Reviews
Used in 790DUKE's Rear blinkerCoupler
Things work fine.
However, it is not possible to crimp cleanly with ordinary Electric Works Pliers.
2.You will need Electric Works Pliers that can caulk 0mm
View detail
Useful to have but the price is Neck.
Because I often use WaterproofConnector to make wiring, I buy this as a spare.
The price is quite high, but it's a Recommendation because it can be used for the Coupler Wiring process of the Waterproof system.
View detail
Fits: その他 For 4-5 inch Bates type headlights
It's a simple connection and a Recommendation!
Used when WR250X is Number PlateSpec. and made into 2 PIAA fog lights. I didn't want to process the 6V MONKEY/GORILLA Main Harness side. I chose this product because it's a great product.
There are other manufacturer's products, but DAYTONA has a sense of trust and security, so I chose.
It's easy to use. If there's a product like this itchy product available, it's cleaner and faster to use than to make your own. So it is Recommendation.
View detail
Fits: その他 For 4-5 inch Bates type headlights
Easily installed with external headlight kit without cumbersome wiring process
The LED Headlight Kit is the OEM H4 Easy power delivery from the Coupler means that the OEM's Harness can be powered easily without modification and without It is possible to install the electrical components without having to do that stingy, abominable wiring process
If you're sloppy but want to put it on nicely, Money is the solution
The coupler of H11 is the same shape as the H4Coupler, I think, and there is only one Plus line I think it was so different that it wasn't, so I think it can be diverted
View detail
It is easy to use
It is safer to use a double coating for power wirings
I often use it because it is easier to handle than Colgate Tube
φ8 Tubes 1.25sq wire Quantity:The 2pc can easily pass through
Photo from Battery (1.25sqxQuantity):(2pc) I'm going through Wiring
The M6 Hoe Type Terminal can be threaded with it attached
It is just a PVC tube though it is for wiring, and there is no indication about the pressure resistance and heat resistance
It would simply protect the wire from mechanical rubbing, etc
How manyQuantity in the toolbox, as it is ready to use when needed and the 2m is used up quickly:These are the Parts you'll want to set or prepare
View detail
![Connector [for Business Use]](https://global.webike-cdn.net/photo/impression/3d/3db044ceb446b75f1d0a73978ebcc8c5L.jpg)
Please note that terminals are sold separately
Purchased for use in Attachment Electric Wiring
You can buy them in a pack of 10 at a discount, but the terminals (Bracket) are sold separately
If possible, the terminals are also Quantity:I'd like to have it set
View detail
A strong view of the DIY crowd
When you start obsessing about DIY too, Harness will want to use OEM colors
I have an old motorcycle Harness and other items in storage, but that's still the purpose of the bike This kind of assortment is a big help because the colors are not available in the
View detail
If you want to branch out, this is it!
Plus Sometimes you want to split the power supply, right?
I think there are a lot of people who use Large bodies, like that red-packing thing
If you can pressure weld them yourself (not hard), you can use this one to branch out, which is handy!
However, if you don't use it, it will be empty and dangerous if Minus touches it
View detail
If you want to branch off, branch Bullet Terminal and this!
DAYTONADAYTONA:70803
Ca/Cw 104 Type Double Plug Pin [for Business Use]
I bought this for use in
I don't need 100 of them (laughs)
Sometimes you want to use them in a branch, so Bullet Terminal and Quantity:It is available in sets
But it does take up a lot of width, so my rating is a little low!
View detail
Wiring interrupt
OEM Harness doesn't want to hurt, but due to a rather niche demand for interruptions Purchased in
There are no problems with the shape and the OEMConnector connections are solid
The terminals are well made
It is very helpful to have these terminals readily available
View detail
For a little customization
It was used to make Harness to get power from Tail lamp
If it was true, I wanted to change the color of each Cable to match the OEM, but when I collected each color, it was too much of a surprise It's expensive, so I decided to go with just red
Performance-wise, it's good enough for a little crafting!
View detail
Good tool
This is made in Taiwan. Although the color is not gold, I think the quality is better than the Thailand one since I bough the Thailand one before. It is useful to repair / change the wire. I like it. View detail
Different from the image
I purchased the product based on the product image, but it comes with a different item than the image I checked my email and found out it is a 2-pole coupler The picture is 3-pole but there is a description "2-pole" at the bottom of the page 。 incomprehensible 。 image fraud 。 You shouldn't put another picture on it If you don't have a picture, you should sell it without one If you know the part number, you can look up the product 。 If you're going to put a description, you should put the product name and part number on the top page But not a picture 。 regrettable 。 View detail
Active in organizing wiring
Bullet TerminalWiring on the external meter is colorful and stands out I used it for the purpose of warding off the eyes and wiring organization and waterproofing
Wiring can be put together with Harness tape or self-adhering tape, but there are some defects You'll have to remove it every time you check your wiring, which is time-consuming
The ConnectorBoots cover allows you to simply slide it off, making it easy to check And there's no chance of the tape losing its adhesive power and rewinding
There are several sizes and the price is not too high, so it is useful for organizing wiring in prominent areas
View detail
Diverted to License Plate Light, Exactly
Originally, the LED Blinker of the retrofit Other Brand Product, Bullet It was TerminalJointConversion Harness, but The internal cleaning and angle adjustment of the OEM Blinker solved the problem I bought a refurbished Bullet Terminal modified version of the GSR750 to stock I bought a used GSR750 with a Fender Eliminator Kit on it It is back to OEM, but Wiring is processed Right Side is License Plate Light This is an extension of the middle of Harness in It shouldn't be there originally
It's too long and disturbing I used this and reconnected it and made it short and refreshed I thought it was something to try
View detail
good
I do not know where to put in the Connector at first,. By chance I also missed one and worked in turn referring to it. I'm glad I bought it. View detail
DAYTONA Blinker Connector (2-poles) Set
Hello . I want to share a review about the purchased product. I bought two pairs of connectors for rebuilding the damaged wiring. Installation was quick and without any difficulties. The quality of the goods is excellent, as is the case for the original parts. I will buy more and recommend it to everyone. Do not regret what you buy for your motorcycle. I wish the seller success and all the best. Thank you . View detail
DAYTONA Blinker Connector (2-poles) Set
Hello . I want to share a review about the purchased product. I bought two pairs of connectors for rebuilding the damaged wiring. Installation was quick and without any difficulties. The quality of the goods is excellent, as is the case for the original parts. I will buy more and recommend it to everyone. Do not regret what you buy for your motorcycle. I wish the seller success and all the best. Thank you . View detail
DAYTONA Blinker Connector
I bought this pair of connectors for rebuilding the damaged wiring received after the accident. Installation was quick and easy. The quality of the goods is excellent. The real Japanese quality of the original parts for Suzuki motorcycles. I will buy more. I recommend to all . Do not regret what you buy for your motorcycle. I wish the seller success and all the best. Thank you . View detail
As I thought
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail