Reviews
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-6R
I installed it for another car model.
I installed the ZX-12R with the Handlebar Up Type in TouringSpec. The mounting hole was made a long hole and the point where it contacts Napoleon-on-Mirror was shaved off. At first, the front camera was fixed under the ram air duct, but it felt uncomfortable, so we purchased a different model this time with the assumption that it would be modified. The size of the bracket is too large to be noticeable, but I personally like the design. The camera is made in China, so the camera mounting holes were also modified.
Well, it's like Parenthesis is good (laughs), it's self-satisfying.
View detail
Rigidity is high and functionality is fine. Resin texture is a little poor and has a lot of BALI.
[How is it used?
CameraMount for Smartphone and Circuit driving.
Was the installation difficult?
It is not difficult, but it is a little unfriendly because it arrives in RoseRose without any Instruction Manual or anything. American in that area.
How was your experience with it?
The rigidity is high, and as long as you use a well-fitted ball joint, there is no rattle or wobble at all.
The surface finish of the resin is rough and there are still some BALI and cut marks from the manufacturing process. I was concerned about it, so I used File to break it in. I feel American in this area as well.
[Included Parts:were they on?
All included.
No Instruction Manual.
[Was there anything that disappointed you?
Roughness of resin surface finish.
Point and hang of installation
If the ball diameter is not a good fit, it will wobble.
Some similar looking products may or may not be Ram Mount compatible, so it is best to check for compatibility when purchasing.
View detail
How about the fact that the Microphone is built into the body?
Purchased because it is the latest MODEL.
I have been using it for about a year and the operation itself is fine.
I enjoy checking videos on my PC using a dedicated application.
However, only the Engine sound is recorded as audio.
Since the Microphone is built into the Body, external sound is drowned out by the Engine sound near the Body, rendering it completely useless.
It will not be possible to record without exposing the Microphone portion (i.e., part of the Body) from the Motorcycle, even if it is not near the Engine.
Microphone can be built into the REMOTE CONTROLLER or completely separate.
Also, I am not surprised that the Camera is not a STARVIS Type, considering the timing of its release.
I try not to drive at night as much as possible because I am a motorcyclist, but I would like to have a camera to monitor parking.
Based on the above, we believe that this product is worthy of comparison with other companies' MODELs.
Finally, it is Good that MistubaBrand's SDCard is on the market.
If the memory is a fake brand product with a short life span, it would be a disaster, even though it is a DriveRecorder for emergencies.
View detail
Insurance.
The logic of the traffic laws is almost impenetrable to the lady who drives with her phone in her hand or the lady who acts rashly for a parking space! 。 Motorcycle is insured by Motorcycle, but we feel it is necessary to insure against the other party's attorneys underpricing us by less than half! 。 You can suck video data via Bluetooth, but it is much faster to read directly from MicroSD. 。 Therefore, what direct extraction is performed, but the MicroSD is Pssst! and would pop out, so I fell into the body of the car and drank a tear! 。 Towel to prevent falling will also prevent the re-purchase of a $2,000 Card! 。 The only problematic part of the installation is the extraction of the Main power supply. 。 From the bus bar "Co-rolling." The first step is to take it out and solder it up with a It is sure to wrap it with vinyl tape. 。 If you are not confident, it would be better to ask someone who is familiar with electrical work to do a single Juice w 。 Images can be used without problems, but one's voice is also recorded, so those who drive while angry need to be a little careful. View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR, HONDA CG125, HONDA SUPER CUB, YAMAHA XSR700, YAMAHA MAJESTYS, YAMAHA Tricity155, YAMAHA BirdCity, KAWASAKI BALIUS250, SUZUKI ADDRESSV125, HONDA CROSS CUB, HONDA CBR250RR
Easy installation
I'm happy with the Refreshing because the Tough one doesn't fit around the handlebar of the MOTARD. View detail
Products that you can't understand anything about without your phone.
Body is a strange product, as it does not show anything except the LED of the power supply, so the buttons on the Body have no meaning at all.
I don't even know if it's being filmed unless it's linked to my phone.
Wiring is very simple
Wiring is easier, including safety, through separate power supply parts.
Power can also be drawn from USB without using separate power supply parts, so power can be drawn from a mobile battery or USB port.
Front and rear cameras have a reasonably wide field of view and 1080p image quality. (Progress is the Large thing) and an FPS that is compatible with LED signals, so there is a sense of security.
However, there is no denying the problem that the wifi linkage between the Body and the smartphone does not connect immediately, so it is necessary to check the connection several times.
Time lag when switching between front and rear cameras is also a concern. (Only when checking the screen with a smartphone)
Excellent in that the images are quite beautiful not only during the daytime but also at night.
The LensF value is set much brighter and the gain is also increased by 2 to 4.
Since the Lens is large enough to be noticeable and may create aerodynamic drag depending on the location, it must be verified at the time of installation.
It would be best if the front camera could be installed in the Wind Screen or in the front light CoverLens, etc., if possible. (Note, however, that the heat is likely to ruin them if they are not LED lights.)
It's frustrating that even if the wifi settings on the phone are set to reconnect when it's linked to the phone again, for some reason it doesn't connect properly.
Zingle when energized (sound) You can check the startup with
The rest is durability, but I can't say for sure since this just came out.
It is time-consuming to download the shooting data from the body to the smartphone via wifi every time.
However, if you want to pull the microSDCard out of the Body and check it on the PC, you don't have to do that.
The body position may be difficult depending on the type of car, but the thinness of the body may not be a problem, but on the KLX230S, the installation location was quite limited, so some modification near the battery was necessary.
View detail
Quality!
No complaints. Can be used in a variety of ways.
Radar on Right and Smartphone Navigation on Left are Quantities:Set
View detail
New car installation
Control switch of JupiterNavigation, which is frequently used, is installed on the Left Side.
DAYTONA DAYTONA:DriveRecorder-Control switch with MirrorM10Clamp installed on the Right Side.
View detail
OGK I put it on EXCEED.
B+COM Sorry.
OGK for summer Dislike BoomMicrophone for EXCEEDHelmet's Income and B+COM B-COM:WireMicrophoneHolder is now available and used for SENA20S
The Double-sided Tape on the Mounting Adapter seemed weak.
View detail
For RearCamera, a driverless camera
I was looking for one for my RearCamera for my DoraRecco and found it.
I am very satisfied with the large size of the product, which is securely fastened to the Fixing Screw of the License Plate without any fear of falling off.
View detail
Dora Reco for Front
I was looking for a place to mount the FrontCamera for the DRA recorder and was looking for some related parts and I found this.
I think the price is a little high, but I am satisfied.
View detail
![[Optional Accessories for DDR-S100 Drive Recorder] Wind Noise Reduction Filter [Drive Recorder]](https://img.webike-cdn.net/catalogue/images/53531/98783_TS.jpg)
It's worth a try
When we replayed the first video from the DVR, we could not hear anything but the terrible Wind Cutting sound.
I was looking for an Option product at that time and happened to find it and bought it.
When we tried it, the Wind Cutting sound was considerably suppressed and the Engine sound could be heard on the Level, and we were fairly satisfied.
Try it and see.
(Can't we at least include this in the package?)
View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, SUZUKI GS125, KAWASAKI VulcanS, HONDA Rebel300, YAMAHA NMAX155, SUZUKI BURGMAN200, HONDA REBEL250, HONDA SUPER CUBC125
An essential companion for RAM Mount
[How is it used?
Now in use on a commuting motorcycle, clipped into a Mirror mount.
Was the one you received as per Image?
Included Parts:Included, as per product page
How was your experience with it?
The paint on the product was smooth, with no errors depending on the location. The large size of the hole was as indicated and no modification was required.
[Points to note]
When the last fixation is done, it may turn around, so it must be held down.
How did it compare to other products?
No comparison products
View detail
The picture is good, but …
I chose one that would project properly.
But the connection to the app is slow and Response is bad.
Also, for some reason I can't set my watch.
That messed up the time.
So far it has not been easy to use.
I just need to be in the picture in case of…
View detail
For installation of Smartphone Holder
I bought the Short Type to keep it out of the way on my SSMotorcycle.
It is quintessential made in USA.
Even I, a clumsy person, can easily install it.
It is very useful
View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, SUZUKI GS125, KAWASAKI VulcanS, HONDA Rebel300, YAMAHA NMAX155, SUZUKI BURGMAN200, HONDA REBEL250, HONDA SUPER CUBC125
Perfect maintenance of leather products with just this one product.
[How is it used?
We use it for all kinds of leather goods. (Connections, Gloves, Jackets)
Was the one you received as per Image?
It came exactly as described on the product Page.
How was your experience with it?
I soaked it in the provided Towel and rubbed it lightly, but it soaked in without discoloration. The black colored areas looked more luxurious with a black shine when I checked them after wiping them. The nourishing ingredients in this product are also expected to extend the life of leather products.
[Points to note]
It can be difficult to tell if you have unfinished work, so please work on it so that you do not forget where you have done it.
How did it compare to other products?
It is really easy to do everything with just one of these.
Since there are many places to wipe up the joints etc., it is helpful to spread them out in the second half of the process with Spray.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Can be used for Ram Mount, etc.
Purchased for installation of Smartphone Holder for GB350.
There were three different lengths of Bolt, so there was plenty of security.
View detail
Adjustable to change to a position that is easy to see
I purchased this with Mount.
With ShortMount, the sun sometimes makes it difficult to see, so I put on this adjustable product.
It is convenient because it can be used in various ways, such as close to the hand or avoiding interference areas.
However, the RAM Mount is One set with three purchases, so the cosmetics may not be that good.
We will see how the quality is as we are just starting to use it.
View detail
Initially, I was satisfied with the Large change, but it broke down after a little over a year.
[How is it used?
Installed on Ninja 1000SX, touring only once or twice a month
Was the one you received as per Image?
Body is a little too large.
Was the installation difficult?
It was not difficult because I referred to other people's social networking sites, but rather the position of the FrontCamera and the removal of the Cowl were troublesome.
How was your experience with it?
Initially, it was recorded properly.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
After a little over a year, the Indicator Lamp on my RearCamera has started to blink. I looked at the error Q&A, but all it said was to reconnect the Cable, but even if I tried that, it didn't work. I hope it will last at least 3 years.
View detail
I've been reading a lot about motorcycle accidents lately.
Motorcycle is also required to have a drarecorder.
And it comes with front and rear Camera.
We live in such an incomprehensible time.
You cannot run without a drareco.
Of course, it's for your own protection.
The body is placed under the ETC of the Tandem seat.
The images are very clear and the application is easy to use.
View detail