Reviews
It purchased on the occasion for Stainless exchange. Although it is goods which are not in etc. although it is a tool possible [ bolting of the Torque wrench ], and useful, it is a little high tool.
It purchased on the occasion for Stainless exchange.
Although it is goods which are not in
etc. although it is a tool possible [ bolting of the
Torque wrench ], and useful, it is a little high tool.
View detail
Texture was good. Since the Schickness gauge considers consumable goods, cheap one is saved.
Texture was good.
Since the
Schickness gauge considers consumable goods, cheap one is saved.
View detail
It purchases in order to adjust a Valve clearance. -- it is cheap -- -- it is easy-to-use and is also putting accuracy in order! It is one [ highest ] without the complaint.
It purchases in order to adjust a Valve clearance.
-- it is cheap --
-- it is easy-to-use and is also putting
accuracy in order! It is one [ highest ] without the
complaint.
View detail
[Webike Monitor] To Valve-clearance adjustment, the Size has also gathered enough and is cheap positively!!
[Webike Monitor] To
Valve-clearance adjustment, the Size has also gathered enough and is cheap positively!!
View detail
It purchases to Tappet adjustment. Since it was cheap than expected, it was good.
It purchases to Tappet adjustment.
Since it was cheap than expected, it was good.
View detail
It purchased in order to extract the bearing collar of the Stainless bearing of NSR250R. Since the width of tooth of 22 mm is quite a larger Size, those who are used for the same use think that what has width narrow to a slight degree is suitabl
It purchased in order to extract the bearing collar of the Stainless bearing of NSR250R.
Since the width of tooth of 22 mm is quite a larger Size, those who are used for the same use think that what has width narrow to a slight degree is suitable.
- which is helpful since the hard Race escaped only from that somehow -- when carrying out the leaving talk, it was very helpful, but if quality is also common and usually considers the thing of a delivery date or a mailing cost, the Home-center purchase of a price is first.
It is not necessary to hurry, and when placing an order for adjustment of mailing cost no charge, I think ant kana.
View detail
It purchased for the tappet adjustment of NSF100. Although purchased from the low price of the price, anything does not have fault, either and I think that they are good goods. In the direction which asks for cost performance, it is a recommend!
It purchased for the tappet adjustment of NSF100.
Although purchased from the low price of the price, anything does not have fault, either and I think that they are good goods.
In the direction which asks for cost performance, it is a recommend!
View detail
Since there were many tandems with a wife, adjustment of rear suspension was done comparatively frequently, but the pin spanner of the in-vehicle tool was used until now. However, when it was an in-vehicle tool, what it is hard to do by CHACHI was sur
Since there were many tandems with a wife, adjustment of rear suspension was done comparatively frequently, but the pin spanner of the in-vehicle tool was used until now.
However, when it was an in-vehicle tool, what it is hard to do by CHACHI was surely a source of the trouble.
Then, it purchases drastically in Webike at the time of sale.
Since it is adjustable so that a path can be united, if it has one, it is the reason which that it can be used for all the motorcycles determined.
Purchasing, the good point is the hole which has opened at hand.
Since it is made to the holes of 9.5sq, a spinner handle etc. can be used inserting.
Moreover, although GATA surely worried the adjustable tool, the point is overanxiety and there was not GATA to the extent that it cares especially.
it is convenient, if it also comes out indeed that the honda specifies pure and you have it one.
View detail
It can use in a narrow place and is convenient!! He buys it at the time of adjustment to mailing cost no charge, and there must be no loss.
It can use in a narrow place and is convenient!! He buys it at the time of adjustment to mailing cost no charge, and there must be no loss. View detail
It purchases in order to challenge the tappet adjustment of KSR110. It is as cheap as it says, It says by such a cheap tool. Are the die length, form, and user-friendliness of a gauge as perfect as uncertain (smile) considering the tool used by th
It purchases in order to challenge the tappet adjustment of KSR110.
It is as cheap as it says, It says by such a cheap tool.
Are the die length, form, and user-friendliness of a gauge as perfect as uncertain (smile) considering the tool used by the work which determines the engine engine performance at it?
Although there are also goods with many kinds of thickness of a gauge inexcessively, to put it bluntly, it is useless.
If there is even a kind of required gauge, it is sufficient for Koto.
It is made required and enough, if that meaning is also this product.
Let's take out * five pieces without a complaint!
View detail
It is because the motive of purchase is needed by exchange of the rear sprocket of a minimoto. Although the low thing of the grade of KTC was always used, since the angle was attached, the glasses wrench interfered in the tire and did not go into a nu
It is because the motive of purchase is needed by exchange of the rear sprocket of a minimoto.
Although the low thing of the grade of KTC was always used, since the angle was attached, the glasses wrench interfered in the tire and did not go into a nut.
By a spanner, since it did not bite firmly, it was not able to be used.
Since only a straight type can be used after all, it purchases hurriedly.
There are various manufacturers of a tool and a price is also PINKIRI.
It was decided for the reason with ? for which prices are also not combination but both glasses (a spanner is not needed), and the machine of the honda uses them so so under such circumstances that it would be this glasses wrench.
It is the highest when it uses.
(1) It adapts itself to a hand slenderly and a feel is transmitted easily.
(2) The head is a little somewhat smallish (being 17 mm outside-diameter 8.5 mm in thickness of 25 mm).
With the 26.5-mm outside diameter of 10.5 mm, KTC which it has can be used, even place [ narrow ].
(3) Since one of the two is six angles, when hanging firmly, it is convenient, and it is a stake to a slight lack about the head.
(4) Die length is also right just and torque tends to apply it.
It was such touch.
When a straight is in a tool box, it is a useful tool.
View detail
It was used in order to remove the flywheel of honda VT250 SPADA. (Refer to picture) The bolt attached to the crankshaft from the first is removed, and this rotor puller is attached, and it fastens and removes a flywheel. Since there was no reason
It was used in order to remove the flywheel of honda VT250 SPADA.
(Refer to picture) The bolt attached to the crankshaft from the first is removed, and this rotor puller is attached, and it fastens and removes a flywheel.
Since there was no reason for separating only by merely fastening a rotor puller, the flywheel was fixed by the universal holder, and the rotor puller was struck, turned and removed by the plastic hammer.
Since structure was solid, it did not feel uneasy at all about use.
View detail
It was used by the ZZR1100D (1999 models) normal CVK carburetor. A hose is only connected with the mounting hole in a carburetor holder, and it is measurable only with an attached hose. (It is a check required about a service manual) The carbureto
It was used by the ZZR1100D (1999 models) normal CVK carburetor.
A hose is only connected with the mounting hole in a carburetor holder, and it is measurable only with an attached hose.
(It is a check required about a service manual) The carburetor circumference had little space and it took pains over attachment of a hose.
Although it was also severe to have taken alignment and it was rather difficult, it can do, if patient.
A vacuum gauge main part is as being in specification, and I think that quality is good.
being related with the amount of money -- it is -- although -- if it refers to the parts number (service manual statement) of the brand-name parts of a kawasaki -- the 57001-1369 vacuum tester (KEK-55-5) amount of money I think that considering 132 or 300 or more things it is fully permissible.
Before purchase, it was preventing from touching the check of a butterfly valve opening, and the screw for adjustment visually.
It can check now for a numerical value with a concrete check of alignment, and was good.
View detail
It purchased by the adjust wrench set and a set for the tappet adjustment of YBR125 ('06). If die length was insufficient, it was worried for a while, but in my case, it was required sufficient die length. In the case of a motorcycle with bad serv
It purchased by the adjust wrench set and a set for the tappet adjustment of YBR125 ('06).
If die length was insufficient, it was worried for a while, but in my case, it was required sufficient die length.
In the case of a motorcycle with bad serviceability, a little longer thing may tend to work.
Since turn is only tappet adjustment and plug gap adjustment, after using, it washes by engine oil each time, wipes off lightly, and is IN at an attached case.
A few is a spell called the kana which lasts long ^^;
View detail
It purchased for exchange of the plug of HONDA SHADOW400 NC34. Although it arrived to the plug for a while or was anxious, the plug was able to be removed somehow. Although the wrench was caught just for a moment, it has exchanged safely.
It purchased for exchange of the plug of HONDA SHADOW400 NC34.
Although it arrived to the plug for a while or was anxious, the plug was able to be removed somehow.
Although the wrench was caught just for a moment, it has exchanged safely.
View detail
The thing which was being front-used broke and it purchased by the change. Since the gauge is comparatively legible, I think that it is good. I feel that it is somewhat high in case of the analog type of a vacuum gauge. -- (made in JAPAN therefore
The thing which was being front-used broke and it purchased by the change.
Since the gauge is comparatively legible, I think that it is good.
I feel that it is somewhat high in case of the analog type of a vacuum gauge. -- (made in JAPAN therefore ?)
View detail
Although it had ridden on SR400, the goods here were used by tappet adjustment. Although 0.10 mm and an exhaust side perform tappet adjustment of SR at 0.15 mm in an inspired air flow path, since there is a gauge of the size exactly, it is very conven
Although it had ridden on SR400, the goods here were used by tappet adjustment.
Although 0.10 mm and an exhaust side perform tappet adjustment of SR at 0.15 mm in an inspired air flow path, since there is a gauge of the size exactly, it is very convenient! Since a price is also cheap, it is bought, and there is no loss.
View detail
It was used for tappet adjustment. Since it is consumable goods, the low price of this price thinks that it is good.
It was used for tappet adjustment.
Since it is consumable goods, the low price of this price thinks that it is good.
View detail
The die length of the feature of this schickness gauge is a long time moderately. It can work like a photograph also at the time of adjustment of valve clearance, being able to have a margin. Although the shorter gauge was used before, troubles we
The die length of the feature of this schickness gauge is a long time moderately.
It can work like a photograph also at the time of adjustment of valve clearance, being able to have a margin.
Although the shorter gauge was used before, troubles were suffered without the ability to perform flexible bending like a photograph.
I think that they are goods excellent in cost performance.
View detail
It was used for the tappet adjustment of ST250. Though troubles were suffered since the number of bulbs was two, it was able to do by itself. Since it was quite thin, reinforcement was anxious, but it is satisfactory at all. Since it is a prec
It was used for the tappet adjustment of ST250.
Though troubles were suffered since the number of bulbs was two, it was able to do by itself.
Since it was quite thin, reinforcement was anxious, but it is satisfactory at all.
Since it is a precise tool, when using it several times, the way exchanged for the new article may say.
A price is also cheap.
View detail