Reviews
Ideal for Accessory Case!
I bought to put Bike Cover out.
Quality is also very well very satisfied than I thought.
It is a very recommendation because it comes in as normal as a thin Cover or Rain jacket!
View detail
I tried to attach another one
I installed only One Side the other day, but the capacity is still 3. 5 L is not enough.
I bought another one again.
But One Side had a bit of a hard time, but when I become one more, I will do everything once from Rose Case.
Although it took a hard time by trial and error it took more than 2 hours but I could install it.
I wrote Impre the other day so I will write it as a little helpful.
The method
1. First I did not use Band from the beginning, I used the Band I purchased the other day.
2. Thread the Band through the hole through the Tool Box.
3. Band dunk below Tandem seat and put it through the hole of the Tool Box again (Second time) Fix it
4. In my case I was a little long as it was a long time (2m) I think that it is a little short
5. Lastly, since the Tool Box hits Rear Fender, I protected it so that it will not be hurt by Cushion.
I think that it is impossible to move a little by force, so I tried installing it so that it can move slightly.
View detail
Size sense and design is good
I found it if I was looking for a little Large textile bag.
Size feeling is just right.
I like shades, but when I use it every day for about half a year I fade in color as well.
So it is painting once.
It is strong and I am using it for over a year but there is no problem at all.
View detail
Bag itself is exactly good
I purchased this American Type Motorcycle for the first time.
I had it until now (PCX) Rear trunk was not attached and it was troubled without any loading ability
I do not want to attach too much Side bag, I found this item that I am looking for and can also use this Tool Bag & Side bag and bought it.
Just did not install Band and I searched for installation Band, somehow managed to install today.
Easy to Implease
1. First of all, it is 3. The capacity is 5 L and Small, but if it is a Small one (Rain gear etc) It is enough to enter.
2. Bagle (Stopper gold tool is) Although it can be tightened tightly, although it takes some trouble to take out
3. To install, tighten the commercially available tightening band through the bottom of the Tandem seat.
It was surprisingly securely attached.
4. Although the upper part is certain but the lower part I want to see how the parts still remain because there is little movement at the moment
Although it is simple more than that, I told you the feeling that I installed, but I put rain gear and gloves when I stopped for the time being.
After that I do not know how it feels like rainy day, so I think I will make Cover.
View detail
It looks good
It looks nice, but you should not expect storage. It is easy to install, but it is Minus evaluation that it makes it da RAN without fixing it. However, Parenthesis is good. View detail
Just right Size
It is named Tool Bag but I purchased it for use as ETC Body + α's Accessory Case, installed in the Grab Bar.
Although loading capacity and Large Kimono are as you see, they do not get in the way and I do not have a presence like Side bag, so I think that it is just right for everyday use.
The price is also reasonable, thick and sewing is also solid, and even as a tool holder, COSPA is enough.
I just bought it and it was hard to open and close, but I wonder if it will become familiar within that?
Because of Separate handle, there are few Attachment attachment areas around Handlebar, I was worried about the installation position of USB charging port, but I'm thinking of putting it here.
Whether the Band fixation is not relaxed by vibration or not is checked but as with others it is fixed with Tie Wrap anything.
View detail
Excellent! I am very glad!
The bag is very high quality! Waterproof! I have it handled by impregnation! I liked castles, very quickly discover! Especially I do a lot of photos! Mounts on a motorcycle is also very strong and high quality! One small minus for me to repeat this is only my opinion little rivets and other biker pieces. But it is also a plus at the same time, because I bought them separately and when fixed will be installed on the motorcycle! Many thanks! Excellent shop! I will only buy here and recommend it to everybody! View detail
Fuu!
This bag housewife instead for bikers !!! You can put about 10 kg of potatoes or 7 kg of onions, it is very convenient and necessary for the bag housekeeper, housewife, wife! But it is not for the rocker! Build quality is excellent, no complaints here! I will not install it on your bike and do not recommend to a friend! View detail
Smaller than expected
3. It's 5L capacity, but I still do not leave the Tool Bag area
Rain gear is about to enter Limit
However, considering the price can be said to be good products
There is not much insistence on appearance, Parenthesis is good
View detail
Again leather is different
I used a synthetic leather tool Bag so far, but aged deterioration (?) Because the form collapsed with, I bought DEGNER's Tool Bag.
Truly genuine leather. Both shape and texture are Large satisfied.
Because I chose a wider width so that the tool bag I had possessed as it is, I was worried whether it would make me feel heavy if I put it under Headlight, but I do not feel any discomfort.
Since the attached genuine leather Belt is longer than other companies, it was able to be installed without problems.
View detail
Satisfied with solid making
I wanted a Tool Bag and studied variously, I tried to purchase because I was able to convince most of the contents of Impre and the price most.
I installed it in the Sissy bar instead of Front fork, Large is not too big Large It's too small It looks just good.
Since there is a Side bag, Tool Bag wears fashion sensibly rather than practicality, VIRAGO thinks that it is recommended to install various Bags in order to produce a sense of volume since the body is small.
This time I attached it to the Sissy bar but due to the shape of the bar I used Belt and Tie Wrap because I could not tightly tighten it with the attached Belt.
With this I stayed Firmly so it does not seem to be moving.
I also have a solid foundation and the price is not that expensive so I think it is reasonable, Orange's Stitch is also a good Accent.
View detail
Is it easy to loosen? - - -
I installed it on Front fender.
Installation Belt tightly caught
It seems easy to loosen so reinforcement may be necessary.
I'm updating again because I have not run since installing it yet.
View detail
APE 50 attached to FI type D
APE's Front fender is installed after it is down. I purchased Rain jacket and I wanted to insert a tool. I thought that it was good to purchase because the texture of Bag was also good and Large Kimono was just right. We will Recommendation! View detail
To Swingarm.
BOLT Shoulder Bag's body Left Side was lonely so I tried installing it on Left SideSwingarm. In the attached Band, the tightening is loose and it is dangerous that it falls under the BeltGuard on the lower side, so between the BagBody and Swingarm, cut a 2 mm thick Rubber board to the appropriate Large size and paste it with Double - sided Tape and Tie Wrap 4 I tightened it tightly and fixed it.
While instant Puncture repair agent is put in it, it shakes up and down with vibration during running so that the BagCenter part was shrunk with a thin Belt of 100 yen uniform, became a shake.
Originally it is not a thing to install in such a place, but I am satisfied personally.
View detail
KTC Tool Box?
I was looking for a sturdy and affordable thing to put the on-board tool.
I purchased it because it was drawn by Brand and KTC called KTC
Both making and performance are the highest peaks
This price, performance, we will Recommendation by KTC
View detail
Quite a capacity.
I installed it in Made by HURRICANE Backrest of BOLT Shoulder Bag.
Installation of Pad of Backrest Since Belt attached to the Bracket part seems unreliable, we did not use it and it was just fixed with a good feeling with 5 mm wide Tie Wrap.
As a Tool Bag, there is a space that is big enough to accommodate Small objects such as Touring mapple and Gloves and Size as much capacity. If only Mapple is thick, will 5 or 6 volumes enter?.
It seems to be durable to make with this size, so the price is also affordable so I'd recommend it to those looking for Large eyes Tool Bag.
View detail
Good feeling
There was a lot of space for Short rear fender in Single Seat There was feeling a bit stupid, so buy it to hide. Paste Magic tape to make it easy to desorb. Remove when picking up and attach it during touring. But at break etc etc. I will be able to park if I do not carry it.
View detail
I am satisfied enough.
(1) On the whole, making is sure..
(2) Because it is a stiff fabric, it is painful to hurt, stretch and tear, even if you put a lot of heavy tools, there is no worry.
(3) Because it is a thick fabric, I think that tools in Bag will not hurt outside things.
(4) Since it can be stopped with a long Magic tape after folding, you can store a lot.
(5) A thin Pocket that puts Spanner and others is also made tight, so even if you turn it upside down, the tool you put is not falling down.
(6) This price is enough if it is this price.
View detail
Somewhat contrivance is necessary for fixing method
Although the attachment method to the car body uses the attached Strap, it may be a bit difficult to fasten firmly and fix it firmly only with Strap. I fixed it with Tie Wrap.
If the opening and closing of the lid is One Touch Buckle, it will be more comfortable for everyday use but I think that it is a fixed gold tool which also doubles as design, so I think this is fine.
The overall design also matches SR well.
View detail
A solid Tool Bag
【What made you decide the purchase?】
In preparation for the Trouble at the destination, I purchased it because I wanted to install a tool in Motorcycle.
The deciding factor of purchase,
- KTCBrand
- What was a popular item
- Size feeling seems to be just right
- Durability of the fabric seems to be good
Etc.
【How was it actually used?】
(capacity)
A fair amount of tools are included.
From Left of image in order
- Radio pliers
- MONKEY Wrench
- Pliers
- Nipper
- Ratchet Handlebar
- Double-end Wrench(8 - 10 mm, 10 - 12mm)
- Socket(Hex bit3 - 4 - 5 - 6 mm, hexagon 8 - 10 - 12mm)
- Needle gold
- Gum Tape
- Ratchet driver
- Air gauge
- Scissors
- (It is not shown.) Spare Plug X 4
I will enter this much.
I think that you can cope well with Trouble which tends to occur on the road.
(Size - weight)
Size of the image with the tool put in,
Approximately 27 cm in width, 13 cm in length, 11 cm in thickness, weighs about 3 kg.
It is quite Large and has weight, so it is difficult to put it under Seat. I am putting it in Tank Bag.
(Portability)
Since there is no possession, inserting many tools is difficult and hard to hold.
So I sewed Magic tape sewn on Nylon strip like image, passed through Belt of Tool Bag and made hand of Original.
[Is there anything I was disappointed about?]
Because there is no gore, things that are too thick are not included.
For example, because the gum Tape of the image did not enter Pocket if it was intact, it was thinly crushed and bound with a needle gold.
Tool Space is the feeling that the Grip part of the image's Pliers will enter Limit.
【Hope for Manufacturer - Please let me know if you have any improvement points]
- I want a gusset on Pocket.
- It is more convenient to attach a hand like a picture.
【Have you compared items?】
- TRUSCO Tool roll
Etc
Not limited to the above, since the roll type Tool Bag is mostly of the Small Type, this product of Large Size was attractive.
[Others]
Pocket for Socket is attached, but please note that when inserting a thin tip socket such as 3 mm Hex bit from the tip, it pierces through the fabric and opens a hole.
View detail