Reviews
Fits: HONDA Super Cub 110, HONDA Super Cub 110, HONDA Super Cub 50, HONDA Super Cub 110, HONDA Super Cub 50
Once you put it on, you can't take it off.
Effect of Grip heater.
This is an electric heating wire wrapped around the Handlebar Grip to warm the hands. In temperatures below 10℃, even if you wear thick gloves, your hands will get cold after about 20 minutes of riding.
Cold hands not only hinder operation but also make you lose interest in riding a motorcycle, so these are essential items for winter. 。
There is also a Universal Product for Other Brand Products, but it is set as an Option for each car. Grip heater is recommended to use OEM Option because you can get the benefit of exclusive harnesses with appropriate length and ControllerExclusive Bracketetetc.Exclusive Design.
I bought HONDAOEM.
good point
○○ Even with thin gloves, it is not cold.
○ It is helpful to be able to divert OEM Wiring.
○Easy to drive for long periods of time.
Bad Points Notes.
Remove the bolt and screw that hold the handlebar in place. It is very hard, so there is a possibility that it may be scratched.
Battery consumption will increase.
The installation is Large odd, but...
Grip heater warms the palms of your hands gradually, keeping your hands cool. 。 They are also useful not only in winter, but also in early spring and late fall when touring in the mountains.
The benefits are.
The Grip Heater Set comes with an easy-to-understand, illustrated Installation Instruction Manual, which should be followed.
Once you put it on, you can't take it off.
View detail
I knew it was China.
It is regrettable that HondaOEM Western products in general are made in China. The protective film should be cut from the beginning and included in the package.
I would like to have it. If it fails, you will have to go out of your way to purchase a protective Film. Careful, that's not enough.
I would like to see more SeatBacks made by Japanese manufacturers.
View detail
Fits: HONDA CBR400 R, HONDA GOLD WING, HONDA VTR1000, HONDA NC750S, HONDA NC750X, HONDA NC700X, HONDA DN-01, HONDA NC700S, HONDA VT1300CX, HONDA SHADOW400, HONDA SHADOW600, HONDA CTX700, HONDA INTEGEA, HONDA FORZA, HONDA Silver wing400, HONDA VTX1800, HONDA VTX1300, HONDA GOLD WING F6B, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF
Best OEM parts
Best OEM parts View detail
soft-spoken
It is thicker and softer to hit. The time it takes to get butt pain has increased by about 1.5 times.
It is about as hard as the Tandem portion of a standard Seat when pressed with a finger.
It took slightly longer for my buttocks to start hurting.
Demerit is that the footing is a little worse and the handlebar is relatively lower.
However, the seating position is more flexible back and forth, which also makes it easier to avoid the CL footpeg in a sensitive location.
I wish there was Black other than Brown.
View detail
Fits: HONDA MONKEY125, HONDA DAX 125, HONDA Monkey 125, HONDA Monkey 125
I installed it just in case.
It is better than nothing. Installation was quite troublesome. View detail
Fits: HONDA Rebel250, HONDA Rebel500, HONDA Rebel300, HONDA Rebel300
Can be used for REBEL 250 and 500.
REBEL1100 is equipped from the beginning and can be used for REBEL250 and REBEL500.
The brake lever can be adjusted, but it looks slightly different from the clutch lever, which may bother finicky users.
View detail
defective
It is perfect as a Grip heater.
However, there is a terrible flaw in that the Switch cover falls off due to vibration while driving.
Moreover, there are no replacement parts and the entire body must be replaced.
View detail
parts shortage
Very nice product! The shortScrew is 11, but theQuantity:I was disappointed that only 1 pc was included in the package instead of 2 pcs. I installed it, but one part of the cowl is not stopped, so I'm worried about the buzzing sound in Situation with strong embrace. View detail
Cl500 brake
My car is a CL500, and the genuine brakes are a bit big. There is no problem in using it, but I wish the distance between the dress-up and the steering wheel was a little closer. After searching a lot, I found that the lever without tuning was more expensive than I thought and I didn't really like it, so I went with the genuine tuning product Yajaster. I decided, I liked it more after looking at it. I was especially worried about installing the dial, but I learned it by watching YouTube and it was simple. I can control the distance well and can dress up. I recommend it. It doesn't upload. My car is a CL500 ------------ ----------------------------------------------- My car is a a little bit of the CL500 genuine brake, but I don't want to use the distance between the dress up and the handle. I searched a lot. I decided that I decided more because I was worried about the dial, but I learned to see the YouTube. Powered by Google Translator View detail
Don't break the Styling
The work is as simple as removing and installing two Hexagon Socket Bolts and two 10mm Bolts.
I was worried about interference because I had installed MORIWAKI's HornGuard, but I managed to attach it without hitting the headlight.
Manual was a spec. that said to read the QR code and check it yourself, but I worked with experience and intuition that it would only stick the way it was supposed to stick. The paint job is well done and I think it is a good product.
View detail
Unobtrusive High Screen
Unlike the High Screen of other Manufacturers, it is a bit more modest. It has a windproof effect, so you won't feel the wind when it is completely down. View detail
Fits: HONDA Rebel300, HONDA Rebel500, HONDA Rebel250, HONDA Rebel1100, HONDA CL250, HONDA CL500
I have received it well
It's the right size and satisfactory quality... Delivery was fast and it was packaged well.I thought the left bag might be too big, but I'm glad that it's the right size, neither too big nor too small... I'm so satisfied that I'm thinking about purchasing an additional right bag as well. View detail
Fits: HONDA CBR1000RR-R, HONDA CBR1000RR-R FIREBLADE SP, HONDA CBR1000RR-R FIREBLADE
Blends in with Cowl and is less noticeable
It is small and when you knock it over, Cowl will get scratched. However, it is cool because it is streamlined. View detail
Fits: HONDA CRF250M, HONDA CRF250 RALLY, HONDA CBR250 R, HONDA CB250F
Oil change
Element replacement along with Oil replacement. View detail
Even with the bike spending most of it's life out in the sun the black colouring shows no signs of fading
About quality and texture, I can confirm that the quality is great and the material used is PVC (Polyvinyl Chloride) with a smooth gloss finish. About the feeling of use, This set of Honda decals just looks great on the fuel tank and even with the bike spending most of it's life out in the sun the black colouring shows no signs of fading. Products to buy together, If you are a fan of Honda bikes like myself then you could also add a some apparel from the Honda riding gear range to your cart so you look the part when you're out riding. Difficulty of installation, I can say the fitment of the decals for my installation was very easy due to the surface being flat and I used a wax and grease remover before the application of the decals to help the adhesive have the best chance of adhering to the paint. Cost performance and comparison with other products, The pricing of this product is great. Your receive two decals that are of a good size and great quality from a well known brand. The pricing of decals similar to these that are part number specific to a bike will be much higher. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff even added one of their stickers to the order which I'll be adding to my helmet. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
OEMOption
The entire product has a chic look with black painting compared to the silver OEM Product.
It is easy to miss the Bolt with Screw loosening inhibitor coated on the instructional bag.
The anti-loosening agent is applied quite thickly, so the initial screwing in is quite tight and makes me wonder if I screwed it in at an angle, but I don't seem to be worried about it coming loose.
The Bolt is at a point where I can barely access it with the Ratchet wrench with the Under Cover removed and Extension attached, so if I don't lift the Pedal, the Wrench will be applied at an angle and lick the corner of the Bolt.
Although there may be individual differences, the pedal on the down side is slightly more inward compared to the OEM, so I feel that it is more difficult to down on the heel.
Distortion and paint workmanship may not be a concern if you discount the fact that it is just moped parts, but this is one area where I wish Honda had done a little more work.
View detail
Maintenance essentials
Purchased to do my own maintenance.
It's a necessity
It's fun just to read about it.
View detail
Fits: HONDA Rebel250, HONDA Rebel500, HONDA Rebel300, HONDA Rebel300
Essential for big bike
Adjustable brake lever should make it mandatory for big bike since braking is much more sensitive. Unexpected webike is selling cheaper than getting it from honda usa. View detail
![[MONKEY รุ่นฉลองครบรอบ 50 ปี] มาร์คถังน้ำมันเชื้อเพลิงจุดกึ่งกลาง ประเภท 1](https://thimg-afcc.kxcdn.com/@wth-shop/assets/photos/review/16930775831693077583521.jpg)
เป็นสินค้าที่ค่อนข้างหาได้ยากและลิมิตเต็ด View detail
Product better than expected
Seat height is increased and cushioning is good. The price is reasonable and it would be great if there was a black Seat as well! View detail