detail