Reviews
Fits: KAWASAKI NINJA 400, YAMAHA YZF-R7, DUCATI STREETFIGHTER V4, YAMAHA MT-03, Others
Very good for SSMotorcycle
[How is it used?
Used during touring, always installed
How was your experience with it?
There are two sizes available, and I purchased the Large size.
I had given up on SeatBack because the seat itself is too small, but when I found out that there was a SeatBack for SS, I bought it.
It has a special shape, and the base part is small to fit the Seat,
It widens toward the top.
It has a reasonable capacity, and the Net is attached to the lid, so it can be stored there as well.
This is very convenient for what it is.
A 500mmlPlastic bottle will hold about 4 to 5 bottles.
I usually keep my hat, Wallet, 500mmlPlastic bottle, Towel, and Rain Cover.
The fabric inside is also firm and does not have a problem with getting wet.
Included Parts:A Rain Cover is also included to protect it from the rain.
There is a hole in the zipper section to close the key.
However, note that the holes are smaller than those of other backs, so you have to choose the right key.
Level that does not get in the way at all while driving and makes you forget that it is equipped.
The shape is also very well thought out and does not destroy the Motorcycle Forme.
[Points to note]
There is a hole in the zipper section to close the key.
However, note that the holes are smaller than those of other backs, so you have to choose the right key.
How did it compare to other products?
No comparison because there was no other SS Backpack like this one.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Classic look and functionality
Material of leather-like color and texture is used for each part, so much so that it could be mistaken for leather in appearance.
It is just as easy to use as the original, and has the right size and features for a day of touring.
I have only just purchased the product, but I am concerned that it will deteriorate as I continue to use it.
It is a little pricier than Original, but if you like the look of it, you can't go wrong with buying it.
View detail
great item
I am a SR400FI user. I have been using it with Henry Begins' touring seat bag in the past, and I was quite satisfied with its versatility. It's not damaged or lost yet, but I thought it would be nice to have a spare, so I bought an additional one. Recommended for touring. -------------------------------------------------- -------- SR400FI user. Previously, I was using Henry Biggins's touring seat bag, and I was very satisfied with its versatility. I haven't been damaged or lost yet, but I thought it would be good to have extra. Recommended for touring. Powered by Google Translator View detail
Not available
Installed on a ZX25R.
The installation itself is very easy and can be done quickly with a Hexagonal Wrench.
After installation, I tried to use it, but to my surprise, the Wire length was too short to use.
I have a Smartphone Holder attached to the Daytona Clamp Bar, but it gets in the way and hits me.
I am considering whether to remove the Smartphone Holder or the Wire lock that I have installed.
View detail
It peels right off.
I stuck it on the Helmet in Upper Cowl of NC750X, but it peeled off soon due to the bumps.
(Of course, degreasing before applying and crimping afterwards)
The soft material makes it easy to apply, but I wish the adhesive was a little stronger.
I think there is no problem if it is a flat part or a curved part.
View detail
For my first Seat bag!
It would be ideal for a day trip or overnight touring.
This size is very convenient for SIDEOpening. However, the opening at the top is a little narrow, which is unavoidable due to the size.
It is well made and very well equipped with Accessory Case and storage behind the Flap.
for the first time
I think it is very good for Seat bag to buy.
View detail
Three-dimensional Emblem and MappleR are unsuitable.
[How is it used?
I bought it because I wanted an easy-to-access storage place for my motorcycle, which does not have a loading capacity, and for my rain suit etc.
I did
Was the one you received as per Image?
The quality is perfect because it is made by TANA-X. I was just right in terms of capacity.
I was initially unable to install the product because I had no idea that the magnet flap interfered with the three-dimensional emblem.
The magnet was not sewn. So, the magnet was removed from the seam and re-sewn by hand in the proper position.
I know it's a task that really shouldn't have to be done. (about 2h lol) 。 After the repair, it is working fine.
The adsorption and usability of Magnet flap is no different than before the repair.
How was your experience with it?
As for the storage capacity, 1 upper and lower Rain Suit 2 loading tools 3 spare lever 4Puncture repair material 5Touring mapple
6 security Goods and small objects. (If you want more capacity, please go to 2-deck type. (If you want more capacity, please go to 2-deck type.)
The magnet is so strong that the anti-drop sling is unnecessary. We even took it on the highway a few times.
but I have never had a Gap. However, it is safer to add Sling.
I knew in advance that Touring mappleR would not be included, but in fact it was. It was a little tight.
So I removed the binder and split the booklet into two parts and put them in the transparent section. (Divided in two parts, north and south of the map)
Included Parts:Sling and Rain Cover for drop prevention.
[Points to note]
Cars that do not have three-dimensional emblems can be installed without any problem in the first place.
...As for capacity, be careful, it's really minimal...if you're feeling overwhelmed by the two-tier system or going out for a day trip.
It has a temporary storage place to put Glovesetc. when you stop by Convenience.
After comparing various other products by Tanax, we chose this one because of its low price range and the fact that a single-stage system is sufficient.
I've often heard people say that the magnet gets sand on it, but I think it's better to fold the flap and then put it somewhere else.
After about 20 times of use, I have not experienced any scratches on the car body or any other problems.
No, it is not. If sand, etc., gets on the tape, it can be removed by adsorbing it with the tape.
It was even more convenient when combined with a leg bag (for valuables).
View detail
Make the New Model rather than the conventional model!
This is a replacement of the conventional Mini Field Seat Bag (MFK-100) to the New Model.
The previous model was also easy to use, but the New Model has been improved and is much better.
The opening at the top is narrow, but the new access from the side is very easy to use.
In terms of details, the conventional KSystemBelt was so long that the excess belt had to be stored between the backs, or even if it was stored, it would come off and roll around while riding (some people did not like this and cut the belt off). The New Model has been improved to one equipped with a Surface Fastener that can hold the excess Belt together. It is a little bit easier to use, but much easier to use. Compared to the previous model, it is also much easier to attach and detach the KSystemBelt itself.
The conventional model is still sold together with the new model, but I think that those who are going to purchase the new model will not regret it, even if it is slightly more expensive.
View detail
Cost-effective, but the build quality is not as good as the price.
As per Title, but the cosmetics are certainly good when you consider Bag and Bracket all included.
However, although it is sufficient for private use only, it is a little delicate for commuting use due to the following points.
At the time of purchase, I was a little disappointed because I was hoping to be able to use it on my commute to work, so I am giving it a -1.
weak point
The bag is quite cheap, especially the handles, and although it is intended for commuting, I have some resistance to using it as a business bag.
There are no compartments in the Bag and it is not suitable for carrying PCs or documents.
It is painful that there is no choice of bag and no possibility to replace the bag with the one you like because it is a dedicated Plate, not a Universal one like other companies.
I was also expecting to be able to put a little large item in it as long as the zipper is tightened, but when I put a tall item in it, the magic tape can't reach the front and I can't close the front.
The bag itself is difficult to use, and the cheapness of the construction is the most annoying aspect of this product.
It was good point
Installation of the Bracket and Plate is extremely easy and takes less than 10 minutes for those who are familiar with it.
The price is very reasonable for a complete set of side bags, and as advertised, they can be attached and detached quickly and easily.
The bag, which was disappointing, is also at a level that would be sufficient for private use only, so considering the cost, it is an acceptable level.
I would be very happy if you could develop a variety of bags that can be attached to this bracket in the future, with the bracket being dedicated to the car model and the bag being common.
If that happens, this product will also be a Side bag introductory quantity.:I think it can be recommendation to everyone as a Set.
At this time, it seems that recommendations can be made only for those who are not concerned about the bag and want to add a side bag at a low price.
View detail
For CUBC125 Seat bag installation
Purchased a Belt for fixing Seat bag on CUBC125 (JA58)
The C125 has a small cargo bed area and not much space to fix the belt, so this plate is used.
Installation is as simple as removing the Number and re-fixing it on top of this Plate.
View detail
Fits: HONDA CBR250, Others , SUZUKI BANDIT1250 , YAMAHA XJR400, KAWASAKI NINJA 1000 (Z1000SX), KAWASAKI Ninja250R, HONDA HORNET250, HONDA CB1100 RS
Functionality and design are quite good ◎Seat with a forward tilt is a bit of a burden
[Design]
The silhouette like a treasure chest is stylish and enhances the sense of ownership. The design is quite large, so it is suitable for medium to large sized motorcycles with a wide width.
[Loading capacity]
With a total capacity of 75 liters, it has a larger capacity than the Large type Top case, so it can be used for long distance or camping touring on consecutive days. In addition to the cargo space, it is equipped with a Holder Belt and a Holding Cord, so it is possible to load long luggage, Tent, Silver Matte, etc. without sacrificing capacity. In addition, there is a small Porch Bag on the SIDE, which is convenient for storing the attached Rain Cover, cords, or small items such as a wallet that can be quickly retrieved. In addition, there is a PET Bottle Holder and a storage bag on top of the cargo compartment for storing souvenirs, etc. It is a BigBag with load capacity that you can't imagine any more.
【Functionality】
The inner frame at the bottom is made of a hard material so that even motorcycles with small rear sets can be loaded without bending, which is good looking. The side porch is 59 liters when stowed, but it can be expanded to 75 liters. The fastener is double-layered, and when the other fastener is opened, you can directly access the cargo area from the SIDE porch. It is very good to put frequently used items in the SIDE porch and put the items that may be used next in the edge of the cargo area for quick access in case of emergency.
However, since the bag itself is large, the Rain Cover is also large, and it squeezes the storage space a little. And the Rain Cover has come off easily several times when driving at high speeds.
[Durability]
I have driven about 30,000 km with it installed and there is no noticeable damage. However, when fully loaded, the bag tilts forward when breaking. This may depend on the motorcycle, but no matter how much I pull it backward, the bag itself deforms into a rhombus shape and the top part falls forward. I don't want it to touch my back while driving, so I push it back with my ass, but it is quite stressful on mountain roads because of the acceleration and deceleration.
After a few years of use, it loses its crispness. When there is nothing in the case, the outer top cover is a little awkward.
However, the fabric itself is sturdy and can be used in direct sunlight and some rain with almost no maintenance.
【Review】
There is an advantage of a soft type bag that a hard type top case does not have. It is that its flexibility allows for a little bit of flexibility. Soft type bag can be easily packed by taking advantage of its flexibility. However, it is difficult to store a chemical fiber Schlafsack, etc. because there is a belt inside to prevent the bag from collapsing. Also, I wonder why there is a PET Bottle Holder only on one side of the Right Side.
In terms of durability, I think the product would last longer if the four corners were reinforced a bit more to prevent deflection.
View detail
Light weight is a plus, and it would be great if it were smaller when stored.
[Design]
The design of the Rear side is tapered to avoid Rear blinker and exhaust system. The tapered rear side is designed to avoid the rear blinker and exhaust system, which may cause interference depending on the vehicle.
【Functionality】
Many of Tanax's Bags have a mechanism that allows you to add capacity. Before I bought the bag, I thought the difference would be only 1 to 2 cm, but when I actually use it, I am quite grateful for this small difference. I was surprised to find out that the bag is not as bulky on the way back as it was on the way in, even though I could carry it in Beauty.
The strength of the material is not a problem at all for highway driving. The material is also easy to clean.
[Capacity]
It is perfectly suitable for solo touring for one night or two days, and if it is small enough, Plus and souvenirs can fit in it. It is also suitable for a day trip to Laer Two, etc.
【Review】
The design is highly compatible with the company's Seat bag, so it will be fun to have a variety of different bags. If you have this product, a tank bag, and a rear seat bag, you should be able to spend 2 to 3 nights in a row.
It would be best if it could be folded for storage.
View detail
Mounting Belt
I would like to be able to choose whether the mounting Belt should be Seat-mounted or body-mounted. View detail
Replacement for Touring Seat Bag
[How is it used?
For Touring
Was the one you received as per Image?
Yes
How was your experience with it?
I used to use a Mini Field Seat Bag, but my only complaint was that the opening was too narrow. Now that the bag can be accessed from both sides, it is much easier to get in and out of the baggage. The longer upper bungee cord also helps. I think this is a very good product that you can't go wrong with.
[Points to note]
The only Belt for fixing to the Seat comes with the KSystemBelt, so it would be better to buy a separate 4-point fixing Belt if you are riding a sports type motorbike with Small or Full Cowl Rear Sets, for example.
How did it compare to other products?
I also considered Henry beguine's Seat bagPRO2 in S size. the Seat bagPRO2 has a wider opening at the top than tanax and I thought it was easier to take things in and out, but I could not open and close the SIDE with S size, so I decided to use tanax again.
[ITEMS TO BUY TOGETHER
It is convenient to purchase Touring net as it comes with 6 D Rings.
View detail
Thank God I can buy it.
[How is it used?
I decided to go touring for the first time in a while, but there was no fixed Belt. I was pissed at myself for not being able to clean it up and bought it.
It's nice that Webike has these products in stock and delivers them immediately.
Was the one you received as per Image?
It is as per Image.
Was the installation difficult?
Simply wrap it around a good spot on the vehicle body and connect it once the Bag is loaded.
How was your experience with it?
It is convenient because it can be removed by simply snapping it off.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I will try not to lose it this time.
View detail
It was well made and easy to install on the Seat.
I think it is carefully crafted down to the smallest detail. It is also reinforced, so there is no need to worry about it losing its shape. I was worried about the Henry beguine Seat bag, but I chose this one because it has an expandable main compartment. I think I made a good purchase. View detail
Further improvements have been made!
[How is it used?
No Gaps or leaks, and it's running great.
Was the one you received as per Image?
Image
Was the installation difficult?
It was very simple.
How was your experience with it?
It has a fairly large capacity, so overnight touring is not a problem.
[Included Parts:were they on?
It was there.
[Was there anything that disappointed you?
There wasn't one.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Single Body:○. Combined use:◎.
[How is it used?
Used on YZF-R25 and YZF-R6.
Used for overnight long-distance touring, such as 4 nights/5 days or a whole week.
The team was often caught in the rain due to running every day.
・About 500 to 2,500 km of use per trip
Was the one you received as per Image?
The image is as shown in the picture, but the resin panel covers almost everything except the Motorcycle contact area, and it feels harder to the touch than I imagined.
It does not lose its shape.
I think it's a Large hand-made, so I'm sure it's Large sturdy.
How was your experience with it?
A rain cover is included, but because it is in the form of a cover that can be attached even while the bag is still worn, it will be covered with muddy water from the inside when rolled up if the Motorcycle does not have an InnerFender or is short. It is safer to wrap the contents in Vinyl because it will get wet as a result of seepage.
The quantity is a good deal, but it is not a good quantity.:Pair (for Left and Right) Due to the split design, solid large objects such as full face helmets will not fit.
The center of gravity is not so high, so it is not so difficult to run even if you run into the bag at the Seat area. In other words, it does not bother me enough to enjoy running on mountain roads.
In the case of the Fender Eliminator, it is often placed over the Blinker and must be shifted forward.
In the case of R6, it is just high enough to touch the Tandem Footpeg, so it can be used as a base for attaching a bag*1 wider than the Tandem seat.
1 RoughAndRoad : AQA DRY Tail Bag and IRISOHYAMA:RV-BOX600
The hardness of the material prevents it from losing its shape, but it is not small and bulky when stored.
[Points to note]
The above winker position and the rain circumference are the only things to be aware of or it will be a Large disaster.
How did it compare to other products?
I looked at a variety of actual products at motorcycle supply stores, including HardShell, but I felt that this simple product would be fine for a full cowl car because I don't think the bags would look good no matter how hard I tried.
Point and hang of installation
Belt should be cut and seared with a lighter if there is excess. It looked uncool when it was pillowy.
A product that does not interfere with driving and can solve the problem of no loading capacity at all.
Even when used as a Single Body, it boasts the capacity to hold 4 nights' worth of clothes and a small amount of souvenirs, and when used as a foundation, the SUPER SPORTS750 can hold more than 80 liters just for car Both Sides loading.
View detail
Cannot be installed on Crossfire125xs
There is nothing wrong with the product itself.
I had installed Plate Hook 3 on my SEROW250 and liked it so much that I purchased this product for my Crossfire125xs, but the License Plate Light interfered with it and I could not install it.
View detail
I would recommend it to anyone who is Touring.
It was installed for the addition of Hook.
There is not much space between the Tail lamp and the License Plate for the Fender Eliminator Kit, so there is a Hook next to the Plate. Three. I chose the
The texture is not that high, but it is thick and the Hook part is firm, and there is no weakness in the feeling of the Hook being applied.:Pair (for Left and Right) If it is fixed securely from both sides, there seems to be no problem with strength.
It is also recommended for motorcycles such as the SS series where it is difficult to secure the seat bag.
View detail