Reviews
Fits: HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA PCX150, HONDA PCX150, HONDA ADV150, HONDA ADV150, HONDA CBR900RR, HONDA CBR900RR
New Screw installation
Tool BoxFixing Screw was lost and not attached, so OEM ProductScrew was purchased and installed.
OEM Product's Screw, a bit expensive for 1 pc.
View detail
Fits: HONDA NSR250R, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP
exchange
The installed product was slightly deformed and rusted, so we purchased an OEM product for replacement since it seemed that we could purchase a new OEM product.
It is sold as a HondaOEM Product, which is helpful because I can replace it with a new one.
View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP
Replace with new one
I purchased this to replace the rubber and cracks in the Upper Cowl and Mirror mounting area that had deteriorated.
This is helpful because it can be replaced with a new one, which is also sold by OEM Product.
View detail
Fits: HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR500F H, HONDA CBR500F J, HONDA CBR500F K, HONDA CBR500F L
Replace with new one
The installed item was deformed and old, so it was replaced with a new one.
Spacer of resin, like anti-scratch, I think it's fine without, but installed anyway.
View detail
Fits: HONDA NSR250R, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP
Replace with new one
When replacing the Cowl fixed bolt with a new one, this Retainer was also replaced with a new one.
It is just a resin Spacer, but we are installing the OEM Product for now.
View detail
Fits: HONDA GL1800BD, HONDA GL1800B2, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800B, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800
Replace with new one
I purchased this product to replace the old cowl fixing nut with a new one because it was faded, discolored, and rusted.
It is sold as an OEM Product, so it is helpful to be able to exchange it for a new one.
View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA RVF400, HONDA RVF400, HONDA TMX125 M3, HONDA TMX125 M7, HONDA TMX125 M9, HONDA TMX155 3, HONDA TMX155 5, HONDA TMX155 7
Replace with new one
Rear cowlTail section fixed bolt is old and rusted?
This is a new purchase here for the replacement ball.
Since they are sold as OEM Parts, they can be purchased and replaced with new ones.
View detail
Fits: HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR
Replace with new one
The Cowl fixed bolt is getting old, so I bought this to replace it with a new one.
When I received the product, I found that the shape of the tightening ring had been changed to a -Minus shape? I am disappointed because I wanted the same +Plus shape as the one I am using now.
A description of the shape of the tightening section would be helpful.
View detail
Fits: HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA VFR750F
Cowl Fixed Bolt
I purchased this bolt because the Right SideCowl's detachable bolt had become old, but the tightening part had become -minus.
+I would have preferred something with +p Raster ips, but alas.
It is fine for fixing, but I wanted something in Plus shape.
Alternate part number:64508-ML7-010, I guess the shape is still Minus even though the part number has changed…
View detail
Fits: HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR1000F A, HONDA CBR1000F A, HONDA CBR1000F A, HONDA CBR1000F A, HONDA CBR1000F A, HONDA CBR1000F A, HONDA CBR1000F AC, HONDA CBR1000F AC, HONDA CBR1000F AC, HONDA CBR1000F AC, HONDA CBR1000F AC, HONDA CBR1000F AC
New installation
The Cushion on the Cowl fixed Bolt was getting old, so we bought a new one and replaced it along with the Bolt replacement.
It is helpful to be able to sell and purchase OEM Products.
View detail
Fits: HONDA NSR50R, HONDA NSR50R, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR
Not what I wanted.
I purchased this bolt because the Right SideCowl's detachable bolt had become old, but the tightening part had become -minus.
+I would have preferred something with +p Raster ips, but I am disappointed.
It is fine for fixing, but I wanted the same thing as the original OEM.
View detail
Fits: HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA VFR750R AC, HONDA VFR750R A, HONDA RVF750R A
New installation
I removed the screen for maintenance, but was not able to remove the installed items cleanly, and they were deformed and scratched, so I purchased new ones and installed them.
It is quite difficult to remove this pin and nut cleanly without scratches or deformation.
View detail
Fits: HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA PS250, HONDA PS250, HONDA ST1100P, HONDA CMX250C A, HONDA CMX250C A, HONDA CMX250C A, HONDA CMX250C A, HONDA CMX250C A, HONDA CMX250C A, HONDA CMX250C A, HONDA CMX250C A, HONDA CMX250C A
To new.
The screen was removed to remove maintenance and small scratches, but this nut was deformed and could not be removed cleanly, so a new one was purchased and installed.
It is easy to install, but quite difficult to remove.
View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP
losing something
I noticed that the Center cowl on the Right Side and the Fixing Screw in the Upper Cowl are gone, and it seemed to be available at HondaOEM, so I bought it. It is very helpful to be able to purchase it on the website without having to get a quote. View detail
Fits: KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200 DAEG
Reliable Quality
The gold Kawasaki Emblem is one of a kind and looks great. View detail
Fits: YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1
cowling part fit exactly my fz1 2008
This part fits perfectly the us fz-1 2008. moreover delivery was prompt and the part comes with allt he fittings ont it including even the fz-1 emblem, so yopu do not have to buy any paddings, any cable holders nor even the black plastic tringle that goes under the windshiled! View detail
Fits: HONDA C125, HONDA C125, HONDA C125, HONDA C125, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA C125, HONDA C125, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F
Poor installation of this fastener from the factory called for a replacement
When I was removing my rear chrome wheel fender for a detailed cleaning and to apply so corrosion prevention spray, I noticed one of the pan head allen screws was not fully seated and the rear fender was loose in this location. This turned out to be due to the screw being cross threaded from poor installation of this fastener from the factory. The threads for the fastener on the motorcycle frame were repaired with a thread tap to recut the threads but the original pan head screw was beyond repair and required a replacement to be ordered. OEM hardware replacements are affordable and available from Webike to order. View detail
Fits: HONDA C125, HONDA C125, HONDA C125, HONDA C125, HONDA C125, HONDA C125, HONDA C125, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA ADV150, HONDA ADV150, HONDA ADV150
Honda Monkey 125 headlight screw
This is the fastener you will need when you lose you Honda Monkey 125 headlight assembly screw. Happened to me and from what I read on the forum it sounds to be a common problem so when you have the time remove these screws holding your headlight assembly in and add a little thread locker compound to stop this happening to you. But if you do need a replacement these black coated steel screw are at least cheap to replace. Five stars for the product from Honda and five stars for the service from Webike. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1, YAMAHA R1
Yamaha OEM Cover 8
Original pad for Yamaha YZF R1. After the previous motorcycle owner, the frame pad was in poor condition, broken and soldered. But over time, I bought a motorcycle pad from you. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1, YAMAHA R1
Yamaha OEM Cover 7
Original pad for Yamaha YZF R1. After the previous motorcycle owner, the frame pad was in poor condition, broken and soldered. The cover was not original, the quality is poor. An overlay in the frame covers the wires. But over time, I bought a motorcycle pad from you. View detail