Reviews
Mold prevention? Purchased for
Purchased for Helmet used during summer and rainy weather, as it is said to absorb sweat and moisture.
Helmets that are not used very often are prone to Mold and could be used for storage.
I used it on a Helmet that I used in wet weather, and as expected, the areas where the Silica clinker could not reach remained wet.
However, the area in contact with SilicaClean was dry.
I would like to expect Mold prevention effect.
View detail
For those who are feeling the cold limit.
SR400 has a small battery capacity, and I was worried about using a grip heater, and was hesitant to use electric heating gloves because they are expensive.
So I bought this product to try it out and was impressed when I used it.
First of all, it keeps my fingers cool because they are not exposed to the driving wind, and it is waterproof, so a little rain is no problem. (However, it will soak through the cracks a little, so that the fingertips will be a little damp after 30 minutes of driving in the city).
The design is also cute, just like the Mitten that Red-chan does.
View detail
Short Maybe too short for lever.
Installed on the short lever of NisshinHorizontal TypeMaster Cylinder.
The fit is a little worse with the short lever.
However, I don't mind using it because it doesn't make me gap.
It is functional.
View detail
To prevent Lever from slipping.
In the winter, I use Heated Gloves, but the Gloves do not have non-slip fingertips, so the Lever slips.
I used to put textured anti-slip tape on the reverse side of the lever, but now the leather of the glove has become rough.
That's when I found this product.
I sprayed a bit of perc on the inside and slid it onto the Lever and installed it.
If you use Silicon spray, it will shift even after you put it on.
The feeling of use is Large satisfaction.
You can now do subtle semi-cracks with electric Gloves.
View detail
![[YAMASHIRO] Special Tool DAP & DIE SET For YK-018 Motorcycle](https://global.webike-cdn.net/uiu/impression/202110/19_1018981_616e653ab5d59.jpg)
First Tap&Dice set!
[How is it used?
I use it to maintain my motorcycle! I hadn't used it before to clean Bolt and Screw holes with Beauty before, but now I use it on the Main to clean Disc Bolt and other parts that were coated with Screw lock material when I tighten them again.
Also, when I'm doing maintenance and the Bolt is hard to get in, I do both the Bolt and Screw holes as a shuffle before installing.
Was the one you received as per Image?
The product itself was just as Image! The size is also for Motorcycle, so it has all the size you need, which is great!
How was your experience with it?
It seems not to be suitable for a little hard usage such as using GunGun or cutting a screw mountain in a new base material.
We recommend that you use it only for Main, for example, to correct the actual object.
[Points to note]
As I said a bit earlier, I don't think the Material itself of this product is that authentic.
Hard usage may cause damage, so it's better to use it carefully.
How did it compare to other products?
Honestly speaking, I thought to buy Astro Products at first, but I picked up this one because the size of Yamashiro's motorcycle line up was excellent.
[Opinions and requests to Manufacturer
It's a cheap product, so it's probably a bad idea, but the package is too lousy.
Please make the package more considerate of storage! If not, it will become RoseRose and squishy, and sometimes I feel sad when I open the toolbox!
View detail
For Helmet hygiene.
I bought this to prevent sweat and odor of freshly taken off Helmet in summer.
It's pretty effective!
I wore it until I put on the next Helmet and there was no sweat smell.
View detail
In 1Season, the windproof material on the surface was shattered by ParaPara dust!
This Shirt was my favorite because it was warm, slippery, and thin, but I used it last winter, washed it, and stored it.
I took it out for an early morning course run in early autumn, but the windproof material on the surface was shattered into ParaPara, making it sticky and unusable.
It's a shame
View detail
I feel like I'm drying out.
Even if you're wearing an Inner Cap and the inside of the Helmet is a bit damp due to sweat penetration, just put this inside and you'll be amazed!
The next day it is already dry.
It will come in handy in many ways, such as using it every day when you come home or during the summer.
Also, when the moisture-absorbing capacity reaches its limit, you can tell by the Sign, so you can use it again after drying it.
View detail
I couldn't get into the GSX-S125 Plug from the side.
I thought that I would use it for the removal of the Plug of GSX-S125, and purchased it, but I thought that I could remove the Shroud and enter from the side, but it was no good. It is the selection mistake here. View detail
![[YAMASHIRO] YK-017 Side Stand Pad](https://img.webike-cdn.net/catalogue/images/55528/YK-017_BK_TS.jpg)
for use at home
Purchased to park for Vehicle on the road.
I've only used it a few times, but so far no durability issues.
View detail
Helmet interior drying.
I hesitated between this and the stationary type from DAYTONA, but I made the right decision.
This will be very useful for overnight touring.
It will be a flimsy piece of cloth, so it's very portable.
I think you'll find it highly recommended.
View detail
I'm trying to get my hopes up.
[How is it used?
Recently purchased and currently in use.
How was your experience with it?
Helmet deodorization and sanitization has become a concern as we enter the season of unceasing sweat.
Every time I do that, I spray Fa BREEZE to sanitize it. When it's bad, I use Helmet deodorizer, but it needs a power supply, so I have to pull out the power cord or carry it to the place where there is a power supply, and that arrangement has become troublesome.
So I reached out to this product that I've had my eye on for a while.
I've used it, and with Full face, Quantity:It's a little difficult to set, but you can use the hang, or the top of the head, as the Quantity:Set and put the SIDE part so that it may gradually accompany the edge of Helmet from the back to the front, and finally, if it stops with Velcro, it is completion.
As for the performance of moisture removal and deodorization, it is not yet Level that I can feel, so I would like to verify it in the future.
How did it compare to other products?
No comparison.
[Points to note]
It has a water supply sensor that changes color. It is necessary to pay attention to the dry condition of the product body.
Other items that would be helpful
Feedback on Manufacturer:Please make one for Boots.
View detail
They come in handy in the summer!
Works great as a moisture remover in the Helmet!
After using this, you'll feel silky smooth in a short time, which will reduce discomfort.?
Works fine with Full face!
View detail
Convenient and helpful
As a motorcycle commuter, I thought it was inevitable that Helmet's Cheek Pad and chin strap would get wet and feel uncomfortable to the touch on rainy days.
This product claims to protect against sweat in the summer, but I hate how sticky the Cheek Pad and chin strap feels on my skin the day after a rainy day, so I bought this product hoping it would alleviate that.
If you put this product in the Helmet when you get home, the Cheek Pad and chinstrap will feel smooth the next morning.
I want to be able to get into Helmet when I get home year round.
I got a good deal.
View detail
![[Motorsamurai] Stretch Rain Suit](https://global.webike-cdn.net/photo/impression/e5/e5137c76ab6ee46c7b428aaddfb9590bL.jpg)
Quality over price
The first thing I felt when I picked it up was that the texture of the fabric was better than I expected.
It is a Matte fabric with no sheen and seems to be durable while being Stretchy.
The storage bag is also made of a similar textured fabric that stretches and is easy to store.
Because I don't like running in the rain in the first place, I divided it into emergency use at the time of touring and bought it, but it seems to be able to expect enough waterproofness. (Because I am not blessed with the opportunity to use it yet, the actual waterproofness is unknown.
One point of concern is that there is no Ventilation. Breathability is a high number, but because there is no physical Ventilation, how far the steam escapes, this will be known when you actually use it.
I'm 168cm, 62kg, standard build, and I wore the size M. The pants are just right size, and the jacket is longer in the back. The jacket is longer in the back.
As shown in the image, the state of the storage, from 500ml pet to about 2 large, but I thought it was enough to carry Size.
View detail
Recommended for people who sweat a lot.
To the point where I was concerned for the summer because I use Full face where I am originally quite sweaty!
I bought this product because it had good ratings.
I put it in the Helmet after every run and it certainly dries well and doesn't smell after leaving it overnight.
Since cleanliness is paramount in these days, it is also recommended from the point of view of hygiene.
View detail
cleanliness first
I bought it because of the good rating of the impresion.
It will be active in the coming Season.
Quantity as there are 4 Helmets:2pc. Buy Set
Quantity after:2pc. Set is supported by 100-yen Goods
The rating is for now.
View detail
Realizes moisture absorption and deodorization
I bought this to keep it comfortable for as long as possible since I have a new Helmet.
The deciding factor in the purchase
I was skeptical that it would really work because of the pretty good reviews in the imprecations, but for this price, I thought I could make a mistake and bought it.
[Impressions of using it]
I put it in the Helmet the day I used it for a day of touring, and when I checked it the next day, it certainly didn't feel or smell damp.
To be honest, I wasn't expecting that much, so I was quite surprised at how effective it was.
I think that the moisture absorption and the deodorant effect can be expected considerably even if I sweat a lot though the use in the summer is in the future.
Satisfied with the effect and for Boots (Also for Wear) I also bought that one as well.
Products compared
It's not a direct comparison, but I was also thinking about buying a Dryer for Helmet to dry Helmet.
I found this product when I thought I couldn't buy it because of the hassle, the risk of failure, the cost of electricity and the price of the body, and I chose this product if there was any effect at all.
【Review】
It's definitely a product I'm glad I bought because I definitely felt the effects of just putting it in and putting it down.
It's also the best in terms of cost, as it's semi-permanent if you dry it in the sun.
View detail
Convenience.
The product is functional and good. I will use it for my SHOEI Jet helmet. View detail
Comfortable Helmet in Summer
I no longer have to dry my soaked helmet in the dryer at the lodge every summer touring.
The moisture absorption effect was good, and it was dry in the morning, (I do not know how long it took to dry)
As for the deodorant, I wash and replace the interior material every Touring, so I think the deodorant effect is also reasonable.
It's a little bulky, but I think I'll take it with me on my summer overnight touring.
View detail