Reviews
Fits: YAMAHA MT-09, YAMAHA MT-09 SP
Excellent cost performance Full Exhaust System!
I installed it on MT-09
The OEM exhaust system is Short Type, and I like the design The short feeling of SCORPION was the deciding factor
・Short
Light (1/3 of 2.6kg NORMAL)
Not too noisy (with Baffle, plus a DB killer at the base of Silencer) (e.g. "I'll be back")
In Circuit, if you remove both of them, StraightSound is used
Made in Europe
100,000 yen budget
The color of this item is Chrome when it is new, but this item will have the characteristic burn of stainless steel pipes (The color will come back if you polish it with Stain Magic, etc.)
Silencer end's Reddish Ring is one of the most stylish
With the included Baffle, the volume is thicker and thicker in the low rpm range from Idling to mid-range From then on, it is moderately restrained
Silencer had e4 (EURO standard) marking
When you remove the Baffle, the sound is powerful in the whole area It's a pleasant sound
For a sense of power, a power graph is available on the ManufacturerSite and It seems to increase peak power by about 3ps without any loss of medium speed
To be honest, I couldn't feel the difference in Power Torque is also no problem
Low priced Asia products are also available, but I'd like to install the real thing because it's my beloved car
It's a great cosmetic
View detail
I'm happy with the moderate volume
The OEM exhaust system on this model is quiet anyway, so you can get a good volume by changing I am satisfied with the result I did the installation myself There are no assembly instructions or translations (there is no Instruction Manual to enter here) I was worried about only Illustrator, but Screw's position in Exactly 3 hours The work was completed in about a week
The OEM Center Stand interferes with the OEM Center Stand, so I wanted information about not being able to use it together
The OEM Pannier case fits nicely without interference, as others have informed us
View detail
Things are great
My MONSTER S2 is a 2016 model and this exhaust system fits this one After 2017, the footpeg holder is a different type of footpeg holder and cannot be installed as is (I ordered it without noticing.) However, the angle and position of the inset diameter and Silencer fit, so I used KITACO's Aluminum I used a Bracket to fix it in place (The 150mm was JUST right.) The workmanship and accuracy of the product is great, although I gave it fewer stars because it took a little bit of work View detail
I like it very much
It is as light as the data It is so light that you can feel it just by stepping on it after changing it The turnaround time after running has also become light
Baffle is Quantity:2pc. Because the set is attached, it is built in together It is not an explosive sound, but a feeling of the pulse increases and it is pleasant
It sounded a bit like Ducati
The accuracy is good without rattling or being too tight
The Instruction Manual is not so kind, but if you see it, you will understand it I think it's strong
View detail
For those who want to be relatively quiet and customizable, Recommendation
There aren't many options for the external exhaust system for the Z900 to begin with, but The SCORPIONExhaust is the cheapest of them all System
The product arrives about a month and a half after the order is placed
I was waiting patiently for a product made overseas because I thought it would take a long time to deliver
No complaints about the packaging on arrival, all of it Well, that's what happens when you're out of the country It was sent in the expected state of affairs
The product is a Slip-on Silencer, so installation itself is very easy
Just remove the OEM and replace it
However, when it is installed as it is, the drain gas leaks from the joint, so it is necessary to prepare liquid gas I think it's best to keep it
The sound quality is a little lower than the OEM and the volume is not as loud
If you want to make a powerful sound at a reasonable volume, you should buy the Full Exhaust System I think
Also, Baffle was not installed
The Cell Keto Taper is an unusual looking shape, but it's not too bad
The Silencer of the short type is the same as the Z900's Compact Tail circumference and Match
The red frame of the end part is also very good
It's nice and matches the color of the car
I'm glad I bought it because I was able to change the look and feel of the replacement and save weight
View detail
It's tolerable.
I started to look for the shape (short taper) and material that I wanted to use, but I couldn't find any I found it when I looked at it in the dark It's not exactly what I wanted, but it's not bad, and it's in stock
When I installed it and ran it, it was quieter than the standard product and it was a little clogged up
As this is not a white surface, I have some knowledge about it, so I processed it right away 。
It's a little taut at low rpm, but the quieter it gets, the more you turn it, the more you can make the sound you want It is
It's a 90-degree?TWIN Sports-leaning motorcycle, but it has a fun low-rpm sound I am enjoying the ecstatic world of the sound that changes with the rotation and rise
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, TRIUMPH SPEED TRIPLE, SUZUKI BANDIT1250, SUZUKI GLADIUS650650, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX 1250 FA, KAWASAKI VERSYS1000, KAWASAKI VERSYS1000, HONDA CBR650F, HONDA CBR1000RR Fireblade, HONDA CB650F
It didn't fit
I bought it together with Silencer, but the bend was too tight to fit it
I think the bends are different from the product photo on the screen
I've never heard the Silencer's sound before, so I thought I'd try to make a sound for it in case I had to But
I was able to create the sound I had in mind by processing Small into the included Baffle
It's a classy?TWINSound that's never too loud
View detail
Pay attention to the volume and sound quality
It's going to be a hell of a lot louder
Use it in an environment where there are no volume restrictions
If you don't mind the sound, these items are inexpensive and lightweight
I tried Inner baffle etc. for Normal silencer, but the volume and output characteristics were not good could not be made to a satisfactory Level If you are thinking of removing the catalyst and sound deadening at the same time, you should install the Full Exhaust System Recommendation
Quantity of Pipe:Pair (for Left and Right) The gap between the two was a few millimeters too narrow, and we were finally able to insert it while holding it down with two people It looked more like a design error than a bad accuracy
View detail
I think it's well made for the price
Is the sound quality as good as it sounds?
And a bit of a compromise?
without Baffle is a bit of a stretch, isn't it?
Fitting is not so bad, but by changing the exhaust system It's a shame that the OEM Under Guard cannot be installed I am very happy with this product
View detail
Price suitable
There are no fasteners or anything on the exhaust pipe connections as mentioned in other reviews
Fortunately, there was no exhaust gas leak, but is this an individual difference of Silencer?
However, the place where Silencer is fixed is attached to the top of Silencer
I'm a little nervous because it's only 1 pc of Bolt on Plastic
I need to add the exhaust pipe fixing band. kijima 55~59 I'm considering installing an Exhaust Band
The sound is a little louder than the OEM Degree of change
Fingerprints that may have been left on the Silencer when it was packed were found here and there, so it was degreased is mandatory
If you don't like the look of the OEMExhaust System, this is a great product for you
View detail
Cospa good
I have a 390duke and need a decent sounding Large Exhaust System Then I recommend it!
Installation was easy, even for a novice like me, and I love that the Baffle is detachable!
There is no difference in volume between OEM and Large if you have Baffle, but if you remove Baffle It sounds so nice there! (Though I would be careful in residential areas in the middle of the night.)
But when I installed it, the screw holes on the exhaust system and the star were a little off It might be hard to wear
Other than that, I'm happy with it!
View detail
Very satisfied
It's easy to install and quick to install, which is good for Custom
Parenthesis is good because the sound is lower and the look is subtly reddish !
It's also good that not many people wear it and it doesn't look like anyone else
View detail
Fits: YAMAHA Tracer900GT, YAMAHA Tracer900
It's Large weird to install it yourself!
It's installed on the 2019MODEL To Racer 900!
I bought it because I like the design and the price
It was difficult to decide the position of the exhaust pipe
Because the accuracy between pipes is not good, there is a lot of exhaust leakage The liquid Gasket is indispensable The installation instruction manual was also rough It is thought that the shop should ask the person who is not confident
The exhaust sound is just right!
Best of all, Design is the best!
View detail
Fits: KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-636
Stylish and cool, and I felt empowered in the whole area
The exhaust system I was looking for was SCORPION I am very happy with it The sound quality and Performance is great Exhilarating to drive, great to look at! It would have been better if the exhaust system bore bore size was indicated No View detail
Fits: YAMAHA Tracer900, YAMAHA Tracer900GT
It's a good product, but..
Because I wanted to keep the price low, I chose the non-Full Exhaust System Type I just didn't know that the OEM exhaust system was a 1 pc thing I didn't check myself enough! (T_T) So I bought a cheap OEM exhaust system for the car inspection! After cutting the OEM exhaust system that was being used by sanding, I used Silencer installed! The work itself wasn't that much, but I had a hard time removing the Center Stand! Also, I was able to do it with someone who knows about motorcycles, but it's not possible for an amateur It is!
Anyway, I wish they had explained that part in the product description! You should! I was angry Then, I had to use the Full Exhaust System from the beginning! The Instruction Manual is also all in English version, so you can use the Thunder When I cut it, I was so close to the edge! ( ^_^ ;)
The product itself is good! The sound and texture are pretty good! I'm satisfied!
View detail
Cheap and good things
It was easy to install. Stainless Steel was cheap and good. Although the vehicle inspection does not pass, the sound was a satisfactory finish. Even with Baffle, I think that it is good with a sound that has a coherent bass sound. I was a bit noisy but I did it without Baffle. It feels good to feel the sound even through Helmet. View detail
Fits: YAMAHA N-Max 125, YAMAHA NMAX155
This is Parenthesis nice.
There is not much Review in Net and quality etc etc. I was worried, but I liked the shape, so I purchased.
The above anxiety was a concern __ ^ ^
The accuracy is also solid and there is no concern in terms of quality.
Although it is a volume of concern, Baffle (Removable) In the state with it was a Large fellow than I thought.
View detail
very nice
this SCORPION SERKET TAPER Slip-on Silencer very very very nice !!! i love this SCORPION SERKET TAPER Slip-on Silencer,thanks you!! View detail
Sound, performance, awesome with appearance
Purchase this from the classic Exhaust System considering the Exhaust System not found in FOR JAPAN MODEL.
Lightly, looks, of course, the sound is also wonderful Large fun satisfied.
As for the sound, it is Large, so be careful, although Baffle is attached, it is still Large.
View detail
Screw hole accuracy is ...
Since most external exhaust systems are Carbon or Titanium
Dare to choose the brilliant Stainless. The glaringly reflection of the specular surface is Beauty.
As the caliber is straight with a small caliber, so it's noisy but a good bass feeling berserk.
It is Manufacturer of United Kingdom but perhaps the manufacture is a rebound country
The accuracy of the Screw hole is poor, so even if one of the four holes of the attachment does not work, Screw does not enter straightly
I forbidden to tighten obliquely.
Baffle is so stiff (It will be a safety measure to prevent it from escaping due to exhaust pressure) Plastic hammer hammered with hanghang but the fixing Screw hole did not get too bad with this accuracy.
I finally pulled out with 556 and Pliers.
Do not use Baffle for this Exhaust System, when using the straight, it will be returned to the OEM at the time of vehicle inspection. And maybe you will not use it twice when you return it ...
View detail