Reviews
Steering stem nutWrench
Stem bearing purchased for replacement, because the service manual tightened Torque was stated, it was found that Torque wrench could be used somehow and found this product.
How to use Torque wrench to Spanner to 90-degrees and tighten it can apply the prescribed Torque.
The product of DAYTONA chose this product also because it is used as Torque wrench impossible and Honda OEM.
Usability was satisfied as I expected but satisfied Stem Nut It was too light as I closed it with Torque, so I adjusted it several times by hand tightening.
Cost performance is a bit bad so we have four stars.
View detail
Tentatively necessary first
Piston ring is indispensable for gaps and valve clearance measurements. Even if you do not have many Size cards, you can basically Cover in combination. If you do not apply Oil first, hard and thin Blade will bend.
Well, it is inexpensive so you can buy it at consumable item Level even if it is torn.
View detail
With this, the sound will be lost.
I used it for GORILLA, MONKEY. Bore upetc. It uses Engine for budding Tappet since we finished the assembly. Thickness Gauge had heard from seniors from old days, but I used the Thickness Gauge that I had been tightened several times with a stingy but I had an affordable KOWA Thickness Gauge So I bought it.
The ease of use of the product is not much different from the previous Thickness Gauge, but I thought it would be better if there was a little more length. Anyway, the price is cheap and it will be saved.
View detail
I can tell by using it
After all it is the best to drive in Bearing.
If it is Sun Machine it may be good for A or S, but as long as I use it at work I still want this reliable tool.
Since I'm a factory that does not cut tools large, I was driving with Socket and waste Bearing Tohoho
Tool is strange and there is not really any opportunity when I do not have a chance to use it, but it really is a problem if I do not have a tool to use when using it.
You should buy the technology and time you can buy with Gold.
View detail
JAPANQuality
Although it is not frequently used personally, precision machinery does not want to buy cheap items.
Kowa Seiki is the best Vacuum Tester.
It is favorite..
Synchronization becomes an individual's arm - -
View detail
JAPANQuality
Although I have few opportunities to use, I do not feel like using anything other than Kowa Seiki.
Attachment may be unnecessary depending on the model.
If you get on Motorcycle forever Kowa Seiki is definitely better
View detail
In T-Type Wrench 10 mm, it is transcendental
The tip is a Taper, it is a shape that is easy to enter a narrow part.
Nut and the place to insert in Bolt are made thin, but there is no problem with strength.
Even if you use it, cracks will not come out like a thin walled Impact Sockets car.
Also, because the tip is thin, putting it in Bolt or Nut is easy to see, there is no Stress from Socket wrench + THandlebar.
The length of the vertical axis and the horizontal axis is exquisite.
I bought some TWrench from other Manufacturers, but depending on the application, the width was too long choice, the length was too long, it was one more thing.
I did around the Home center in some shops, but it does not hit anything beyond this.
The previous thin shape is only 10 mm, but I think that other Size will become Kowa Seiki with nature and flow.
For hobby to machine tinkering, this is a mandatory Items.
It is obviously more than a foreign famous Manufacturer.
I do not know much, but is not it a Level that I can boast about owning this.
It's embarrassing, but you can become a little happy each time you use it.
View detail
KOWA Kowa Seiki Analog Vacuum Gauge
I bought it for synchronization adjustment of CB 750 carburetor.
Making details is also easy to use.
However, because there is no exclusive case for exclusive use of expensive tools, I think that those who bought Case can safely store after separately measuring Size.
View detail
For Valve clearance measurement ...
In the item description, "measurement range 0. 04mm 0. 05mm 0. 06mm 0. 07mm 0. 08mm 0. 1mm 0. 30mm Quantity : 1 Set of 7pcs. There is, but 0. 15 mm and 0. Since there are 2 pieces of 20 mm, Quantity : 1 Set of 9pcs. is. This item, Length is 100 mm and somewhat longer and easy to use.
In the opened state, the root is hard and the Thickness Gauge is difficult to put in and out. First of all, applying Oil or a rust preventive penetrating agent etc. to this root part makes it possible to rotate the thrusul and the Thickness Gauge, making it easier to use. 【Made in Japan】 I feel reliable!
View detail
Is it easy to use?
I used it for Tappet adjustment of CUBEngine. Width was also exactly good, I adjusted for Tappet for the first time but it was able to be used without problems. It also helped to adjust the gap of the ignition plug. Small It is saved because it does not bulk. View detail
Individually a little expensive, I want selling Rose
Shared when doing maintenance and restore dozens of people with multiple people in school days
I bought it as a tool of. I think the price has not changed from the past.
I think it is normal to do with a cotton swab, but if it is a cotton swab, it can not be removed,
Cotton Garbage is easy to get out. When the cotton swab is cleaning the cylinder part of Valve seat
I wonder if I can use it.
Because it is a stick of wood, the angle is not right, so it is slightly strict, scrape it like a Taper
Even so it collapses so so it is not good.
In that respect Seat cleaner is sticking an exquisite line. Hardness and accuracy
Good. Large resistance will not be beautiful with a single shot, but if you glide gently, it will be beautiful
Become. There are still some polishing effects, but Seat that got hurt
I can not return it.. Note this point.
(I will glitter it by attaching a fine compound to the original.. )
I think that Material is oil resistant Nylon, but it becomes scratch and stepped wear
It is hard..
Just because it can not be used forever, exchange is necessary if you use it hundreds of times,
At that time I can not buy it at Rose because it hurts. Because it is expensive, I buy it every time in Set
It is tough..
Well, since it is possible to use it without any wear and scratches, if it is individual Youth
It may not be necessary to buy Spare.
View detail
It is a lifetime if you use it with Motorcycle
【What made you decide the purchase?】 It was cheap in JAPAN.
【How was it actually used?】 It can be used without waste.
【Was it difficult to install? (Hard parts case)】 nothing special.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Be careful with rust. Wiping off the oil lightly when measuring. If you can not respond to Size please use several sheets in combination.
[Is there anything I was disappointed about?] None
【Hope for Manufacturer - Please tell me if there are any improvement points】 None
【Have you compared items?】 Asian cheap Gauge
[Others]
It was the only condition of Kowa if it was a condition that it was exactly good at domestic production and Compact.
It is made with very high precision, and it fits snugly when you folding it.
Although I have bought Asia's cheap Synness with another business, although I can measure it
It was hard to put in and out and it was hard to use.
I might think that the performance of loading and unloading is not related to the measurement, but wait a moment!
Since there are many times to use multiple sheets in a stack, the performance of taking out and taking out is related to Large as usability convenience!
This is a bad thing to do Sickness is getting irritated.
The durability is also quite high "Do not rust" "Do not press hard" "Do not fold" The three iron rules of
I think that it is lifelong if you protect it. Indeed, I myself used for 23 years without any problem. so much
Although it is not used frequently.
It is a pleasure to buy such a high precision measuring instrument at around 500 yen.
Ultra is recommended.
View detail
It is good to make it for the price. Attention to storage method
Case is also included
I think that there is no problem with accuracy.
This was bad treatment of me
Once it got wet in the rain so let it dry
When folded and kept, it got rust lightly when looking next. I think that drying should be insufficient, rust prevention ingredients flowed, Oil should be applied, etc. I think that I should have taken care..
View detail
Although he had been thinking from before that it wanted, it was not able to plunge from it being expensive.However, purchase since CR carburetor purchase is carried out and it adjusts with attachment.Unless operation is also broken simply and legible, it
Although he had been thinking from before that it wanted, it was not able to plunge from it being expensive.However, purchase since CR carburetor purchase is carried out and it adjusts with attachment.Unless operation is also broken simply and legible, it uses for a long time.It is kind, if it checks and tampers with using it also at
famous Shop and one person has it some between good one.
View detail
since it is an Adjustment Type -- -- -- although it was worried, it is solid and can fully use.Is there only what the maker specifies as the pure tool?
since it is an Adjustment Type -- -- -- although it was worried, it is solid and can fully use.Is there only what the maker specifies as the pure tool? View detail
It is firm structure.Truly pure.Although Nipple adjustment is not challenged, it can still challenge in comfort.Why are they 3 groups although he wanted only one?
It is firm structure.Truly pure.Although Nipple adjustment is not challenged, it can still challenge in comfort.Why are they 3 groups although he wanted only one? View detail
In individual use, since it does not use frequently, I think that durability is not much unnecessary.We can use it satisfactorily at all and it is recommended.
In individual use, since it does not use frequently, I think that durability is not much unnecessary.We can use it satisfactorily at all and it is recommended. View detail
It is a correct answer in a brand-name product reliable since heard that a cheap thing has exhaust leakage from details, the Kowa energy machine's product was decided on and it uses for a long time.
It is a correct answer in a brand-name product reliable since heard that a cheap thing has exhaust leakage from details, the Kowa energy machine's product was decided on and it uses for a long time. View detail
There may not be any troublesome operation like an indicator meter type, and there may not be any worries about failure, either.It was able to use by the easy operation also for an amateur.Although it is expensive, it is one article needed.
There may not be any troublesome operation like an indicator meter type, and there may not be any worries about failure, either.It was able to use by the easy operation also for an amateur.Although it is expensive, it is one article needed. View detail
Since it was wasteful that it became impossible to use when it changed when it was a stationary type authentic positive in a Manufacturer, the adjustment type here was used.Compared with a Manufacturer authentic positive one, it was cheap, and since it us
Since it was wasteful that it became impossible to use when it changed when it was a stationary type authentic positive in a Manufacturer, the adjustment type here was used.Compared with a Manufacturer authentic positive one, it was cheap, and since it used ordinarily, you could choose here. View detail