Reviews
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
DAYTONA AdjustableSTAND
I use it for REBEL 1100, but I feel uneasy when using Single Body because of its heavy body.:Once the Set is complete there is no problem. I am currently using it with STAND in the Front tire lock. View detail
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
Some parts are pricey, but no problem.
Chain and Wheel cleaning was inconvenient and price.
Buy this one which is Reasonable.
Assembly is required, but the height can be adjusted without any problem. The Hook and the Adapter for direct use of the Swing Arm are included from the start. I purchased a ZETA Swingarm Spool at the same time and used the Hook for its stability.
When using the STAND, hang the vehicle straight with the front brake applied →STAND on the Hook →STAND rearward tip down, and you are done.
Note that there is no Cover on the Hook, so I made a mistake at first and damaged the Swing Arm as much as I could….
There is no wobble, and the feel is satisfactory. Above all, I am satisfied with the maintenance performance of the Large width up.
View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
Just right for REBEL 250
I used it on my REBEL 250. It was very useful for my daughter, who just got her license, to practice clutch and gear changing, and for maintenance afterwards. View detail
Very easy.
I watched the official YouTubeChannel to prep it and it was very easy to use. Car wash and Chain Shiko are very easy. It is so easy to use that I wonder what I had to do with the Roller stand until now. If you wash and maintain your car frequently, this is a must-have item. Additional purchases are a V-receiver, a thing to keep the front brake lever pulled, and a bush to attach it to the car body. I purchased the "Helpful Rubber" as an insurance policy, but it has not been opened yet and has not been used. View detail
During maintenance such as Wheel, ChainMaintenance, etc.
I purchased Maintenance Stand for the first time and used it for the first time.
To be honest, it was my first time. Will it lift properly?" And "Why don't we take down Motorcycle?" I was worried about a lot of things, but it was surprisingly easy to Quantity:Set is ready.
It may depend on the person, but you can put something thicker on the Side Stand from the beginning to keep the Motorcycle straight and Quantity.:I think it would be easier to Set.
I am concerned that the Gold price is too high and that the Hook will be damaged because it directly interferes with the Hook, which is unavoidable.
View detail
Additional purchases
I purchased the Hook originally for maintenance etc., so I purchased only the Body.
I am satisfied with it because it will be useful for Large change if it is available.
View detail
Used for Dax125
I use it on my Dax125, 12inch size and I was wondering if it would be Large sturdy, Large is Reasonable and I was worried about the quality, but it was no problem at all. I was worried about the quality, but it was no problem at all. I would like to consider the for Front next time. View detail
Slightly disappointed.
[How is it used?
Used in YZF-R6 (2019) with V-receiver.
I am new to buying Rear stand but have rented a Short from J-TRIP.
Was the one you received as per Image?
It was heavier than I expected, but not a problem at all.
The large size was as shown in the image, but it is still large compared to the short size.
How was your experience with it?
It is easy to raise and lower, and although I was worried about the short version, I made the right choice by choosing the long version.
However, even with Short, Stand for Beginner was easy and did not require much strength.
The screw holes are too large or the bracket is wobbly even when the bolt is tightened firmly.
[Points to note]
In the case of the V receiver, even at the lowest setting, it floats about 4 cm, so a little force is required to raise it.
If you want to raise it with light force, it is better to choose Stand for Beginner because Stand for Beginner will be in a lower position.
View detail
Basic form of Garage maintenance
Quantities that are the very basics of home maintenance:Set would be this one.
Until now, I had been using a maintenance stand from another company, a type with a short handle, but it had become quite damaged, so I decided to buy another STAND made by JTrip.
First of all, it is not suitable for loading on a Transporter because of its long handle. (Probably the Tailgate will not be able to be closed.)
However, if it is to be used in a Garage with a maintenance Space, the handle should be long enough.
It is very easy to lift up with very light force.
I wonder if Small students can do Lift with the help of Small students.
It goes up that lightly, so those who are not confident in their arm strength should not worry.
The Roller also turns lightly, and the Roller is very stiff, yet Material:Since it is Rubber, Material:The feel is better than other companies' products using Plastic's Roller.
It is also quiet and luxurious.
And the reason why it has been highly supported by users for many years is because it has been designed with motorcycles in mind.
Although simple and straightforward in construction, it is possible to bring the receiver to an excellent position, resulting in a great user experience.
TDM900 is a normal Rear 17in. but with the height adjustment at the bottom of the Quantity:When set, the amount of Tire Lift is only about 2 cm.
The tire replacement is easy to do because it has hardly been raised, and above all, it is very light to apply STAND!
If you have a place to put it, I would definitely recommend it, and I don't think there is any point in buying a Type with a short handle if you are stingy with the little space you have.
For the main driver of the Circuit who wants to use it when loading a transporter, a shorter circuit would be better, but how many of you do that?
Normal people are definitely Koch.
Besides, I don't need STAND when loading the Transporter.
View detail
J-TRIPSTAND
I purchased this product for ZX-25R maintenance.
I was confused between Short and Long Type,
I am happy with Long Type.
With Long, it is quite easy to lift with little effort.
Recommended
View detail
I'm glad I bought it
Spec. applications are mainly Oil replacement and Chain cleaning.
Since my motorcycle is a ninja1000, I decided to use an L-shaped catch because I heard that a V-shaped catch will scratch it, as per other reviews.
This was my first Maintenance Stand, and I was able to do the initial raising operation with no worries at all (although caution is required).
In my case, in addition, I place a board or a brick under the STAND, keep the Motorcycle as vertical as possible, and press the Maintenance STAND firmly against the Swing Arm with my hand. Then, the MaintenanceSTAND is placed firmly against the Swing Arm and pushed by hand.
It goes up easily with a simple "goo". When lowering, it can be lowered slowly with the same momentum.
It may be a good idea to lay down a tan balletc. since the area in contact with the ground is prone to scratches.
View detail
A must for maintenance
First of all, note that Body alone cannot be used, but requires the receiving Bracket.
Also, some receiving brackets may not be used for certain types of vehicles, so make sure you buy the right shape for your motorcycle.
The Rear Stand is essential for various maintenance around the Rear area from Chain cleaning, and it is also necessary to keep the Rear Stand upright for work using the Front Stand.
NarrowSTAND would have been better for 250ccClass because the Tire is not thick enough.
I used to have NarrowSTAND, but it is slightly more compact in size.
There are no complaints or dissatisfaction with the quality and usability of the product, which is the quintessential J-TRIP.
Gold amount is slightly higher than others, but I have never heard of J-TRIP's STAND breaking, so I think it is possible to buy it for a lifetime.
View detail
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
With a sense of security.
A cheap Chinese-made product can be bought for about $2,500, but the Motorcycle you are lifting is over $2,000,000.
This is not a place to be stingy.
It's a small price to pay considering the cost of hundreds of thousands of parts when they fall down.
However, the U-shaped Hook fails because there is no Coating and it is in the Swing Arm.
I put a scratch in it.
View detail
J-TRIP for peace of mind
I have been using J-TRIP STAND for more than 20 years and this is the third one I have used. I bought a new GSX-S750, so I decided to go out on a limb and buy the Plating type. I bought the plating type because my 20 years old model has some rust on it.
If you feel uneasy when using the Rear Racing Stand, you can safely STAND-UP the Rear by using the Wheel chock for Front.
For the front wheel chock, the GSX-S750 uses a made in USA product (BAXLEY TRAILER. There is no problem to stand it upright with Astro, but it is dangerous to use it with a single body, so please use it with the Racing Stand for Rear.
View detail
Fits: HONDA MONKEY, HONDA GROM, HONDA MSX, HONDA APE, HONDA MONKEY125, HONDA DAX, HONDA CHALY, HONDA XRMOTARD, HONDA CT125CT110 HUNTER CUB
Lightweight and just right for groms.
It is tiny and ExactlySize for groms.
I just put Swing Arm on it, but it is stable.
(Caution!)
Normal rear fender will cut your finger on the License Plate if you are not a little careful.
I will try Fender Eliminator one of these days.
View detail
ChainMaintenance seems to be progressing.
I had been using DAYTONA's Easy Lift Up Stand for chain maintenance, but I found it difficult to maintain the chain because it is inclined toward the chain side and there is an exhaust system, so I purchased the Rear Stand.
I was torn between Short and Long, but chose Long because STAND beginners prefer Long.
In fact, I have used STAND, and it can be used by one person, and the chain position is slightly higher and more vertical, so I think I will be able to make progress with my chain chicos.
The way to hang the stand is on youtube.com, but by fixing the front brake and cutting the handlebar as far to the left as possible, and inserting a piece of wood about 4cm thick under the side stand, the motorcycle will be close to vertical, and the stand can be hung by a single person.
To remove the STAND, make sure the SIDE STAND is out, clear away the wood, and remove the STAND from the RIGHT rear of the Motorcycle while supporting the Motorcycle with one hand.
When applying STAND, I think there is no difference between Short and Long, but when removing STAND, Long is easier to hold and lighter to remove, so if storage space and space permit, I would recommend Long.
View detail
I'm concerned about rattling in the adjustment area.
Although it is a Short Type, it could lift about 220 kg without any effort.
I think Large people will choose Bobbin type, but VPlate is more stable and easier.
I wonder if they dare to do so to make it easier to match, or if the rattling of the adjusting section is Largekiku rattling.
If you bite a piece of wood on the Side Stand to keep it almost upright, and then stand on the Right Side and hang it with your foot, it will not rub off.
Once purchased, it will be semi-permanent. It will expand the scope of maintenance, so if you are not sure about it, buy it.
View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
DAYTONA
I'd like to see it built a little sturdier. View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
Not suitable for REBEL 1100
Instruction Manual is unfriendly and difficult to understand.
The receiver is not stable due to rubber.
Not suitable for heavy motorcycles.
I almost knocked it over.
View detail
To improve maintenance efficiency
I purchased this manufacturer's product to improve the efficiency of maintenance of the Large model. The best thing about it is that the word-of-mouth is good, the feeling of using it is good, the feeling of putting a motorcycle on it is quite nice, and above all, the adjustment of the chain and rear suspension is easy to clean, so I am glad I bought it. View detail