Reviews
Full A-tech
Good design, good fittings, easy to clean due to long length.
Required Items for full SPL conversion
View detail
Full A-tech
Good design and good fitting.
Fixing is done with only two screws in the front, and a surface fastener is added in the back to increase the fixing force.
Required Items for full SPL conversion
View detail
Full SPL
Slit grooves purchased for A-tech full SPL are distorted and need to be modified. View detail
A-tech
Seat circumference requires hole expansion rather than Nut fixation View detail
Full Cowl
A-tech full SPL conversion, changed to Single Seat, fitting is a little worse, Pate molding, additional fiber to prevent cracks and reinforcement, quick fastener relocated holes and forcibly fixed. View detail
Full SPL
Well designed and well fitted, Brake line is fixed slightly higher than OEM View detail
Full SPL
Fitting is good, slight bending is acceptable, but be careful of paint cracking when tightening due to loose molding around screws, good design View detail
Full SPL
Purchased for A-tech full SPL conversion, the design around the tank is not very well defined and there is a gap around the fueling port when installed. View detail
It would have been great if Carbon's leaning had been controlled.
[How is it used?
Purchased for MORIWAKITitaniumTumbler.
Was the one you received as per Image?
There was a leaning of Carbon and unfortunately it was not as per Image.
(The manufacturer's note does mention leaning.)
How was your experience with it?
It is so rigid that it will not budge even if you try to break it by human power.
CoasterReverse side (Desk and surface to be installed) comes with Rubber's non-slip surface, so it will not slip.
[Points to note]
Naturally, the appearance varies considerably depending on the choice of twill weave, plain weave, or open weave.
Among them, it must be quite difficult to control the leaning of Carbon in open fiber.
If you are nervous, choose plain or twill weave.
View detail
Rigidity is low.
[How is it used?
It is used as a Tray for servicing.
Was the one you received as per Image?
I thought it was a rigid Tray but it is not rigid and cannot carry heavy objects.
[Points to note]
As mentioned above, rigidity is low.
At first I bought it thinking I could use it as a Tray to put food on.
It has low rigidity and can only be used for placing Bolt and other Parts at most.
after [Color] Clear paint, so it scratches easily and is normally noticeable.
How did it compare to other products?
The Coaster from the same manufacturer was so thick and rigid that it could not be shaken by human power, so we bought it thinking that this product would be the same.
It was a selfish disappointment on my part for not checking directly with Manufacturer.
[Opinions and requests to Manufacturer
Please develop a tray with high rigidity, even if it is heavier.
View detail
New ModelGSX1300R HAYABUSAMagical racingSide cover was used.
As I mentioned in my recent impressions, I thought the Carbon Side Cover was too thin and would burn my inner thighs. So, I decided to use it.
I talked to Dealer and he recommended 2Quantity with room to spare.:Set purchased. Impressions.
If you want to put it on the wrong side of the wall, or if you want to put it on the wrong side of the wall, you can use the 3Quantity.:It may be safe to Set.
The ride no longer feels hot, so there is a definite effect.
I'm not complaining, but I was only concerned about the slightly longer delivery time (about a week for me).
View detail
It is as good as expected.
Fit the Radiator exactly as shown in the photo.
I think it is quite decided.
It would be helpful if it is mentioned in the Instruction Manual.
View detail
It was worth the wait!
It took 5 months to deliver, but the quality and design are both excellent.
The equipment was made on 1Rank.
View detail
A-TECH Carbon Tank Cover Weave Twill for ZX-12R
The tank is the face of the motorcycle, and the carbon weave twill style, lightweight, gives the motorcycle a different look. The inside of the tank is covered with a rubber sheet to prevent adhesion and resonance.
The order was placed in December last year, and the product arrived at the end of June. After the arrival on July 30, I checked the actual product.
Despite the twists and turns, it does not bother me because the product is good. I think this product is just that good. I installed the tank pad that I bought the other day, and my motorcycle life is going to be more fun from tomorrow.
View detail
The Chain Cover part is squishy.
The delivery time took a large amount of time, and I was eagerly awaiting the arrival of the product.
The cover part at the top of the chain is so squishy that it makes me wonder if it is really sturdy enough to hold a large bag.
It looks good on the carbone, but it may be partly because of its design.
Personally, I regret a little that OEM would have been sufficient.
View detail
It's getting cooler.
It's aluminum, so it's easy enough not to cut your hands!
ImpactLarge and cool.
View detail
The construction is satisfactory.
It is used in the Circuit run.
As expected of an A-TECH product, the body is solidly built, and we do not feel any shortcomings even when using the circuit.
Even if the vehicle falls over, the Body will not crack unless the vehicle is struck by a vertical rotation.
It is that solid.
The U-shaped bracket that holds the Seat CowlRear side may break from the bent part, but it may not break so much in city driving.
Also, I don't think you have anything to worry about because Repair Parts will be provided immediately.
There is a Quick fastener lid on the Rear, and SeatRear could be used as an Accessory Case for city driving.
There are not many Other Brand Products for exterior parts for GS1200SS. (I know of only one other company that also offers Single Seat.) I think it is excellent from a Design standpoint.
I am using Circuit, so I have to modify some parts to match the vehicle specs, but I think fitting is no problem for a normal vehicle.
The only drawback is the slow delivery time due to made-to-order.
If you can tolerate that, it is a recommended Parts.
View detail
Very nice
Been on my zrx for many years... still looks excellent even after living in the Arizona sun .(minor imperfections now).. good UV clear coat.. View detail
UnderCurl
I was delighted when the item arrived in mid-July when it was due in November!
When I saw the item, I thought it was used.
Most of the corners were White with the paint peeling and Black paint.
View detail
It's okay.
good point
The shape is good, the parenthesis is good because it is Carbon, and the weight is not much different because it is Carbon, even though it is now Large.
A bad point
It's carbon, so it's gapped, but there are places where it's gapped almost to the point of a single hole.
[Color] Some areas of Black paint mixed in with Clear.
The delivery date is completely unreadable.
View detail