Reviews
Ideal for changing the length of the shift rod
I bought it because I wanted to change the length of the Shift rod when I changed the position of the pedal
To begin with, STREET TRIPLERS has a Quick shifter It will be Standard Equipment, but Babyface's Rear Sets have a The Shift rod that came with the replacement did not take into account the Shift Switch I would like to replace the Shift Rod with one that matches the Shift Switch on it I found a Shift rod made by the Battle factory
I don't think it was originally intended to be combined with other companies' products, but the Large body vehicle The Pillow ball on the Shift Pedal has an M6 thread diameter, so it can be installed There was no problem
Moreover, you can choose the length from 80mm to 300mm in increments of 10mm to match your vehicle's specifications You can also choose the length you want to order according to the spec. of your vehicle
It should have been ordered by the Manufacturer as Repair Parts This is the only product sold as a universal product There's only one, so you can save yourself the trouble of ordering
Personally, I trust the fact that it's made by the Battle Factory, a familiar name in road racing Factor
However, as you can see in the description, it is a product that only cut a screw hole in the hexagonal bar of Aluminum (see ROD's Center is cut-out, but …) is 1 pc2, It's a bit awkward to spend more than 5,000 yen, or 3,000 yen for a long rod Other companies' Shift rods are sold for around 1,500 yen, so if the length is right, you can buy a different one There are also cheaper products at
Also, since this is a function-first product, it is only available in the bare aluminum color Recently, the number of footpegs painted by Anodized is increasing, but Shift rod If your shifter is painted as well, you may find that the shifter rod is more noticeable as shown in the picture The original color of the Shift Rod was Black
View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA NSR mini, HONDA XR100MOTARD, HONDA NSR50, Others
Non-slip and cheap
[Installation, Accuracy]
I bought it as Repair Parts for the other company's Rear Sets, because the screw diameter is M8 of course For use with a wide range of manufacturer's footpegs There is no looseness due to vibration
[Shape and feel]
There is also another Review is very slippery in the rough Knurl process of Knurl, once you use it, you can use other I can't go back to Footpeg lol
That's why the Boots are depleting so much …
[Quality/Cost performance]
The DURACON part of the tip looks like it has a slider effect, but once it falls over LargeIt's actually Conforms to Japan Race as it caves in behind the bar I thought it would be better to think of it as just a Cap for Regulation
It is cheaper and less slippery than the other companies' Footpegs, and the practicality and cost effectiveness are I think it's a good idea
Most of the other companies' products are Anodized Color and will come off after riding Battle's products are basically Aluminum Ground bare skin, so you don't have to worry about the color baldness Also
View detail
It's normal
Personally, I don't like the plain old Bar End, so I used KIJIMA's But because I wanted to make the end shorter in combination with Grip, I installed it If old-fashioned Racer is preferred, it is Recommendation However, whether it is expensive View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
I'm so cool!!!!!
Case cover made of Kevlar Fiber
It's so cool
If you install it as it is, it will crack and go away when it falls over, so the Double- it was installed with sided tape
In addition, I used instant glue to protect the cross-section of the fiber as it may peel off or grow moldy if it gets dyed by water re
View detail
Fits: HONDA CBR1000RR, KAWASAKI NINJA2 Helmet50RR, HONDA RS125, HONDA RS250, HONDA NSF250R, HONDA CBR600RR, HONDA VTR250, YAMAHA YZF-R1, YAMAHA YZF-R6, KAWASAKI ZX-6R, SUZUKI GSX-R600, SUZUKI GSX-R1000
I'm a cosmo!
I'm using my WR250X for road race with North Line Rear Sets. It is. I bought this product from Repair because the Footpeg is always damaged when it falls over.
It feels fine in use and grips without slipping in a little rain.
I can recommend it because it's cheap.
View detail
Fits: HONDA CBR600RR, KAWASAKI ZX-6R, SUZUKI GSX-R600, SUZUKI GSX-R750, YAMAHA MT-09, YAMAHA YZF-R1, YAMAHA YZF-R6, HONDA CBR1000RR
Good product
The welds are very good and the weight is relatively light and easy to use
I've used other companies' products a few times before, but so far I like this one the best
Material:Stainless steel and looks durable, so it will work for the time being
The wheels are poorly made with plastic-like material
If you're concerned about it, I'd be happy to replace it
View detail
Purchased for use with the Footpeg Plate
Footpeg Plate was installed on a 2006 Kawasaki ZZr250
I bought the 170mm of this product because the Change rod that came with it was too short
View detail
It was as good as I thought it would be
I installed it and it felt good, but now I'm waiting to remove it and install it on my other motorcycle It would be even better if the price was a little cheaper, but it will be difficult View detail
Fits: HONDA CBR1000RR, KAWASAKI NINJA2 Helmet50RR, HONDA RS125, HONDA RS250, HONDA NSF250R, HONDA CBR600RR, HONDA VTR250, YAMAHA YZF-R1, YAMAHA YZF-R6, KAWASAKI ZX-6R, SUZUKI GSX-R600, SUZUKI GSX-R1000
Large strange good!
I am using Rear Sets manufactured by another company, but since Footpeg wears down, I replaced it. It feels like Knurl gets caught coarse! After that we feel that water does not collect well in the longitudinal groove and the rainy day!
When you exchange again it is a rule to kore!
View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA CBR600F, HONDA VTR1000FVTR1000F FIRESTORM, HONDA CBR400RR
Moderately
Immediately after arrival, wearing. Although it is written in the explanation, since it is universal, the hole for the anti-rotation must be processed additionally, but it can be poured.
Handlebar itself is light, texture is not bad.
Since the hanging angle is different from the OEM, it comes into contact with Cowl, so adjustment of that side is necessary.
View detail
I am satisfied with the appearance as well as the texture!
I also considered other Manufacturer's items, but I chose Battle factory's.
I am satisfied with the products as expected.
Delivery date arrived at hand as soon as possible about 1 week from the schedule.
View detail
footpeg for position change.
When buying Set Back Plate on footpeg, because it is not long enough to purchase.
Texture is good.. Assembling is 10 mm, but as the Asahi FlareWrench could be used it is Recommendation. FlareWrench is harder to lick with force than Spanner.
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX1300R Hayabusa, KAWASAKI ZRX1100
Fender caught a little
Put the square under the Side Stand, bring the Motorcycle close to horizontal and hook the hook.
Then, the STAND slightly interferes with the tip of the Fender that is stuck with the OEM.
You can not set STAND unless you force it to push Fender away.
Fender Eliminator Kitetc. Although it seems to be an unrelated problem to the person who is making it clearer, it seems that it seemed to interfere a little bit with De Fault's GSX 1300 R HAYABUSA.
But Body is quite lightweight and easy to carry, so we are satisfied because the operability is also Outclassing.
View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA NSR mini, HONDA XR100MOTARD, HONDA NSR50, Others
It is highly appreciated
It is the shortest bar among a number of Footpeg BarManufacturer, it is 10 mm shorter than last time, it got better not to slip and get caught well, it is easy to get on, Bolt size can be attached to other footpeg, if it is short after installation If you feel it can be adjusted with Color, high quality at low price View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R1000
Performance is limited to not testing parts.
If you remove Cowl, installation is easy with Torque wrench.
In case of myself, the pedestal of the other company 's Clutch cover of Left overlapped a little, so we added the attached Washer + one more thicker Washer
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R1000
It was not Bolt-on.
In reality, the dent under the photo (Shape to avoid other Bolt's head) However, it was not retired and it was connected.
Since it can not be helped, I figured out that I scraped the gorillor with a round file, but the material is durable.
View detail
Fits: KAWASAKI Ninja 250R, KAWASAKI Ninja 250R
Functional, exceptional storability!
We are looking for a Front stand that does not take up space for storage because it is being maintained at the bicycle parking lot in Apartment.
Although I did not understand how to use at all in the photograph and the explanatory note of the product page, since it was said that it was able to be used without problems with the Impression of others, I bought it with a half-trust.
Even if it arrives, handling Instruction Manual was not attached either. Anyway, when I apply it to Motorcycle, I see.
With the middle stick in the hole of Stem, lifting it on the principle of Lever, the part of the foot naturally supports the upright foot support.
It takes a little power when lifting, but it is enough for function.
Material : Because it is Stainless Steel, I do not seem to worry about Rust.
When used in conjunction with Rear stand, stability feeling seems no problem.
You will be able to exchange Tire and Front fork as well.
I feel that the price may be a little cheaper, but I think that this is only Compact, no other functional one.
View detail
Good product
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
Good Design
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
Simple STAND, but finishing, ease of use, arrangement is wonderful.
Used for Warmer winding and Wheel exchange in Circuit.
Transporter got Small, I was suffering from loading, so purchase this product.
Simple STAND, but finishing, ease of use, arrangement is wonderful. Finish beautifully light. Transportter loading is preeminent because its dimensions are Compact.
The disadvantage is stability. Is stability feeling inferior to Large width in Roller type
Let's do until Wheel replacement.
Well, this Type is useless.
Also, the insertion point, the accuracy of the boss is too high Requires kitchen wear.
Those who are considering purchasing please check the system of the insertion mouth well. I can not use it because of a systematic difference
View detail