Reviews
unexpectedly large
I like the design, it fits a lot, it's easy to wear, and there's nothing to complain about.
The photo shows it on a CT125 Rear Carrier. It is huge.
View detail
YOSHIMURA Fender Eliminator Kit
Item arrived..super fast shipping.3 days arrived.check and all item is in order.never been disappointing.highly recommend.thank you team webike.awsome job.5 ⭐ View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-8S
SDGS
Repair Parts has not been replaced in over a year and is not recommended. View detail
Cool!
I think it is the coolest of all Screen's products.
Easy to install.
Since the Cover area would be left open, I plugged it with thin plastic sheeting from Black.
The windproof effect is about as good as the bottom of the Helmet, so high speeds are now easier.
View detail
Pilot Jet
I don't know, I haven't completed setting yet.
The response was fast and helpful.
View detail
Fits: SUZUKI Gixxer SF250, SUZUKI V-Strom1000, SUZUKI GSX-S750, SUZUKI GSX-S150, SUZUKI GSX-R1100, SUZUKI GSR750, SUZUKI GSX-R150, SUZUKI GSX400 IMPULSE, YAMAHA XMAX250, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GIXXER250 SF, SUZUKI GIXXER SF250, SUZUKI V-Strom250, SUZUKI GSX250R, SUZUKI GSX250R, SUZUKI SV650X, SUZUKI SV650, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS
Yoshimura Quality
These oil filler caps are more usefull then you would initially think. The ability to torque them correctly helps prevent any venting or misting of oil from the filler on my track/race bike. They look really good with the usual Yoshimura quality. I miss the old works colour, but the grey still looks good. When installing these always use a barrier of some kind like tape, plastic or latex from an old workshop glove. This helps prevent damage on installation. Max torque is 8 - 10nm but more than that might cause some minor wear/damage, so ideally use a torque wrench. View detail
Fits: KAWASAKI Z125PRO
YOSHIMURA is the best!
I wanted the METALMagic type, but it was not in stock, so I bought the Stainless Steel Type.
The exhaust sound is not too Large and the bass is nice.
Punching holes in the Cover took a little time.
The Exhaust Band's protective tape has YOSHIMURA's logo on it, and I thought it was very detailed and elaborate.
I am satisfied with my purchase!
View detail
Fits: HONDA glom
You can experience the effect!
The details are carefully crafted.
The replacement process was relatively easy and quick.
The Torque feeling at startup will be a little thinner.
The Engine turns pleasantly after running and is solid and powerful.
However, although the sound quality is good, it might be better if the volume were a little louder in the smallest volume so that the driver would not have to worry about it when driving around town.
Also, there was a Gasket LINK on the page where I purchased the product, so I bought it together, but it was for Full Exhaust System.
I wish it had been mentioned on the product page that a joint gasket is required for the Slip-on Silencer.
View detail
Yoshimura Radiator Guard
As expected, Yoshimura and Suzuki are a perfect match.
I've wanted it for a long time, and I'm so glad I finally bought it.
The finish itself is very luxurious and sophisticated.
The price is quite expensive, but I think it is an item that makes the bike more stylish.
I recommend to anyone considering purchasing.
-------------------------------------------------- -------- As expected, Yoshimura and Suzuki are a perfect match. I've wanted it for a long time, and I'm so glad I finally bought it. The finish itself is very luxurious and sophisticated. The price is quite expensive, but I think it is an item that makes the bike more stylish. I recommend to anyone considering purchasing. Powered by Google Translator
View detail
Added photo of the bracket portion of the installation.
I didn't have a picture of the Bracket part of the installation when I posted last time, so I added a picture anyway. Just for reference. View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY S, HONDA CRF250L, HONDA CRF250L S
(Current status) Dress-up 90%, functionality 10%.
SP Tadao It is a combination with PowerBox Pipe
The combination is not recommended by the respective Manufacturer and
Installation is solely under personal responsibility.
Gasket between Exhaust pipe and Silencer pipe
SP Tadao PowerBox + Normal silencer is not required.
Normal pipe + YOSHIMURAExhaust System
When
Installation Instructions Manual for each product.
Tentatively assembled.
It doesn't seem to make much sense to put it on.
Gasket was not used to do the work.
Installation takes just over an hour.
It is better to temporarily assemble the silencer band & bracket first to make progress.
The sound is LARGER than NORMAL
The sound quality is not as caged as that of NORMAL, and it has a high, clear sound.
I can feel the change itself.
I feel a bit concerned about warming up my own Apartment on the bike parking lot!
As for functionality, I just did a short run around the neighborhood,
at present
I have not been able to experience the same power output increase etc. as when the PowerBox was installed.
■Personal Evaluation
Dress-up 90%,
Functionality 10% (*Contributes to weight reduction, although no output increase can be felt)
So I have to say that Cost performance is low.
If you have a problem with Gold, it might be the first Parts you release...
View detail
Fits: HONDA GROM, HONDA GROM
Nice heavy bass
The OEM sound was not bad, but I thought it was a little short.
Personally, it has a very nice bass sound (loud enough to be bothersome in residential areas at night), and the Response seems to have improved, and the Style has improved, making it even more fun to ride. I am very satisfied with this sound and style at a low price.
View detail
like a typical (e.g. of a woman)
I got my wish and installed it.
It is more solidly built than it looks and seems to be able to withstand Tie Down austerity.
This bracket is more suitable for the GSX-R than the Tandem Footpeg.
The Instruction Manual is also easy to understand, and I don't think the installation will be confusing.
View detail
Good
Glaringly and without insistence, it is Simple and luxurious, which suits my taste.
It would be nice if it was a little less expensive.
View detail
Small but...
It was smaller than expected, but considering the purpose, it is natural that it was small.
I bought it for another purpose but I am satisfied with YOSHIMURA Logo.
View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
I got a different impression than I expected.
I bought it because when I went to Hokkaido Touring, I found a lot of insects stuck in Radiator.
It's quite expensive and I've been slow to put it on since it's winter and the bugs are gone.
When I put it on, the Core was not as visible as I thought it would be, which is good because it gave a different impression.
Design is a matter of taste and I think I am just fine.
You have to run it in the summer to see if bugs get caught in it.
View detail
Fits: SUZUKI V-STROM250SX, SUZUKI GIXXER250, SUZUKI GIXXER SF250
YOSHIMURAExhaust System
SEA BASSvSTROM250sxYOSHIMURAExhaust System installation took about 30 minutes, it took longer to remove the OEM exhaust system. I ran about 100 km after the installation, the Torque is higher and I can use the higher GEAR more, the uphill is stronger than NORMAL. View detail
Fits: HONDA GROM, HONDA GROM
nice sound
I feel that the sound changes from about 6000 rpm, and it is a nice sound that keeps me turning.
However, after one week and about 200km, discoloration and rust started to float, so I recommend applying StainlessGuard if you are concerned about it.
View detail
Fits: KAWASAKI Z1100GP, YAMAHA YZF-R1M, YAMAHA YZF-R1, HONDA X11, HONDA VRX400 R100 ROADSTER, HONDA STEED600, HONDA STEED400, HONDA JADE, HONDA HORNET250, YAMAHA YZF-R1, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR400, YAMAHA VIRAGO400, YAMAHA VIRAGO250(XV250), YAMAHA V-MAX 1200, YAMAHA TRX850, YAMAHA YZF750SP, HONDA CBR250RR (MC22), HONDA CBR250R (MC17/19)
Sensor
I received a package today. The sensor is the one I would need. BUT!!! The little sensor was put in a box 15 times larger and stuffed with a bunch of air bags. As a result, I paid an additional 28 euros for Delivery, on top of the 15 I paid at the beginning. And the sensor is worth €18! -------------------------------------------------- -------- I received a package today. The sensor is the one I would need. AIM!!! The little sensor was put in a box 15 times larger and stuffed with a bunch of air bags. As a result, I paid an additional 28 euros for Delivery, on top of the 15 I paid at the beginning. And the sensor is worth €18! Powered by Google Translator View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-R1000R
It does not seem to be a Japanese Vehicle Inspection Correspondence!
I used to be a fan of AXIS Lapo, but this time I decided to buy YOSHIMURA for my GSXR1000R. I had a hard time deciding between YOSHIMURA and AXIS Lapo GPSilencer type, but now that I am over 50 years old, I decided to buy YOSHIMURA from Japanese Vehicle Inspection Correspondence. It sounds so good at high RPM that it is inspection certificate compliant ??. It seems that the baffle can be removed by small modification, but I will go with it as it is. I highly recommend this product and it has a 2 year warranty from the manufacturer. View detail