Reviews
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400
Drareco pedestal
Designed to fit the car model, Bolt On and installation is complete!
However, since the Front is matched to OEMMirror, it was replaced with ThirdParty product, so a little ingenuity was required for Camera installation.
View detail
Be prepared for anything.
[How is it used?
I installed it about a year ago because I didn't know what would happen.
Was the one you received as per Image?
The body is larger than expected and the wiring is thicker than expected, so it may be difficult to install depending on the type of car.
How was your experience with it?
I am satisfied with the Beauty of the image. Battery seems to go up because it takes a long time to upload to the app.
[Points to note]
In my case, I mounted it on top of the Front Fender, but when the Fork sinks, the Camera hits it.
How did it compare to other products?
Relatively Compact and seems to perform well?
Other items that would be helpful
Items to buy together
Number Bracket
View detail
Impeccable product!
GunGun tightened without cracking or chipping, and it doesn't even shake when dropped on the ground! It's just tough!
You won't find a better mount than this! It's a RECOMMENDATION!
View detail
Great build! Sturdy!!!!!!! But you have to get your own Rubber or you will Gap!!!!
As the title says. The build quality is great, but you have to prepare the rubber yourself (it deteriorates over time and must be replaced every year).
Gap falls off fast if you don't wrap it lol I wish it came with Rubber… The build quality is great!
View detail
A little too high.
It is an OEM Product, so it is perfect, but not cosmetically pleasing.
The paint job is also not good.
View detail
Note the size
Tail lamp was in the way and could not be attached. Please consider carefully before you buy. 1.5cm height plus Camera is needed on the Number. View detail
SizeSmallest
I installed the bolt on the front fork, which is supposed to support up to 54mm, but I think it is difficult to use the supplied bolt. I prepared a longer bolt and managed to install it by bending the receiving part. The quality is not good for the price, and the paint is also scratched.
It will probably rust after a while.
View detail
Thickness of the plate and good paint job
I installed it on my CRM250AR. Fitting is perfect. View detail
hmm
I guess it can't be helped because it is a combination product, but the pitch of the Bolt where the Number is mounted does not match. Also, in the case of ZX12R, depending on the angle of the Fender Eliminator, the camera mounting part may hit the rear cowl and there will be no space for the camera to be mounted. I had to cut here and there, so I painted it. View detail
I thought it was made in Japan, but it was CHINA.
I have owned 3 motorcycles and just bought a new 250 Motorcycle, so I decided to go with Mistuba! (Large type and 400 medium size are made by Aquillo) I didn't look at the box carefully, so I looked at the unit after installation and saw that it was made by Inch China. It was a bit shocking, but it is a JapanBrand and I think the quality is good. First of all, the motorcycle I bought this time is YZF-R25, so there was not much space under the seat. This Mistuba unit is large in width but not thick, so I think it is easy to store. (Acuyo's Unit is about two Mistuba's worth, so it is a little thicker.) Wiring is very easy. I used Scotch 3M Tape for car exterior because the double-sided tape that comes with the camera is not very adhesive and may peel off. The response to IgnitionOn is fast and the quality seems to be good even though it is from CHINA. I always think that when I install a Motorcycle camera, whether it is Acuyo or Mistuba, the Wiring from Unit is too long. What is wrong with long wiring is that if you leave it as it is, the wiring gets messy and dirty under the seat, so you have to tie the cord together with a tie band. Even if you put it all together, the wiring is still long, so you have to use Emon's Relay1.Quantity:It takes a little Space for about 5pcs. To install the result, you will need to use the DrarecoUnit+Wiring Summary×Quantity:2pc. Since space for a set is required, it may be difficult to install for those who ride a large type SUPER SPORTS750, etc., which do not have enough room under the seat. My YZF-R25 was neatly put together using D-UNIT, and it seems to fit under the Seat in the Limit. I think it is good to be able to view the recordings on my phone, but I don't really know how to use a phone, so I would like to see an app that makes it easier to understand. I would like you to make the app easier to understand. However, Mistuba is the only company that I can trust for the quality of the DVR, so if I buy a DVR for my motorcycle, it will be Mistuba's product by all means. I didn't know that Mistuba's DVR was available and bought a Chinese AQUILLO DVR for about 24,000 yen, which was a waste of money. It would have been a disaster if I had an accident and it didn't capture the incident, and I'm afraid that the Acuyo would break while I'm using it. View detail
You can mount a posterior CAM on Simple!
There are several companies that sell brackets for mounting posterior CAMs, but we chose Mistuba Sankowa's because they have even the screws in black, and the equipment is simple and does not look like it was installed after the fact.
Compared to the Type, which places the CAM on a pedestal, I was concerned about whether the orientation of the CAM would change due to vibration, but so far it is working without any problems.
View detail
I installed it on my CB1300SB and I like that it comes with GPS and Microphone!
I have been looking for this product since early spring to see if Manufacturer was out of stock, and recently I was finally able to purchase it.
We are satisfied with the product texture, performance, and software.
I also like that it comes with GPS and Microphone in case of emergency.
This kind of product does not work only with Single Item, but it can also be used with a Large-size product with a Quantity of satisfaction by installation.:Pair (for Left and Right) I believe that the company will be
If you have a reliable store for installation, we suggest that you leave it to the store.
Also, as information on installation on the CB1300SB, since the Camera of the EDR-22G is quite wide-angle, the position of the Camera is important to eliminate missing images and blind spots.
We recommend checking that area, including leveling, as it can be checked from your smartphone via the app at the time of installation.
For GPS and manual recording buttons, POSH has released a bracket for EDRs, which is good because it can be installed together.
View detail
The handlebar area is beautiful and looks great!
The fit is so good that it could be handled as an OEM product by Mistuba Sankowa, a manufacturer of digital camera systems.
The handlebar area is beautiful and looks great!
By the way, my mounting position is on the Clutch Side because the Button is only used for manual recording of the EDR-22G (one press for 20 seconds of manual recording) and also for emergency Brake operation.
View detail
Change from Front fork installation Type
This is a change from the Front fork installation Type. The appearance is also refreshed. However, the bracket of ForkEmblem and this bracket partially overlap, so it is necessary to install the driver's recorder first. The angle could be adjusted after installation. It might be easier to install without the additional Type. View detail
Mistuba Sankowa is a reliable Mistuba Sankowa.
This is my second Mistuba Sankowa. I considered a Chinese product because of the budget, but I decided to go with the Chinese product because of its practicality in terms of operation and price. I have to give it a -1 rating because the Microphone is attached to the body.
I am generally satisfied with the rest. Recommendation.
View detail
A little more room for maintenance would be a no-brainer.
We have had a malfunction that prevents us from recording and have contacted the Manufacturer.
Cause. Disconnection This was due to the
I have not disassembled it myself, so this is just a fantasy world.
If you repair it yourself, even though the joint is protected with Resinetc.
Since there is a vibration problem, we would appreciate it if you could design a system that places the highest priority on maintenance.
I believe it was a design issue with Balance for Noise and Weight for vibration response.
We are satisfied with the response of After Service as a Manufacturer.
Not only did I have no complaints, but the Large change was wonderful.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Just the right place.
I was able to attach the Smartphone Holder in just the right position.
It can be installed without any problem with the supplied Bolt.
View detail
quite messy
Used on 10R, glad to be able to use it since the car model has few options for mount position.
With 10R, short arm could not be used due to interference, standard or long arm is better.
Some reviewers say that the bolt does not fit, but the M6 bolt is included, but in my case, the length did not fit.
The bottom of the Screw hole is reached, so the short Bolt owned by the company is used instead.
I didn't use it, but the color that comes with it is Material:Plastic and concerned about durability.
The finish is quite dirty, as is the case throughout the Ram MountSeries.
The right-angle, square structure makes it unattractive and bulky.
View detail
One for each plane to leave evidence in case of an emergency!
It's been about 6 months since I installed it in my first Motorcycle camera, and I think it's taking beautiful pictures.
Depending on the installation method, a separate Band or bar may need to be purchased.
On the REBEL250, the RearCamera is mounted on the License Plate, and I felt that the vibration was large, perhaps due to the single cylinder.
However, I believe this can be solved by carefully considering the mounting location.
It is pricey, but I would feel better if it were installed as evidence in case of emergency.
View detail
I think it's good
It's no longer available on Web!ke, but you can buy it on Amzon as of 1/19/2023.
I am satisfied with the operability, picture quality, etc. 4Inch is just right for the handlebar area of a large car.
The durability of the product is 1 because it has not been used that much yet, but that does not mean it is bad.
At first I thought Monitor was unnecessary, but one Review
I never notice if there's an error or Cable disconnection." when seeing that Indeed!" I chose the Monitor type because I thought it would be easier to use. Also, we chose this product because the touch panel would reflect the body and we did not need to worry about the durability of the button.
I am more satisfied with the monitor than anything else, as it increases the number of devices displayed. It can also be used as a back monitor, although it is sometimes difficult to see due to the light. When I twist my body and look back to check the back of the vehicle when turning a corner, I tend to lose my balance, so I can see the situation directly behind me while looking at the front, especially with a heavy motorcycle.
The installation was done by a motorcycle shop. I don't know the details of the labor cost, but I guess it would have been about 20,000 yen for a single body. After all, I had to redo the detailed camera position and wiring by myself.... If you have confidence in electrical components, I think you can do it all from the beginning.
Body, Camera, Sensor, REMOTE CONTROLLER, etc. are color-coded for easy identification of Cable connections.
However, Camera is the same color for both front and rear, so don't make a mistake. I installed it incorrectly and did not notice it until I tweaked the BackMonitor display. I didn't realize it until I installed it incorrectly and fiddled with the BackMonitor display.
I did not want to drill holes in the Motorcycle or put sticky double-sided tape on the Motorcycle, so I used the supplied Camera Bracket from DAYTONA and fixed it via the existing bolt on the Motorcycle. The inner diameter of the DAYTONABracket was a little wide, so I cut a rubber plate into strips and inserted it between the bracket and fixed it in place. As a result, I think it also prevented slipping and vibration.
This product is available in a range of Quantities:The set is set, but the mount for fixing the Body is no good and unusable.
Even though the body has a beautiful appearance, it will probably be scratched or damaged by the direct contact with the gold part of the mount. The mounting area on the motorcycle side is also likely to be scratched. Therefore, I decided to fix it with RAM Mount, and the additional expense was a little painful.
The Instruction Manual is translated (please enter your input here), but it is a strange translation and phrasing that is common in CHINA products, so if you really look at it, it will make you feel uncomfortable. However, the operation can be done intuitively, so there is no problem.
The GPS Sensor was placed upside down right under the Headlight, but it is functioning without any problems.
The color of my Motorcycle looks like OEM parts, and I don't feel any discomfort.
You can also view videos on Body, but it is convenient to download KYCAM2 (successor to KYCAM in the Instruction Manual?) from the play store and view it on your smartphone. (the successor to KYCAM in the Instruction Manual?) downloaded from the play store and viewed on a smartphone, it is convenient to view images, the road (map) on which the vehicle is traveling, and the speed at that time all at once. The sound is also recorded reasonably well via REMOTE CONTROLLER. However, the sound of the Motorcycle's engine is louder.
KYCAM2 was kicked at first because my phone has anti-virus software, but after I allowed it and downloaded it, I am able to use it without any problem.
Side note:The
On my first touring after installation, I had a near miss with a car (elderly BBA) that ran a red light. Fortunately, it didn't turn into an accident.
Incidentally, the Number of that jaywalking car was also clearly visible.
View detail