Reviews
It's really light, but..
It is light and strong, but if you don't tighten up the torque management, you'll get a lot of problems I think it will damage other components
I have tightened variously with iron, stainless steel, and aluminum, but when I choose a material, I think that I will be able to use it It is I'll choose carefully which parts to use and which parts not to use I don't use it for parts that are easy to lick, parts that can't be removed, and parts that can't be post-processed
Between this Titaniumium Bolt and the Titaniumium nut, you can get a tight fit It tightened comfortably, and I was impressed for the first time when I tightened the Bolt (and a mixture of discomfort and discomfort; Torque is sharp, light, but hard...) 。
A very beautiful exterior, Screw Mountain enchanted
View detail
Can be used to exchange rusty Bolt, but I recommend a person with Stainless bolt.
Bolt of Made in Thailand Motorcycle such as Grom or CBR 250 R is not good quality and Plating is deteriorated soon, it becomes unbearable. Bolt of Crankcase is particularly conspicuous.
I'd like to replace it with a new Bolt and I want to improve it, but the Bolt that I use is Bolt of the deformation whose Screw diameter is 6 mm and the head is 8 mm, so it is hard to obtain.
However, Bolt of this kind is released from DRC.
I used DRC 's Stainless bolt all the time, but it has a length of only 35 mm. As SteelBolt is available up to 45 mm, I bought it.
The Bolt received was Uni-chromeplating and the quality of plating seemed not good, some of which had already been altered. Using it as it is the same fate as OEMBolt. So polish it with Compound, replace it with Wax after rust stopper.
At the beginning Uni-chromeplating gets shine like Chromium Plating when it is like Blue but it will polish.
When brushing, attaching Bolt to the tip of Drill, it is overwhelmingly quicker than polishing by hand, but please watch out for injury.
When exchanged, Bolt that shines like Black Chrankcase like Chromium Plating is pretty nice.
However, unless occasional wax accident, it will rust soon just like an OEM.
People who do not have rust recommend the same DRC Stainless bolt.
The accuracy as Screw is higher than Stainless bolt. The direction of Stainless bolt is 0 from OEM. It is as thin as 1 mm, and it feels a bit stiff until it is tightened, but SteelBolt has an OEM ratio of 0. Since it is about 05 mm, there is little rattling feeling.
Because Bolt of 50 mm or more is also used for Crankcase, it is a pity that even if you buy Bolt of all length, you can not exchange all Bolt..
View detail
After all it is high
Things are good, but I can not deny the high feeling.
Also, the size of the Hexagonal Wrench against the Screw diameter is Small or Small I feel a shallow feeling.
So, it is unsuitable for places where Torque is applied firmly.
I feel texture is perfect for fixing Cowl in a visible place.
View detail
So so
I exchanged with Bolt of Chain Guide.
It is not bad as it looks tight, but the finish of Anodized is reasonable.
View detail
Fits: Others Size:M12
The surface is beautiful
Honest impression I was disappointed
When I first picked it up I thought that I am fluffy Bit Titanium
Look closely the part of Hexagonal (In the hole) There was a very finished coarse delivery until about 1 month and a half order ordered a lot of handling of processing? Even though I did not inspect?
Bolt of Beta titan is better than other Titanium Bolt. Finishing of this neighborhood is done normally
It is rough and quite disappointing than Titanium Bolt I bought at Yahoo auction!
Size which is not different is unavoidably purchased with β Titanium but from the next time I will look for another from the beginning
I can not help it by burning it with Burner and devoting it to use it
View detail
Surface finish is not good
Brembo caliper's consolidated Bolt purchased for replacement.
Since the surface finish is not good, I polished it with a water-resistance paper to make it a mirror finish.
I think that there is no problem in function.
View detail
Light, durable, rust free Titanium
For BREMBO Caliper 10 pcs before and after purchasing.
I have not mounted it yet, but it is light and good.
However, packing was disappointing.
It is not a cheap thing, so I want you to take care.
In fact, a large number of small scratches on the Taper portion.
I do not mind if I wear it, but I would like packaging to be improved.
View detail
1 pc 1 pc Instead of searching for yourself
When I wanted Accent and I was looking for Stainless bolt I got various things that my head became a Taper and color, but I bought this item with Cost performance.
Bolt itself had no problem at all.
But XJR 1300 did not have Bolt of Pulser Cover, 2 Quantity : 1pc. It is a subtle place whether it is dedicated or universal because it is supposed to be 23 of them.
View detail
Satisfaction as Titanium
Because I got on the GSX-R, Bolt of the front brake caliper rusted, when cleaning the Caliper and returning Bolt, I crushed the screw thread with Bolt's Rust scraps and turned pale. Fortunately I got a strange thing done by a Motorcycle store sending out screws. So, I changed it to this product. It is quite expensive, but it looks beautiful. Later, we will check at the next Caliper cleaning View detail
I just wanted Well nut
Purchased for installation of 848 EVO Screen. In OEM, you can not exchange Screen unless you shift or remove Upper Cowl, OEMWell nut is often torn, so purchase this set this time. Just use Well nut because Bolt is cheesy. Bolt purchased separately and used it. View detail
O-ring is ...
Mounting on YZ250F and Husq 's SM450R.
Although Husk was hard but could be installed easily, YZ person was muddy in Small Small in the hole of Air Screw or O - ring did not enter at all, painted oil and repeatedly TRY I did not enter after all but I removed the carburetor and cleaned it up. Separately this product is not bad But when using it for Motocrosser, let's do it after dropping mud dirt firmly
View detail
Never "Quantity : 1 Set of 4pcs. "It is not!
Evaluation seems to be able to write
I still can not make a photo, sorry - - -
Moreover, as for ZT 84-2302 SEROW 250
I bought it, but I can not see it "Quantity : 1 Set of 2pcs. "
is. To make no mistake (^. ^)y-.. o ○
I think that building is pretty good
Because the price will correspond accordingly, as for Bonsai Parts
It takes courage, but, well, Wow Bird! ^^;
View detail
There is no choice but to fade
I used it with Clamp fixed Bolt around Handlebar. I made it firmly because the making and precision are good, the strength is also quite good.
It's just Red, but every Manufacturer is the same, but I fade away. Since expensive ZETA will also fade Red, it can not be helped.
It is strictly prohibited to install it where heat is applied. Heat is also easily transmitted by Aluminum, and fever quickly when heat is added.
It is stronger than I expected and there is more strength than Chinese SteelBolt.
It is perfect for Dress-up and Accent.
View detail
Is it such a thing?
I bought it for installation in Chain case. Hue etc. As expected, it is not complaining, but when fastened with Box wrench, Anodized peels quickly, Aluminum Ground emerges. I wonder which Manufacturer is this, is not it because I do not know if you do not go nearby, so it is not a bad idea.
View detail
ΒTITANIUM Straight Cap BoltM 10 X 45
We used it as OEMRear brakeCaliper Bridge Bolt of ZZr 1400
Every Manufacturer purchased Length by measuring its own with poor setting of Rear
I have not tried it yet, but I am looking forward to the change as the suspension has become Titanium substantially
View detail
Aluminum only...
The company. I use it when the Screw hole part of M4 use part of the same color spreads out. There are no enemies to install and remove many times... Since the material is softer and will immediately color out, I think it would be nice if there were color variations at Stainless Steel. Because it is easy to scrape off or color off immediately even with just one tightening, care must be taken not to overload the Torque with the definite + Driver at the tip.
View detail
Not possible
Quantity for YZ 250 F and Husq 's SM 450 R : 2pc purchase.
Since Air Screw adjusts frequently according to the temperature, it is troublesome to turn Screw with a special driver each time, so I bought it.
YZ can be adjusted to Smooth because there is no Engine Starter Motor, but Husk has Engine Starter Motor under the carburetor so how do you think it is slightly subtle. I have not installed it yet.
A bad point :
The price is expensive. I think that it does not need such a thing personally though a figure or fine workmans is attached. I think that it would be enough if the mark or the line which Screw can turn by hand and become a standard to some extent is scraped. From other Manufacturer I would like you to issue a MODEL that has reduced more in cost.
Well, since it is a thing of hobby, it is Large thing in terms of added value (Lol)
View detail
It was a defective item
It seemed that luck was bad and 1 pc thread of 1 out of 4 was collapsed and could not be used.
I could not wait for replacement so I bought additional.
The shape itself is very good and COSPA is also good
We recommend you to check first when purchased.
View detail
Company superfootrest (ブラック) To install.
The company's Super footrest (Black) Purchase to install.
Screw attached to Super footrest is Stainless Steel (Silver) So, I do not want to make it stand out so I bought Black of the same color as Super footrest.
I think there is a discoloration because it is a footpeg part. (It's good not to rust... ) It would be nice if there was a thing of Stainless Steel's Black Plating, but KITACO would give out of it at the moment.
When the Step Board's ScrewScrew hole is stupid "M5" Of Screw (Black) Also purchased at the same time. As I think that it fade quickly, "Three stars" is.
View detail
Not to rust Unexpectedly None!
It is completely inconspicuous!
I bought this set for not rusting.
Since there is no Instruction Manual, I do not know how far Exchange is supposed with this Set.
I properly exchanged one pc at a time, but the length of Bolt does not match and Bolt has surplus.
View detail