Reviews
Fits: HONDA NSF100, HONDA GROM, HONDA NSR50, HONDA NSR80, HONDA NSF100, HONDA GROM, HONDA NSR50, HONDA NSR80
For Regulation compliance
[How is it used?
At Circuit, as it is required by Regulation in some places to prevent Caliper from falling off.
Was the one you received as per Image?
Yes.
Was the installation difficult?
It's easy
However, Wiring is a bit of a chore without Wire twister.
How was your experience with it?
After all, ready-made products are easy and good.
Considering the time and effort required to drill the Bolt head by yourself, I think it is better to buy one.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I think that people who attach this type of component will eventually want a wire twister.
View detail
useful
The material is soft and comfortable, and my fingers stay cool even in the middle of winter, so it is very useful. View detail
Minimoto's CircuitSpec.
I used it to turn my DR-Z70 into a mini circuit, and of course it works with the DR-Z50 from KidsforRace.
For GCraft's MONKEY/GORILLA Footpeg Agaru-kun The combination of the two. It is about 30mm above and 30mm behind and is Exactly as Rear Sets. footpeg is basically gone. It is good.
View detail
Tidies the wire system on your handlebar
Installation was easy and it can be customed to the desired length. Looks wise, it creates a singular and more neater at the steering area. Material is also sturdy and it stays at the position where you set it. View detail
Exactly to Wiring Protection
[How is it used?
When I installed YOSHIMURAOil Temperature Meter on XJR400R, I needed to run the wiring from the back of the engine to the drain bolt to connect to the sensor, but I bought this product to protect the wiring because it is close to the drive unit. I purchased this product to protect the wiring because of its proximity to the drive unit.
How was your experience with it?
The coziness is like a normal Spiral Tube.
It was thicker than I expected, but within the acceptable range. 2m long, so there is quite a bit left over, but it is necessary when customizing electrical systems, so it is good to have it.
How did it compare to other products?
The Spiral Tube was originally included with the Oil Temperature Meter, but it was a bit thicker than the Spiral Tube.
It would be nice to see a little more Size development.
View detail
Fits: HONDA Super Cub 70, HONDA Super Cub 90, HONDA little cub, HONDA little cub
Don't let others make the same mistakes2
Used for square eye CUB90Custom HA02-180,.
I couldn't do it.
The size doesn't fit at all. The overall length is too short and the inside diameter is too small to fit at all.
The manufacturer's website says "Custom" is not available, even though CUB90 was listed as compatible. I made the same mistake as when I bought Grip before. Another waste of money.
There are so many types of CUBs that it's hard for a CUB novice to find the right one.
The product looked good Large change. It has a good rating and is inexpensive.
I would like to see the size indication.
View detail
Fits: YAMAHA TZR50, KAWASAKI ZEPHYR750, HONDA NSR50, HONDA NS-1, HONDA CB400SF, KAWASAKI ZEPHYR400, YAMAHA XJR400, YAMAHA RZ50, HONDA NSR250
One point
The OEM Clutch adjuster is Black and was replaced.
The performance of the motorcycle will not be improved just because it is attached, and it is completely self-satisfying parts.
View detail
You don't have to have it, but it's still better to have it.
I have always wondered about this contact, but it is indispensable for Plug connections. In the past, it was attached to Plug as a matter of course, but recently it is not attached, and when I wanted to use it, I had to purchase it because I did not have it on hand. View detail
Repair Oil Seals for Front Sprocket Shaft and Shift Shaft on the Grom
About quality and texture: I am happy with the quality of the oil seals from CF Posh, the outer diameter of the oil seals are a hard plastic to press into the crankshaft case while the inner diameter of the oil seals are a soft rubber to form an oil tight seal against the metal shafts. About the feeling of use: The crankshaft cases had been opened for internal upgrades and I thought it would be wise to also renew these oil seals to remove the chance of oil leaks from these two points soon after the rebuild, no oil leaks to date. Products to buy together: The crankcase cover gasket set from CF Posh would also be desirable to purchase along side these oil seals as these gaskets do need replacing during routine maintenance. Difficulty of installation: The process to install takes about 45 minutes, remove the front sprocket cover and front sprocket and then pry out the old oil seal. Position the new oil seal and press it into the case. Same process for the shift shaft but you need to remove the shift linkage for access. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a quality set of oil seals from CF Posh and it was in stock ready to ship unlike the individual Honda oil seals but the pricing from Thai Honda motorcycle parts is cheaper. About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: I have purchased a few items from CF Posh now and am happy to recommend them as their quality is excellent and their pricing is competitive. View detail
Fits: HONDA monkey, HONDA ZOOMER(Ruckus), HONDA GORILLA, HONDA APE 100, HONDA APE 50, HONDA NSR50, HONDA NSR80, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA LIVE DIOZX
To strengthen Plug!
PlugWiring has been enhanced incidentally due to deterioration. It can be supplied stably. Reliable Posh. View detail
Fits: HONDA Ape 100, HONDA XR100 Motard, HONDA Ape 100, HONDA XR100 Motard
Quantity:1 Set of 3pcs.
When changing the oil, we found oil leaking from the kick shaft, so we also changed the three oil seals on the shift shaft and drive shaft at the same time. This product is Quantity:I like it because I don't have to worry about buying them separately since they are 1 set of 3pcs. View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG
Maybe only the Owner can understand?
I think there is no difference even if it is said that it is this from the beginning, though only the Owner may understand. I am satisfied with Large.
Installation can also be done by beginners.
Recommendation
View detail
footpegBolt for Replacement
I have converted to Rear Sets for OEM diversion, but the NORMAL screws were not long enough, so I bought them for replacement.
Posh Screw is written with the proper strength, so I was able to use it with confidence. I have not had any problems so far, even though it is a weight-bearing part.
View detail
To combat the cold.
I use it every year to prevent my hands from getting cold from leever. View detail
Fits: HONDA GORILLA, HONDA MONKEY
Easy to adjust
Simply replace with Idle Screw. Easier to adjust! View detail
Rare Material:Stainless Steel's BlackBolt!
[How is it used?
Since the Headlight Bracket was changed to Black, the Bolt stood out from the Silver one.:I looked for Stainless Steel with Black Painting and finally found it.
Was the one you received as per Image?
It was more matte than Image, but the paint never peeled off and the accuracy is fine.
Was the installation difficult?
The Bracket section requires a collar, but can be used with Bolt On.
How was your experience with it?
I like it better than the NORMAL because it is chic and less noticeable and the paint does not peel off due to tightening.
[Included Parts:were they on?
Nothing.
[Was there anything that disappointed you?
Nothing in particular, but the price aspect is Quantity:1 Set of 2pcs. seems a bit expensive while
▼Material that wasn't even a Screw specialty store.:The Stainless Steel Black Bolt is very appreciated. Especially, the lineup of lengths is also very good.
View detail
Anodized for fine-tuning of hand guard, rust-free
[How is it used?
We used it to fine-tune the CYCRA hand guard.
Yamaha cars are MASTER to avoid Hit because of Banjo on the outside.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
There is no problem just to pinch it.
How was your experience with it?
Since the product is Anodized, we hope it will not deteriorate.
Normal aluminum colors tend to cut-out and rust.
[Included Parts:were they on?
Color only.
[Was there anything that disappointed you?
There is also a length Lineup, which is just right because it is Anodized, but
It's a bit expensive
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CRM80, HONDA CRM80, HONDA CRM80, HONDA CRM80, HONDA CRM80, HONDA CRM80
CDI replacement
OEM CDI replaced with Super battle due to breakage. View detail
great glasses
This CF POSH2084 is a pair of glasses specially designed for knights. It comes with a detachable face liner. The glasses are made of polycarbonate. The surface is light smoke color, which can resist impact and ensure eye safety. It is also very clear that the genuine webike guaranteed delivery speed is worth buying. -------------------------------------------------- -------- This CF POSH2084 is a special surrounding knight -designed glasses. It has a removable facial pad. The glasses are made of polycarbonate. The surface is light smoke to resist impact. It is also very clear that webike genuine guarantees that the delivery speed is worth buying. Powered by Google Translator View detail
Good appearance.
It looks and feels more like an old car.
Parenthesis is better now.
View detail