Reviews
Only for car model-specific
I had a DOREMI Emblem, but when I installed the DriveRecorder, I bought this and replaced it with a PMC Emblem.
The mounting position and angle of the Emblem and Camera were also to my liking.
Quantity of Bolts required to install the Emblem and Camera in the car model Exclusive Design.:I appreciate the fact that it is a Set.
View detail
I didn't use it right.
It was attached to a steel Fuel Tank and used as a base for a Phone Holder, but when running on a day with a high of 40-Degrees, it tore from the border of the inner Gold genus. It seems that the heat softened it and it could no longer support the weight.
"Must be used indoors/inside a vehicle." I'm not complaining because I used it on an unusually hot day when it says, "I'm not complaining, but just FYI.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Cospa is good
Smartphone Holder is using RAM Mount.
This type is the best looking and the best way to fix it without getting in the way, so I use this type for all my motorcycles.
View detail
PC application compatibility complaint
I used to use CHINA.
There were a lot of glitches.
I am replacing it with Mistuba Sankowa product.
I am satisfied with the product, but
Data import to PC application is unsatisfactory.
About half of the data recorded on the SDCard cannot be imported.
I have contacted Manufacturer, but there has been no response, so I am dissatisfied.
View detail
TimePlus is fun!
Image quality (default 58 fps) is fair
The daytime image quality Number can barely recognize all letters before and after the stop, and 4-digit numbers at the back of the second unit of Right.
When you start driving, you can recognize 4-digit numbers even in the front and back.
One point, I would like to add that there are three picture quality settings:58fps, HDR, and HDR.
1080p/58fps、1080p/29fps、HDR1080p/29fps
Motorcycle is not good for drareco
Yamaha・XG250 TRICKER
I can't compare the picture quality because it's my first driver's camera, but I felt the picture quality wasn't as good as I thought it would be.
There may be a single-cylinder effect and a problem with the location of the installation.
The app is a little unstable, but useful.
The high quality MODE of 1min1File58fps is 100MB, and the DOWNLOAD feels quicker at about 7 seconds.
I think it is easy to use (although I don't know about other apps) because it also shows map and speed during video playback and the own car Pin works.
However, when I tried to play and DL other files, the Wi-Fi connection was broken, etc. It seemed a little unstable.
The SDCard is screwed into the Plus, so it is good to be able to watch videos without the need to remove the SD card.
・TimePlus
The 1 hour and 15 minute run was combined into one video of approximately 5 minutes and 350 MB.
The video is one File per minute (default value) and the GPS on the map is only that section, but
With TimePlus, the entire driving route is displayed, making it easy to look back and enjoy looking back.
View detail
It's not compatible with my black box
Quality and Texture Information Flat Braces Easy installation of black boxes for your environment Size Chart Information License Plate Size Cost performance and comparison with other products. There are a lot of products, but the products that I thought of WeBike packaging is always great. Arrives in a week for delivery and packaging Purchasing concerns, precautions, or advice It's a shame to only give you black box fastening bolts It certainly doesn't fit other brands' black boxes, but it's definitely fair View detail
Convenient to have!
I could not find a good place to mount it, so I bought a Mirror mount because it was EXACTLY what I wanted. As a result, it was Exactly!
I was able to install it without any problems, but I am only worried about theft.
The screws are dedicated to prevent theft, but if the Bracket is broken or the Mirror is removed, it is the end of the world.
I would rather be able to take it off and on easily, so I can carry it with me.
So, I am Covering as a self defense.
View detail
Only Ball can buy it.
Only the Ball portion has become saggy.
I only bought this one because Bolt is still available.
Webike is kind enough to buy only here.
View detail
ease of use
[How is it used?
City driving and touring
Was the one you received as per Image?
Yes
How was your experience with it?
good
[Points to note]
None
How did it compare to other products?
I've never used any other Manufacturer.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Camera abnormality immediately after opening the package.
After opening the package, I connected the battery and checked the operation, but the Camera error message kept blinking and I could not record. View detail
A little processing was required.
I purchased this product to install Transcend DrivePro 20 near the handle, because the included fixture was not good enough, as it did not have angle adjustment function.
DrivePro 20 and LeFH-e 2waystyle (DriveRecorder/ActionCam) However, the result was that it could not be used as it was, and needed to be modified for use.
The DrivePro 20 has a slightly concave shape in the middle, and I felt that I could use it in the middle by shaving the protrusion on the inside of the bracket. So, I carefully shaved the inside of the bracket and the entire inside of the bracket with a router, and managed to make it usable in the middle of the bracket. Unfortunately, the Indicator Lamp was covered by the Bracket, so we drilled a 5mm hole in the top of the Bracket so that the Indicator Lamp could be seen. The bracket is now usable without any rattling, but I am a little concerned about the durability of the bracket since I had to cut the inside of the bracket.
This product is made entirely of plastic, so it is easy to process. The clasp is also made of plastic, so if you try to force the clasp to tighten by inserting an object with an incorrect diameter, the clasp is likely to break at a very high rate.
View detail
Excellent "point to take with "Motorcycle
[How is it used?
...from approximately December 17, 2022 to September 21, 2023, inclusive.
Base is attached to the helmet using the included double-sided tape mount.
Was the one you received as per Image?
As shown in the image, as shown in the Image.
The previous generation:Bs-8a (https://www.webike.net/sd/23562886/) looks almost the same, for better or worse.
How was your experience with it?
The signal is almost always visible while it is on the screen with no problems at all, giving a sense of security. Also, the image quality is clear enough to be recognized.
The battery can also be recorded at all times while running from morning to night, except during breaks. However, if you run until nighttime, it is safer to charge the battery somewhere during breaks.
USB TypeCCable is used for charging, but it is not recognized if both ends are CCable, and USB-A is required for the One Side. In short, a cable that can charge B+COM SB6X is acceptable.
The Magnet base is a Strap that prevents falling off, but falling while driving has not occurred since the previous generation.
Because it is mounted on a helmet, it has the advantage of being able to take pictures in the direction it is facing, unlike vehicle-mounted systems.
To mount on Helmet, if the driving posture changes between motivated and unmotivated, the angle must be readjusted or only the sky will fit in the angle of view.
Because it is mounted on a helmet, the Image is easy to record against a four-wheeled vehicle that will bury the Motorcycle in a single blow.
The file is recorded on a microSDCard, but the internal file can be viewed on a Smartphone (Google Pixel 7 Pro) by using a type-CAdapter from USB-A while the SDCard is inserted in the body.
The sound and vibration notifies the user when the device is activated and when it is closed, so the user does not have to worry even if the Body is not visible from the mounting position.
I felt evolution from the previous generation because various settings can be made only with Body by long-press activation.
Mysterious blinking function added to Light, but not yet used.
Body weight is not light, but I don't think I feel a tilt in the center of gravity or directly related to fatigue when running around with it on Helmet.
[Points to note]
Although the body has evolved, with settings now possible only on the body and the charging terminal changed to type-C, the parts described in the previous generation's Impreza (https://imp.webike.net/article/414070/) remain unchanged.
The round part connecting the rubber cover on the back to the body is still too thin, and even though I had recognized it, I tore it off the first time. However, the rubber cover itself is too tight and does not come off unexpectedly.
The screws on the mounting base were re-tightened and hardened with Aron Alpha. The tightness of the screws determines the fixation of the body, so if the screws are tightened too much, it will be impossible to change the angle of the body.
How did it compare to other products?
Despite the weight of the Body, we felt that in many cases this product was superior in terms of continuous shooting time.
The image quality is beautiful, but if you want to keep a record of your touring and conversations at Income, I thought it would be easier to use SENA, which is integrated with CameraIncome.
In exchange for its weight, this product boasts a long recording time. Although we have not been able to evaluate the durability of the product, we believe that it is highly durable, as Base is used in Japan where the equipment is running around and waiting for prey without regard to the season or weather.
On the other hand, except for the Body, all the shortcomings of the previous generation have been carried over, including the giving up of the possibility of seeing no evolution except for the Body.
View detail
Fits: Others
It takes a long time to watch a video.
This is attached to VSTROM1050XT.
It is equipped in case of emergency.
I thought it would be a two birds with one stone to also check my daily Riding, but I think I will only check the video when I have an accident because it takes a long time to download to watch the video and it is a lot of hassle.
Installation is no problem at all if you have the general knowledge and ordinary skill to disassemble the exterior and have electrical tools.
View detail
DriveRecorder worn on the body
I bought this one because I didn't need to splice Wiring.
I hung it around my neck and used it with an automatic motorcycle. I dare call it an automatic motorcycle.
Fitted full face helmet
MotorcycleType Sports Type
The result of using the front Camera has an image, and the Rear Camera has no image. (Helmet is interfering with Camera.)
Battery is limited to about 3 hours.
In conclusion, a Motorcycle is a Motorcycle is a Motorcycle is a Bicycle!
Battery also may not be able to take pictures at critical moments in long touring.
If the battery runs out because it cannot run while charging, it would be dangerous because there would be a Damage to the neck if the equipment was worn around the neck and the person was falling.
Needs a little more evolution.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
It is quite a nice attachment!
These parts replace the bolt for the Handlebar Clamp and allow the RAMMount to be installed.
I am in this state of attachment (⇒ see photo).
It was quite a challenge, but I like the way it is attached to the handlebar and it does not affect the handlebar easily.
This will be useful for attaching a smartphone or Radar or something.
View detail
That it is a lightweight MODEL of the same SERIES!
It's hard to see in the picture, but since the style is to attach directly to the Handlebar Clamp, we wanted to make it as light as possible. PlasticMODEL." The Company has changed the name of the company to
In terms of the Short Type, the shape is exactly the same as that of the Gold Model, so there is no problem, and it was installed successfully!
It worked better than expected, it's perfect!
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Essential Items for attaching the Smartphone Holder to the ZX-10R.
Essential Items for attaching the Smartphone Holder to the ZX-10R.
The installation itself is not so difficult, but the Screw where it is attached is special,
It is impossible without a proper Torque wrench.
[Maybe it's just the '24 model, but...]
It also requires a locking agent, so at first glance it looks like it can be popped on, but to a certain extent it is.
Tools and equipment are sometimes necessary.
I've only been using it for a short time, but the RAM Mount system is just as good. Durability is for sale,
It is safe in the knowledge that it will not break that way unless it is defective in the initial stages.
View detail
very strong
I installed the Ram Mount M8 bolt holes with 1" ball directly on the handlebars of Ducati StreetFighter 1098S. I installed the Ram Mount ball with M8 bolt, bolt holes made from aluminum so it's very strong. View detail
Halfway to use in Motorcycle
The concept of wearing the Motorcycle instead of attaching it to the Motorcycle itself is good, but there are some questionable points in terms of usability.
The point that it only operates for 3 hours or the low waterproof property seems to be fatal.
I can't Check images, whether it's incompatible with my iPhone or my settings are bad.
Many times I was disappointed when I saw what was recorded.
View detail
It's easy to use, but it's a Large size.
[How is it used?
I purchased this to mount my Gopro.
Was the one you received as per Image?
It is standard, but quite longer than the Image.
And it is quite heavy.
Was the installation difficult?
It is easy to use because you just turn the handle to loosen it and insert the ball into the loosened part. However, when I loosened the Dial too much and it came off, parts were scattered.
Please be careful not to loosen it too much.
How was your experience with it?
It is long but easy to use because of its flexibility.
[Included Parts:were they on?
Instruction Manual。
[Was there anything that disappointed you?
I wish it was a little lighter and Compact. It's a bit tough on the half side, so which would you take?
View detail