Reviews
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
M Type Exhaust Pipe
I replaced it with this Exhaust pipe I was concerned from a while ago, Torque of the initial speed has increased much.
Easy to install, there is no exhaust leakage at all.
As the tube got thinner, I got better carburetor setting, it got better and better.
It is recommended if you like the appearance.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
Sym'z CraftShims Craft Classical Fender
It looks pretty good looking compared to other products, so it will be unnecessary to hide when you attach a Side bag. I bought it to prevent Bag's involvement in Tire, but now I am removing Bag. Although it is inconvenient, I use Backpack. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
When removing ChainMaintenance and Rear wheel ...
I bought it because it is troublesome to remove Exhaust pipe, Silencer one by one to attach OEMCenter Stand.
The exhaust system I am using is GreenBrowntechserfu.
I thought that it would be installed without removing the Exhaust System, but I removed a part of the Exhaust pipe and the Silencer because it did not work well on the Spanner.
Installation is very easy.
As it is also in OEMCenter Stand, it will be out of the time signature that moved, so let's lock the Front brake using Rubber Band, Tie Wrap, Belt etc..
How to apply STAND is similar to OEM.
This makes working easier.
(The picture is under installation)
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
I would recommend this bracket if you are planning to install an aftermarket header on your SR that does not have the factory style bracket on the pipe. This secures and supports the header to take pressure off the header studs on the engine.
I would recommend this bracket if you are planning to install an aftermarket header on your SR that does not have the factory style bracket on the pipe. This secures and supports the header to take pressure off the header studs on the engine. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Last year I ordered this chain guard for my 1978 SR500: I am on the east coast of America and it arrived sooner than expected and in perfect condition. It fit perfectly and it still looks good. Be aware that you will need a rubber grommet and steel spacer
Last year I ordered this chain guard for my 1978 SR500: I am on the east coast of America and it arrived sooner than expected and in perfect condition. It fit perfectly and it still looks good. Be aware that you will need a rubber grommet and steel spacer for the front mounting point (just like on the OEM guard). I would highly recommend this item. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
I'm almost satisfied.
Very cool.
OEM's unnecessary has gone, and the appearance has become clearer.
Even an amateur 's myself could exchange easily.
Other people are also written, but Minus is the place to divert OEM's Rubber parts.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Lighter appearance
Because the original Chain case was rusty
Replace with this product.
As an advantage
○ It became light even from the appearance.
○ Rusted for Stainless Steel.
○ Also supports Suspension exchange.
As a disadvantage
○ The gap with Sprocket stand out (The picture is 520 - 44 T)
OEM's thick steel Cover is also nice, but it looks light
This item is also good.
View detail
Fits: YAMAHA SR400, YAMAHA SR500
Shim's Craft Traditional megaphone muffler
I am satisfied with Large change.
The sound is as expected and it is a bit bigger than the OEM, or it is not a bomb sound
It's just right.. I purchased Slip-on Silencer this time, but I want to save this hand and get Hand Bent Exhaust Pipe.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
Finally arrived. It was a sound as expected.
The delivery date took about a month, and it finally arrived at hand. I am satisfied with the appearance also OEM-like and sound. It was an exchange from the OEMExhaust System, but it was a degree that AfterBurn got a little without carburetor adjustment. Personally I do not care much. Touring became even more fun. View detail
Fits: YAMAHA SR500, YAMAHA SR400
I like it ~
It was easy to install and I was satisfied with the appearance. It's cool even without Side Back. Because Seat fixed Bolt is used, it may be a little worrisome when desorbing Seat. View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Although about 30,000 yen will be usual if it is called an external Stainless M character Exhaust pipe, obtaining for 15,000 yen is surprise.Although it was worried about the quality of the article, it pushes and purchases the back that the Impression in
Although about 30,000 yen will be usual if it is called an external Stainless M character Exhaust pipe, obtaining for 15,000 yen is surprise.Although it was worried about the quality of the article, it pushes and purchases the back that the Impression in the direction of others was also popularity value.
attachment is also very easy.It compares pure after all, or it becomes and is light.attaching carefully, beginning to run and being burned in tens of km so that the
fingerprint may not be attached -- a color -- slightly .Simultaneous attachment also of the Muffler is carried out, and it is a Psycho exhaust sound!!
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Although it equipped with M character Exhaust pipe of the company, however it might fasten, during the run, the Nut by the side of an Engine was loosening immediately, and I was troubled. The Chatter sound accompanying slack and it of a Nut was also l
Although it equipped with M character Exhaust pipe of the company, however it might fasten, during the run, the Nut by the side of an Engine was loosening immediately, and I was troubled.
The Chatter sound accompanying slack and it of a Nut was also lost, and satisfied, after using this product.When changing to a
external Exhaust pipe, it is a product which should be purchased together.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
The M character Exhaust-pipe & Traditional megaphone muffler of the company, and simultaneous purchase.It remains unmoved, even if the Exhaust pipe can be fixed to a Frame similarly pure and it shakes a Silencer. It is also likely to become an osc
The M character Exhaust-pipe & Traditional megaphone muffler of the company, and simultaneous purchase.It remains unmoved, even if the
Exhaust pipe can be fixed to a Frame similarly pure and it shakes a Silencer.
It is also likely to become an oscillating measure if this much fixable?
View detail
Fits: YAMAHA SR400, YAMAHA SR500
Simultaneous exchange was carried out with M character Exhaust pipe of the company.Compared with the Triumph of the other company attached until now [ ], it becomes a considerably thick low tone color, and is large satisfaction. Since the Joint ga
Simultaneous exchange was carried out with M character Exhaust pipe of the company.Compared with the Triumph of the other company attached until now [
], it becomes a considerably thick low tone color, and is large satisfaction.
Since the Joint gasket of the KITACO did not simply take the post of the terminal area of an Exhaust pipe and a Silencer and exhaust leakage is carried out a little, a liquefied Gasket is likely to be needed.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
He wanted to change appearance as it is pure, and it is not a manual bending Exhaust pipe of the company, and dared to have chosen here.The curve of M character does not accumulate. I and a son are one article of large satisfaction.To what kind of
He wanted to change appearance as it is pure, and it is not a manual bending Exhaust pipe of the company, and dared to have chosen here.The curve of
M character does not accumulate.
I and a son are one article of large satisfaction.To what kind of wind is it burned? Although a baked color began to be attached immediately, starting the
Engine, it is pleasure when running more from now on.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
Attachment may also be easy and texture may also be refined. The back from width to the view became smart. There is no refuge of vibration, and I feel that it carries out to a Number or a Tail light, and somewhat individually uneasy, since a Rear fender
Attachment may also be easy and texture may also be refined. The back from width to the view became smart. There is no refuge of vibration, and I feel that it carries out to a Number or a Tail light, and somewhat individually uneasy, since a Rear fender will be firmly fixed to a Frame by a Stainless pipe as a result. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Although he bought an external Exhaust pipe, uneasiness to fixation -- Are such parts sold too? Although making is solid and safe, only a few becomes outside and interference of management of a Muffler only a Rear brake pedal and a few (it is -
Although he bought an external Exhaust pipe, uneasiness to fixation --
Are such parts sold too?
Although making
is solid and safe, only a few becomes outside and interference of management of a Muffler only a Rear brake pedal and a few (it is --, as it fell before and the Pedal had bent.)! The Pedal was reconstructed more highly and it became good for the time being.
View detail
Fits: YAMAHA SR400, YAMAHA SR500
A single cylinder and a peculiar sound may sound. It is since it is too quiet when pure. Since form was also looking for that of the Normal type, it is pleasing. Structure of details, a welding spot, etc. are made finely.
A single cylinder and a peculiar sound may sound.
It is since it is too quiet when pure.
Since
form was also looking for that of the Normal type, it is pleasing.
Structure of
details, a welding spot, etc. are made finely.
It is craftsman work.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Although it has mistaken, and it purchased by the Normal exhaust pipe and is not used, welding of the STAINLESS STEEL is craftsman work.
Although it has mistaken, and it purchased by the Normal exhaust pipe and is not used, welding of the
STAINLESS STEEL is craftsman work.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
At the time of a Touring, it purchased in order to carry out seat back fixation. Probably attachment will be easy. Can anyone do it? Although it looked unreliably in the thin Pipe, it did not break, even if it stacked and carried out the No.1 o
At the time of a Touring, it purchased in order to carry out seat back fixation.
Probably
attachment will be easy. Can anyone do it?
Although it looked unreliably in the thin Pipe, it did not break, even if it stacked and carried out the No.1 of Japan circumference of the load (it appeared in the sheet one third) of 10 kg or more as for which the maximum loading capacity of 3 kg exceeds.
View detail