Reviews
Fits: HONDA SUPER CUB 110, HONDA CROSS CUB, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CROSS CUB 110
Change rodSupport
There was also an Installation Instruction Manual, so I think this is a friendly product. It took about 20 minutes to complete the work.
My impression of its use is not good.
There is a sense of being able to firmly Shift change.
I think it could be a little cheaper.
View detail
Protection of SR400 License Plate.
I feel that the License Plate does not shake so much when idling. Also, I feel that the License Plate Holder and the License Plate are firmly fixed. View detail
Posh Terminal nut Item number:800024
The old Plug always came with a terminal nut, but that has since disappeared.
I recently had difficulty starting the engine, and after inspecting each part, I noticed that the terminal nut was missing, so I decided to purchase it this time.
View detail
Stainless black
The Flat Washer is also stainless black along with the Fixing Screw in stainless black.
It looks nice, but this price for two pieces is ….
I wish it was cheaper.
View detail
Black
The Black bracket and Silver Fixing Screw stand out, so I bought it to unify them with Black.
Stainless Steel's Black, I couldn't find a place near me that had it, so it was a great help.
View detail
Stainless Steel Fixation
Fixing Screw to be rust resistantMaterial:Replacement with Stainless Steel.
It helps that I can choose the Size I want.
View detail
Fits: HONDA GORILLA, HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
With Bullet terminal
I am usually satisfied with the products of this manufacturer, therefore I did not hesitate with the choice. In general, there are no complaints about the quality, everything works. I want to note an adequate price for this product. The only unpleasant moment is that I have incorrectly selected the connector. It was more convenient to choose when the connector types were signed in the pictures or to add more understandable information to the description. In general, I recommend it. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
no problem
CB223S is not in the list of compatible models but can be used.
I chose it for dress-up as well, since the original Nut had left on its journey after forgetting to fasten the main fastener.
I think it is overpriced for something that is hard to see.
View detail
Fits: HONDA NSR80, HONDA NSR50
Coil and cord in one piece
Coil and cord are integrated into one unit, reducing the risk of poor contact during installation.
Note that the Plug to be used is the one with Terminal, so if the original is Screw Type, the Plug cannot be used.
The Coil side has the same shape as the NORMAL, so there was no confusion in installation.
View detail
impulsive buying
I saw it on social networking sites and thought it would be a good product to personalize Motorcycle.
We considered other Manufacturer's products, but because there were many users of this product, we purchased this one.
Spec. to be sandwiched in a circular Acrylic, so depending on the Ideas, it can be personalized with various Materials and Designs.
View detail
easy manual cruise control
I have used many type of throttle assist but most of them are not fixed when I turn the throttle on a long journey, especially when it rains. I installed CF Posh throttle assist on Suzuki V-strom 1000 (and now on Ducati SF), it can fasten to the throttle grip so I feel very comfortable during long journeys. View detail
Fits: YAMAHA TZR50, HONDA NSR250, YAMAHA XJR400, YAMAHA RZ50, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA NSR50, HONDA CB400SF, HONDA NS-1
Easier to adjust.
I bought it because I thought it would be easier to adjust by making the Screw part larger.
Satisfied with the results, as they are easier to adjust.
View detail
Fits: HONDA LIVE DIOZX, HONDA ZOOMER, HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR80, HONDA NSR50, HONDA APE 50, HONDA APE 100, HONDA MONKEY, HONDA GORILLA
the expendables
The SUPER CUB C50 was not starting well, so I replaced it with an NGK plug cap at the same time.
Now it takes only one KICK to hang Engine.
View detail
Security, looks, expandability
I wanted to include a Cali Sticker Plate, so I attached it to the local Number with the company's Torque screw 25mm and 6M× diameter 18mm× thickness 3mm Spacer, which is sold separately.
Note that the Wrench for the Torx screw (sold separately) has only one tinkering hole.
View detail
Hara1 Local Number only
We purchased this for our Hara1 local Number.
Fit the local Number with no problem.
We recommend that you measure the dimensions of your local number in advance.
Width is as in previous Impression.
View detail
Huh?
There is a tinkering hole on only one side. View detail
Fits: HONDA SUPER CUB 110, HONDA CROSS CUB, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CROSS CUB 110
I feel the effect.
The CUB has a long change rod, and we were concerned about damage to the oil seal caused by the change.
An 8mm box is sufficient for the work, but a Universal joint might be useful since the footpeg gets in the way. I forced myself to turn it with Extension.
I also put some grease on it to prevent some of the wear.
View detail
Fits: YAMAHA TZM50, YAMAHA RZ50, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA NS-1, HONDA NSR50, HONDA NSR80
You can make it as long as you like.
It can be adjusted to the desired length.
The rubber part of the Shift is a little hard and slippery, so if you are used to OEM rubber or do not like the slippery feeling, you should take countermeasures.
View detail
I expected so much, but ...
I had tried Nology hot wire on a SEA BASS DR250 a long time ago and was amazed at the top speed, acceleration, and fuel economy, so I wanted to try ignition tuning at some point. So I wanted to try tuning the ignition system sooner or later, and since Nology itself seems to be a product from the past and I couldn't find a plug to match it, I installed this product. I had to remove the cover and other parts to install it, but there are some problems such as the nails breaking due to the hard plastic. I am annoyed at that stage. Personally, I think it would be better to use a polycar like Radio controlBody. I guess... And if you follow the Instruction Manual, you can install it without any problem. I am attaching this product with Denso's Iridium Plug. The Plug cord is red on the outside, You're changing something." The sound is about the same as the original. The sound is a bit thicker and more dynamic. I feel that the acceleration and maximum speed have not changed much. However, fuel consumption increased by about ? I haven't changed the way I drive. I haven't changed the way I drive, and I don't care how I open the Axel. But it is better than 3~5km every time. I got 67km/l on a day trip of over 150km the other day! How many times did I retype the calculator? So, it is expensive, but I think it will pay for itself. View detail
Gorgeous because of its color!
We replaced it incidentally when adding a Hook around the License Plate area.
The Torque bolt has a flat plate screw head, low volume, and a thin aluminum tray for a clean look. The aluminum tray is also thinner and looks more stylish, whereas a normal bolt looks rugged.
You will need a T30 Torque to install it, but it is not included with the product. It would be a waste to buy it just to install this, so we recommend checking to see if T30 is available beforehand.
View detail