Reviews
Fits: HONDA PCX125 JF56, HONDA PCX150 KF18, HONDA PCX125 JF56, HONDA PCX150 KF18
Exhaust System replacement
I replaced it with YOSHIMURA's Exhaust System to see if it would have some effect. I was surprised to find that the overall acceleration was smoother and more effective. View detail
Bright!
The OEM was dark, so we replaced it with a new one and the custom feel is improved.
[Color] I chose Smoke and it is not too Black.
View detail
Second car inspection
On the second inspection, I brought a NORMAL one with me just in case.
Vehicle passed inspection.
Maybe it depends on the workers?
View detail
Focus on cheap and durable.
Focus on cheap and durable.
[How is it used?
After spending about half a year with hanghang and restore&customizing the LITTLE CUB that was given to us, we decided to equip it with comfortable equipment next. First, we need an external power source. I decided to buy a USB power supply and a Mount bar from another company. Longer would be better than shorter." and repurchased Mount bar because it was longer than expected.
I wanted to make the Handlebar area a little more Refreshing, so I looked for a shorter bar and repurchased it.
How did you like it?
Short type M-SOULMount bar made of steel is very rigid and does not bend or deform even when driving on local dirt roads and holds the Power Supply Socketetc. firmly in place.
I've been installing Mount bars on every single car I've owned recently. It's boring to have the same products all the time." So, I spend my days searching Webike's product introduction section for products that are cheap and look good.
How did it compare to other products?
Before purchasing this product, I had purchased and installed a short bar from another manufacturer, but it was longer than what I had imaged, so I had to repurchase it this time.
If I wanted to fix various objects, the product I purchased last time would have been fine, but in my case, the mount bar was longer than expected because I only planned to install one or at most two objects, and the handlebar around the handlebar was not refreshing.
The length of M-SOUL's Mount bar was exactly what I had imagined, so I was satisfied that it was relatively Refreshing and cohesive after installation.
[Points to note]
The type is fixed with Mirror and clamping, so you can set the quantity to a position that is easy for you to use.:Once set, please tighten each part firmly to fix it in place. If it loosens while driving, it will cause a petit panic. (This is a testimonial.)
Other items that would be helpful
The deciding factor in the purchase
In addition to being Compact and Short Type for my purposes, the relatively Reasonable pricing was a deciding factor.
【Included Parts:presence or absence】.
The Mount Bar Body is an easy-to-install product with no assembly confusion because the mounting bracket is integrated with the Mirror Holder.
[ITEMS TO BUY TOGETHER
Products to be installed on Mount bar.
If you have not yet purchased the products you want to install, such as a power supply outlet, Smartphone Holder, Drink Holder, or Camera Mounting Holders, you can make a quick progress by purchasing them at the same time.
Opinions and requests to Manufacturer.
I suspect there are a lot of people like me who want a super Short Type Mount bar.
From now on. Good products at affordable prices. Thank you in advance.
View detail
z900rs cafe handle up
z900rs cafe installed this handle.
When traveling long distances, the posture is comfortable.
The included clutch cable and throttle cable fit well.
However, the brake hose must be extended.
I installed it with a swage line.
A comfortable posture makes your trip more enjoyable. -------------------------------------------------- -------- Z900RS CAFE installed the handle. When traveling in a medium to long range, the posture is comfortable. The enclosed clutch cable and throttle cable fits well. However, the brake hose must be extended. I was installed in the Swage Line. The trip is more enjoyable in a comfortable position. Powered by Google Translator
View detail
Fits: YAMAHA SMAX, YAMAHA Majesty S, YAMAHA SMAX, YAMAHA Majesty S
Slide Piece
Ride quality has improved.
Good acceleration and good around to Top.
The Slide Piece is easy to break, but it is a Single Item and there are no Parts, which is disappointing.
View detail
Fits: YAMAHA N-MAX, YAMAHA NMAX155, YAMAHA N-MAX, YAMAHA NMAX155
great accessory
My motorcycle is a YAMAHA NMAX155. After driving this car for more than a year, the transmission part feels that the vibration has become larger and the acceleration force is not enough, so I bought this M-SOUL LEVEL10 RACING high-speed pulley kit on webike. It can increase the top speed of this car and reduce the vibration when starting. The actual experience is better than that of the original factory, and the top speed can be increased by about 10KM/hour. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. After more than a year of driving, the transmission part feels that the vibration has become larger and the acceleration is not enough, so I bought this M-Soul Level10 Racing high- speed Pully disk kit on Webike. It can increase the speed of this car and reduce the vibration of the startup. The actual experience is better than the original factory, and the speed can increase by about 10km per hour. Powered by Google Translator View detail
Fits: YAMAHA TMAX 530 15 reimported SJ091, YAMAHA TMAX 530 15 reimported SJ0092, YAMAHA TMAX 530 15 SJ12J
Can be installed on YZF-R1
I bought it thinking that since the shape of TMAX530 and Tail are the same, it would be possible to install it as long as the wiring is modified. I bought it because I thought it would be possible to install it if only the wiring was modified.
As a result, it could be installed without any modification to Wiring; it can be used by connecting it directly to the OEM Coupler.
In the Position (except when braking) state, the LEDs on the surface emitting Type light up, and when braking, the surface emitting part and the 6 LEDs placed in between light up. It is bright and nice.
The previous Type was not equipped with 6 LEDs, so it was dark and dangerous even when braking, but this product is very easy to see and safe even when braking.
There is a type that also has an embedded Blinker, but this type is not equipped with a Blinker and must be installed separately.
Flattering 4C8 R1 that's not a new Motorcycle anymore, but it's a little younger. lens too. [Color] With Smoke [Color] I like the fact that Clear can be selected. [Color] Smoke makes the atmosphere a little worse (laughs).
View detail
Transmission filter
Very good design and good flow.. sits firmly on to the cvt.. comparing to other brands, level 10 filter does not have sponge that will get flaky after the prolonged exposure to heat from cvt.. highly recommended for all Tmax View detail
I like the product but it did not pass inspection.
I recently had my car inspected and the inspector was detailed and diligent.
It did not pass inspection. I had to change it back to NORMAL to get it inspected.
There are some who have attended.
It's a shame
The reason was that the Position light was OK, but the Brake light did not have enough light area to pass the inspection.
By the way, I was meticulously measured by MAJOR.
View detail
Compact, but pricey!
[How is it used?
It is used on a 5-inch CYGNUS X. This Mount has a Smartphone Mount attached to it.
The Smartphone Mount uses SP CONECTO from DAYTONA.
Was the one you received as per Image?
I have the impression that I received something with a Beauty finish rather than an Image finish (laugh).
To be honest, I thought the quality looked really bad from the product images.
The paint itself was beautifully finished, with weld marks and other marks clean, as if it had been improved.
How was your experience with it?
I am satisfied because it is very Compact and as close as possible to the shape I wanted.
The compactness of the mount is good, since a bulky mount around the handlebar is tacky for a scooter.
The strength seems to be OK, and since it is 22.2Φ, I think it can mount most large items.
[Points to note]
Nothing in particular, but if you mount something too heavy, the smallest size& fixed point will be at the edge.
I don't think you should mount anything too heavy in terms of Size.
How did it compare to other products?
It is Steel, so it is by far the strongest. I wanted something cheaper, so I searched quite a bit.
All the cheap ones are Material:I am still concerned about the strength of this product in aluminum.
However, I can live with it because the product is good, but I think the price is too high for this product.
Conversion collars can also be purchased cheaply from KITACO or Posh, so there is no need to go out of your way to get one with a color.
View detail
Musashi (former Japanese military governor turned daimyo)
I am 200% fit to the Riding position of Z900RS myself.
I have the most comfortable posture ever!
I can't find a comfortable Handlebar other than this one at the moment!
View detail
Good to look at
Installation is easy if you have the right tools.
It looks so much better.
I chose the Clear type, so it's good to have the crispness when it lights up.
View detail
Fits: KAWASAKI KH400, KAWASAKI KH250, KAWASAKI 350SS, KAWASAKI 400SS, KAWASAKI 250SS, KAWASAKI KH400, KAWASAKI KH250, KAWASAKI 350SS, KAWASAKI 400SS, KAWASAKI 250SS
OEM Discontinued
Buy ClutchBoltOEM discontinued.
I would like to thank the manufacturer for selling these bolts.
The tightening Torque is also specified and seems to be safe to use.
View detail
Fits: KAWASAKI 250SS, KAWASAKI 350SS, KAWASAKI 400SS, KAWASAKI 500SS, KAWASAKI 750SS, KAWASAKI KH250, KAWASAKI KH400, KAWASAKI 250SS, KAWASAKI 350SS, KAWASAKI 400SS, KAWASAKI 500SS, KAWASAKI 750SS, KAWASAKI KH250, KAWASAKI KH400, KAWASAKI 250SS, KAWASAKI 350SS, KAWASAKI 400SS, KAWASAKI 500SS, KAWASAKI 750SS, KAWASAKI KH250
Oil leak measures
I used it to prevent oil leakage from the oil pump.
The khSeries Oil pumpAluminumScrew pile tends to be crushed and under-tightened, causing the oil to leak.
This time I changed to this RubberWasher and Bolt.
No leaks so far on the test drive, but I'm going to take it for a long ride and see how it goes.
View detail
It got easier to ride
I chose this product to make my Z900RSCafe an Up solder. The length of the wire and the brake hose was not enough, so I prepared the OEM RS hose and installed it.
Since there is no hole, it opens with Drill.
I couldn't use the AxelLong wire for Cafe from Musashi-san because the wire is too long no matter how I try;
View detail
Even with Normal cable.
Drilling holes is required.
Normal cable and Wiring can be installed without Clamp, but it needs to be adjusted.
When you cut the Handlebar, you need to be especially careful to avoid interference and adjust it many times.
The Position is not too narrow than Musashi Kai Fat bar, so it is more suitable for touring than mountain pass Spec.
Since the Handlebar is narrower than the NORMAL, the OEMMirror jumps out of the Handlebar quite a bit, so replacing it with a Short mirror is Recommendation.
Don't forget to buy and exchange Bar End.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Inhalation Up
I bought it to get a little power up.
I've used M-Soul's Filter in other companies' species, so I chose it again this time because of its reliability and performance.
There is an error in the size of OEM and a little large, but it was able to be installed without processing etc.
I don't know how this one performs because I've been playing around with other things, but I think it's more or less effective.
View detail
Just right for an Alakan Rider?
By changing to Musashi Kai, the driving posture of the upper body upright state is possible though the length of the arm is short. It is very gentle to the waist for Arakan, and long-distance touring does not become painful. However, I feel that the Handlebar is a little tight for my body shape, but I am generally satisfied with the Large.
The wire relation can be used as it is with the OEM length, but the adjustment method is described in detail in the homepage of M-Soul as the replacement method of Handlebar.
View detail
Fits: YAMAHA SMAX, YAMAHA MAJESTYS
Weight Roller for LEVEL10
Quantity of Weight Roller:Pair (for Left and Right) Since there is no difference between
It's GOOD that you don't have to worry about the direction.
Just the weight (g) is listed on the Roller contact surface, so
It's a shame that it disappears after use.
View detail