Reviews
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
[Webike Monitor] Necessity was thought to sr with much vibration, and it purchased to it. Since an oscillating measure which is pure can be done, it is likely to be expectable. Let's attach, before the Stay of a favorite Muffler breaks!
[Webike Monitor] Necessity was thought to sr with much
vibration, and it purchased to it.
Since an oscillating measure which is pure can be done, it is likely to be expectable.
Let's attach, before the Stay of a favorite Muffler breaks!
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
It is famous good Simms's Chain case. It was felt quite refreshed from the pure fleshy thing.Although the Clearance with the Rear suspension attaches the Lowdown suspension by slight width, there is no interference. It corresponds t
It is famous good Simms's Chain case.
It was felt quite refreshed from the pure fleshy thing.Although the Clearance with the
Rear suspension attaches the Lowdown suspension by slight width, there is no interference.
It corresponds to a broad Rear suspension.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
Probably, these contents of a Set will be extraordinary at this price after all. The Muffler of the Motorcycle is custom-made できます, without breaking down the appearance appropriate for [ although exchanged for the first time / > / www
Probably, these contents of a Set will be extraordinary at this price after all.
The Muffler of the
Motorcycle is custom-made できます, without breaking down the appearance appropriate for [ although exchanged for the first time /
> / www
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
My SR was not suited although it may be based also on a model. Although metal fittings are attached to the mounting part ? of a Center stand, explanatory drawing writes by hand first? I understand and it was that of ず potatoes. The metal fittings, the B
My SR was not suited although it may be based also on a model. Although metal fittings are attached to the mounting part ? of a Center stand, explanatory drawing writes by hand first? I understand and it was that of ず potatoes. The metal fittings, the Bolt, the Washer, and color which act as Locke of the STAND are attached. This color was a situation where it did not enter between Stays for a long time about 5 mm. He thinks that he will do what, and it extends and attaches the stay part of a Frame forcibly helplessly. Although it can be used that it can use, since it does not act as Locke just, there is likely to be fear of omission. The conformity model etc. would like you to indicate details to a slight degree. View detail
Fits: YAMAHA SR400, YAMAHA SR500
Although it was the first Muffler exchange, it is a good sound as expected. It is not too noisy and is also likely to arrange an automobile inspection as it is. It is satisfied with the Beauty structure of details. It is recommended in a direc
Although it was the first Muffler exchange, it is a good sound as expected.
It is not too noisy and is also likely to arrange an automobile inspection as it is.
It is satisfied with the Beauty structure of
details.
It is recommended in a direction not to break down the Style of the
NORMAL into.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
[ -- the Webike Monitor ] -- since the Exhaust pipe of the same path was good, it used at this that it was pure. Since it is not a double tube if it compares that it is pure, it is very light. Since the Pipe is thin, appearance merely get
[ -- the Webike Monitor ]
-- since the Exhaust pipe of the same path was good, it used at this that it was pure.
Since it is not a double tube if it compares that it is pure, it is very light.
Since the Pipe is thin, appearance merely gets somewhat bad.
attachment of
attachment is [ short vehicles of the Stud bolt to 94 models ] possible without exchange of a Stud bolt also for the short vehicles of the Stud bolt after 95 models -- as (direction of a Flange is changed and attached) -- it has become.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Since I exchanged for the external exhaust pipe, a three-point stop was used just to make sure. I think that it is effective since it is a large motorcycle of vibration. The vibration after attachment decreases and it is good. In the case of the exhaust p
Since I exchanged for the external exhaust pipe, a three-point stop was used just to make sure. I think that it is effective since it is a large motorcycle of vibration. The vibration after attachment decreases and it is good. In the case of the exhaust pipe of the same length as genuine, the band and stay which stop an exhaust pipe and a muffler are fastened together, but it was somewhat difficult to insert stay in a band. View detail
Fits: YAMAHA SR500, YAMAHA SR400
"Since I wanted to attach simultaneous with the genuine rear carrier (type2) of SR, I purchased. A comfortable design may be used even when not having attached the side bag by a classical fender. I think that the reinforcement of a rear fender is improved
"Since I wanted to attach simultaneous with the genuine rear carrier (type2) of SR, I purchased. A comfortable design may be used even when not having attached the side bag by a classical fender. I think that the reinforcement of a rear fender is improved. Since it is interfered with the flasher of rear when the larger side bag was attached, I made and relocated the hole to the genuine bracket with the drill (refer to photograph). Since a transfer bracket is also sold from the same company, if you don't have a confidence to process, I recommend it. Although I feel it is expensive a little, considering the tool and pay of processing, I think that it is cheap. Sym'z Craft: rear blinker transfer bracket http://www.webike.net/sd/9737648/10001001. Although the back support of Kijima is used usually, it cannot be equipped with a genuine carrier (type2) simultaneously. For those who is thinking to attach simultaneously, please be careful only this point. (Although the spacer was forcibly attached together with a genuine carrier, back support has been distorted later) KIJIMA Saddle bag support: http://www.webike.net/sd/1678414/" View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
It might be an epoch-making product for who consider the move of a rear blinker to attach a side bag. However, there are two points to check before purchase. Since it attaches to the bolt position of the tail lamp side of normal, whether stay can be attac
It might be an epoch-making product for who consider the move of a rear blinker to attach a side bag. However, there are two points to check before purchase. Since it attaches to the bolt position of the tail lamp side of normal, whether stay can be attached with the motorcycle. How the affinity of the thread part of the cylindrical position and blinker of stay and the stay which attaches a blinker. There are some which the length of the thread part of a blinker is insufficient. These two points are needed to check. Since it is easy to rust on the character of a material in respect of quality and the measures against rain to wiring are not taken against this stay itself, a a measure may be required depends on a car body. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Since the exhaust pipe of the company was purchased, it purchased in order to use the same pure three-point stop. Although equipped by two points of head silencer stay at first, it is vibrating considerably also near an idol. Then, although a thre
Since the exhaust pipe of the company was purchased, it purchased in order to use the same pure three-point stop.
Although equipped by two points of head silencer stay at first, it is vibrating considerably also near an idol.
Then, although a three-point stop was used by the stay here, vibration is lost, and does not have most totters and it has fixed it with the firmly.
There is remarkable sense of security only in SR with much vibration.
Now, I think that a crack of stay is also lost.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Although the thing sent at the auction etc. was also examined, the amount-of-money difference was considered and the case here was purchased. Although it is higher than the thing which has appeared in the auction for a while, it is a good place that t
Although the thing sent at the auction etc. was also examined, the amount-of-money difference was considered and the case here was purchased.
Although it is higher than the thing which has appeared in the auction for a while, it is a good place that the case here is the specification which equips also with structure using a pure rubber bush color at best especially.
It is not too poor, and a design also has a pure twist and a light feeling and is right just.
External rear suspension is also a recommend also in the direction which can attach without a problem and is inquiring there.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Although many external exhaust pipes are fixation in two points of a flange and a silencer, it is adding here and is made to a three-point stop similarly pure in SR400. Although there is also a case where muffler stay especially breaks with SR by vibr
Although many external exhaust pipes are fixation in two points of a flange and a silencer, it is adding here and is made to a three-point stop similarly pure in SR400.
Although there is also a case where muffler stay especially breaks with SR by vibration, plentifully and I am running about 20000 K by adding this stay now, there is no crack of stay.
Since it is a rubber mount in which it is cheap and an attachment part is also equivalent pure about the price, it is recommended.
View detail
Fits: YAMAHA SR400, YAMAHA SR500
Since an inner is Steel, unlike a stainless, tone quality is a soft atmosphere, and idling sound is emphasized. It is a little larger grade as sound volume than the elegance corresponding to Peyton JMCA. It is also possible for a baffle end to rem
Since an inner is Steel, unlike a stainless, tone quality is a soft atmosphere, and idling sound is emphasized.
It is a little larger grade as sound volume than the elegance corresponding to Peyton JMCA.
It is also possible for a baffle end to remove, and to raise sound volume, since it is a formula.
Welding processing is also polite and it is a high muffler of quality.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
It is dramatically good. It is attached to this word. Although I thought that sound volume changed with each vehicle types, they were 97db in our SR (510 cc+TMR carburetor +RAM air cleaner). Since it was SR of the age of 99db regulation, it pa
It is dramatically good.
It is attached to this word.
Although I thought that sound volume changed with each vehicle types, they were 97db in our SR (510 cc+TMR carburetor +RAM air cleaner).
Since it was SR of the age of 99db regulation, it passed also along the automobile inspection satisfactorily.
Supposing it raises one worrisome thing, structure is too precise and a hang is a little needed for removal of the connecting part of an exhaust pipe and a muffler.
It is dramatically good except it.
Cost performance was also said and carried out, tone quality and a single engine pulled out merit, and running became pleasant.
View detail