Reviews
Installed on GIVIRear boxE26N!
I was looking for one that would fit for my GIVI 26L.
Align it with the R, position it, drill the holes, and install!
Feels a little firm, no discomfort at all!
View detail
Standard Parts for American motorcycle
I compared it with the Backrest of OEMOption, but the Pipe is thick and firm, and I chose here that the body can be supported by the Pipe that extended to the SIDE as the Pillion Bar.
The people who rode in the Rear gave it a good rating for safety and it held the luggage securely in place.
I'm happy with my dress-up as American motorcycle style!
View detail
To reduce fatigue during long touring
[How is it used?
To support the waist when touring
Was the one you received as per Image?
Street Image
Was the installation difficult?
Seat needs to be removed.
It is difficult to remove the connector of Harness, but it can be installed without removing it at worst.
How was your experience with it?
Although the motorcycle is easy to position, fatigue can still build up when touring long distances.
In particular, just having support for the waist makes a big difference.
I think a Highway board would make it even more comfortable.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
expensive
Other items that would be helpful
The instruction manual can be downloaded because QR code is written in the paper bundled.
The work is smoother if it is installed after a small assembly beforehand.
It can also be used as a temporary place to store a helmet (maybe because it's a Jet helmet).
View detail
The original Honda rear backrest can be installed to make up for the inconvenience of the factory without a backrest
Honda's original rear backrest is suitable for Rebel 250/500 models. After installation, it can make up for the inconvenience of no rear backrest at the factory. It provides a sense of safety for the rear seat passengers and can be installed with the rear shelf. It can be used to load motorcycles. Traveling luggage greatly increases the convenience of traveling! However, the position of the backrest is a bit low, which is not suitable for the function of the backrest! ----------------------- ----------------------- Honda (Honda) applied to the original backrest Rebel 250/500 models, the installation can not make up the backrest inconvenience factory, provides security for the rear seat passenger can be installed with the rear shelf, a motorcycle can be used to load luggage travel greatly increase the convenience of travel! position back but a little bit less in line with the function of the low back! Powered by Google Translator View detail
Easier to handle
Because there is a kind handling Instruction Manual.
You do not need to be a PRO to work with it.
Depending on how you do it, you can do it without shifting the Fender as per the Instruction Manual.
It would have been 120 points if the included Bolt was Stainless Steel.
View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX HYBRID, HONDA PCX150, HONDA PCX160
Top!
Very good product, the backrest alone without the reinforcement bar gives a more refined look than with this one, very good quality like almost all Takegawa products, the foam is comfortable, the binding is well designed, provide a wick of 18 for drilling the two backsplash mounting screws. I highly recommend this product for anyone who rides two people. ---------------------------------------------- Very good product, the only file without the reinforcing bar allows to have a more clean look that with this one, very good as almost all product Takegawa, the foam is comfortable, fixation is well designed, provide a wick 18 for drilling two screw fasteners backsplash. recommend this product for anyone who runs two. Powered by Google Translator View detail
rebel backrest
This product fits well with the shelf and is very beautiful after installation. It will greatly improve the sense of safety when riding in the back seat. The installation is also very simple, and you can quickly get it done by yourself. I have searched for a lot of products before, but I have not found a product that I think is more satisfactory. This is my favorite at present, the workmanship is also very exquisite, and overall it is great. I recommend everyone to buy it. ---------------------------------------------- The products and shelves are a good fit, the installation is very beautiful, take the back seat will greatly enhance the sense of security, installation is also very simple, do it yourself can quickly get. Before looking for a lot of products, find they think has not been satisfied with the goods, this is the current favorite, workmanship is very fine, very good in general, we recommend purchase. Powered by Google Translator View detail
Installation is very simple
Installing HURRICANE is very simple, you can install it with simple tools. I bought it to change the comfort of the back seat passengers. What people like to say is, is the backrest too high? Only 1 inch is the same thickness as the handle. Black painted with gloss also has a texture. The only disappointment is that the adhesive used to secure the rod end cap is easily removed. So I fixed it with a strong soft glue. Because it is to install the tool bag, I did not stick the rest pad on the car body like the picture. I find it difficult to stick it on the car body because this rod is single, but compared with other manufacturers’ products, it is both practical and practical. Cheap. Therefore, it is recommended to those who are considering buying a backrest. So if you think of it as a design, your preferences may be different. But because it supports the waist, you can lean on it comfortably, the ride comfort is outstanding, and the assembly accuracy is very good. ---------------------------------------------- HURRICANE installation is very simple and requires only simple tools you can install it. I bought it in order to change the comfort of rear seat passengers, most people like to say is that the back is not too high? Only one inch thickness of the same, as a handle . Black painted luster texture. The only disappointment that the adhesive when the fixation rod end cap can easily be removed. So I used a strong soft it fixed up. Because in order to install the tool kit, so I did not like the picture, like the rest pad attached to the car body, I find it hard to stick to the vehicle body, because this is a single pole, but compared to other manufacturers of products, it that is practical and cheap. It is recommended to those in need who are considering buying back. So if you see it as designed, your preferences may be different. But because it supports the waist, you can be very comfortable against the above, outstanding ride comfort, assembly ac curacy is very good. Powered by Google Translator View detail
Decent product
In all, good quality and no problems with fitting and chrome. Welding somewhat coarse, maybe Tig instead of chosen method. View detail
Backrest
[How is it used?
installed
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It was easy
How was your experience with it?
It looks better and my passengers feel more comfortable riding with me.
[Included Parts:were they on?
Only Screw to attach the Cushion in the back was attached.
The Body device is attached with a pure Normal Thread Screw.
[Was there anything that disappointed you?
None
View detail
The peace of mind of an OEM
It feels luxurious and rigid.
I compared it to other companies' products, but chose the Y's Gear product because it was made by Pipe and felt cheap.
The price seems quite overpriced, but as only an OEM can do, it feels safe and satisfying.
I feel that a little more angle would allow for a more relaxed two-seater.
View detail
I'm glad that the response was very fast.
The Backrest was even better than I expected. Probably a Made in USA OEM product, behind the BackSeat. "KAWASAKI" I also liked the inclusion of the Logo of View detail
![Sissy bar [Low]](https://img.webike-cdn.net/catalogue/images/77721/H522-4049_01_TS.jpg)
I don't know what to do.
I will say this after knowing that there are not many Parts because they are originally rare car Parts.
At first, I ordered the Black one, but when Manufacturer didn't have it in stock, it was cancelled.
I will then order Silver and the shipment will be shipped after November 24.
They asked me to cancel it or wait for a reply.
The next day after I replied that I would wait, I received an email from the Manufacturer stating that they were out of stock and would cancel the order.
So what was the text message from a day ago?
HP. The "NEW It is still listed as such. Lack of control.
I will never buy here again as they are very unresponsive.
View detail
Fits: Others B47, KAWASAKI VERSYS-X 250, Others B37
Focus on appearance
I don't normally do Tandem, but I personally think it will improve the look, so I bought it. I didn't have an electric drill, so I wasn't sure how to drill the Case, but I was able to drill a preliminary hole with the Drill and then pry it out with thin Scissors. I am very happy with the look and feel of the case. View detail
Fits: Others B47, KAWASAKI VERSYS-X 250, Others B37
For Tandem
We rather often do Tandem as a couple, but GIVI's B47 hurts where the back hits, so we bought a Backrest in preparation for long touring.
You need to drill holes for mounting, and I'm concerned about water immersion, but it also included RubberWasher, so I wonder if it's Large sturdy.
The inside of the B47 is positioned to be drilled, so it's not a problem if you drill a 6.5mm hole as per the Construction Manual for easy installation.
The Cushion is also softer than I expected, so they said the comfort during tandem has increased.
View detail
It keeps you in a comfortable position!
As per the installation instructions, I noticed when I removed the rear cargo bed and fixed the base and installed the rear box, when I opened the lid of the rear box, the base of this product was hindered.
That's why I made a hole in the RearBOX directly only the Cushion part and fixed it with Screw stopper as shown in the picture. I used to ride on the RearBOX by leaning directly on it, but I had a problem that the RearBOX hit my back when I passed the bumps, which was painful. However, the problem was solved by installing this and comfortable position can be taken. It's not the same as the original image, but I'm glad I bought it!
View detail
Fits: SUZUKI BOULEVARD C90, SUZUKI INTRUDER C1500, SUZUKI VL1500 INTRUDER LC, SUZUKI BOULEVARD C90, SUZUKI INTRUDER C1500, SUZUKI VL1500 INTRUDER LC
It's solid
I was a bit flabbergasted until I purchased it, wondering if it would be in stock or not, but it's a good product. I don't actually use it for anyone to sit on it, but it's very convenient for temporary storage of Helmet and other things.
It's not so difficult to install and anyone can do it, so even if you're not very good at customization, it's still very durable.
View detail
I recommend it as a Backrest.
I'm 170cm, 58kg, normal build, but it's just right for me personally. However, those with a good build may feel a bit tighter.
Installation of this product is to insert the seat into the rear suspension part. It may interfere with the Rear Suspension part of the Carrier which is already using the Rear Suspension part.
I was able to use it together with the Tandem Backrest for CROSS CUB of Wills WIN, which is like removing the Spacer from the rear suspension.
By the way, I received my own screw with the pad part temporarily fastened. You can buy more screws at the home center, but it's too dangerous and I wanted to send them separately.
View detail
Nice shape!
Backrest.
Good shape
Safe Brand:GIVE
Highly Universal
I arrived at this product after searching under the following conditions
The texture is high, and after installation it looks like a cab rear box on a top ranking It is.
The feel is normal.
View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA YZF-R3, YAMAHA MT-07, YAMAHA YZF-R25, YAMAHA MT-03, YAMAHA XMAX
To the Top case of 30L
This product is designed for the EUROYamahaTop Case 39L, but can be used for the 30L I did
The fit is surprisingly good as shown in the photos
Quantity at the bottom:Pair (for Left and Right) is shaved off because it interferes a little bit
Installation to 30L is a little odd
It is necessary to drill a hole in the Case to fix the Screw, but there is no mark to indicate the position of the hole drilling It is very difficult to determine
The quality is good, but the price seems a bit high
View detail