Reviews
It's broken
It broke after less than a year, and the shaking due to vibration was also large I found out when the piece snapped off
After four Spot welds, I thought it was natural for this to break off, and thanks to that, my phone flew off the whole stick I went
The stick situation is also too light and shakes very well
View detail
Nice mount
This Unit GPS/Smartphone Holder Mounting is very useful if your motorcycle do not have a regular handle bar. It can combines together with the mirror. View detail
I was firmer than I thought.
Although it is an assembly type, I think that it is unsuitable for use in disassembling and storing it once assembled.
I think that it was even better if you could adjust the width and height.
It is convenient if you have it, but the lateral direction is Large, so after all you need to think about the location.
View detail
Usability is bad
If you do not put the Tire in the Center, the Tire becomes obliquely formed when you turn the Tire and you can not turn it. It is troublesome to rotate while correcting each time. Call Maintenance Stand. View detail
I was glad to purchase it easy to use.
Cost performance is good. Usability is very good although it is cheap. Tire size up to 19 inches, but there are 20 in. There was no problem either.. I do not know yet the durability, but I think it is a good product. The difficulty is that Oil did not put Roller's Bearing on herself and challenged herself. View detail
Product with price
Looks etc.. Well done.. The feeling of use comes off as the direction of the front wheel turns, so correction is bothersome. Tire rotates lightly but the deviation becomes Large and it seems to come off. Front stand is useful. View detail
Depending on Ideas it seems likely to be divided everywhere
At first I fixed it at the root of the Clutch lever and used it to fix the ActionCam
I decided to install a camera in a different place, so a water temperature gauge ? Used as an additional Meter Bracket for voltmeter.
If there is a screw or Bolt that seems to be able to fix, it seems that it can be fixed anywhere with little processing from no processing.
View detail
Though it is usable
We were able to replace Spring of Mono Suspension of fzs 1000. However, reservoir Tank integral type suspension (Especially Tank's sideways sideways) However, with regular usage it was not possible to hook Spring, it was decided to use trial and error.
I think that it is very easy to use and good products if it can be fixed firmly to the upper part of the suspension.
Those who think that they would like to use from now on, I think that it is better to look at the pictures and judge purchase based on whether or not they can fix.
Regarding durability, there are things that are not genuine usage, but since Screw Mountain has been shattered considerably, it is a feeling that it is likely to become useless for the second time.
View detail
Nice Supporter
It is very convenient, and the bikes can be used as a support when it is used for outdoor travel. Easy to carry and not occupying storage space View detail
Can use
I bought it for Puncture repair in the mountain.
Weight is okay, but I think that it is within tolerance.
Although it can be used sensuously in exchange on the Rear side, I think that it is good after rehearsing on the Front side.
It is slightly unstable.
View detail
good
Tightened to Meter Mounting Bracket, it was not too short, it was just right size feeling for myself
In use for smartphone installation
Cospa best
View detail
You can use
Quality is not a problem at all. Both painting and processing accuracy are done well.
Height adjustment can also be done in 5 stages, 4 cm increments, so I think that it can correspond to various types of vehicles.
Because the base part of the base is in Ball joint shape, fine adjustment of the angle is possible, so stability is wonderful and good.
You can work safely.
I am also using it for my usual car wash, so I can float the front and rear Tire so the car wash will progress.
This is also supported when exchanging Tire, you can take it for your usual Touring (Because it is Tube tire) It is light weight Compact.
View detail
Unit Emergency Side Stand
From Chile; the shipment arrived in a week, if a week, by normal mail; The article is excellent, I only need the tape to secure the brake, to be able to lift the motorcycle From Chile; the shipment arrived in a week, if a week, by normal mail; the article is excellent, just missing the tape to secure the brake, to be able to lift the bike (translated by Google Translator) View detail
Wall hanging Helmet holder
As the number of Helmet has increased, I was looking for a product that can be hung on a wall to secure a storage location, I found this product.
A and B, 2Type, but I bought a Type B.
Installation is 3. I attached it to the board with 5? Diameter tree Screw.
It is shaped to hold the inner side of Helmet exactly.
It was a better product than I expected, so I'm planning to add it.
View detail
If you purchase unit's Rear stands, please come with us!
I do not know how it is now but when I purchased unit's Rear stands the L shaped hook was standard equipment.
This L-shaped Hook is a thing that is hard for me to use, perhaps Engine Displacement Volume of Motorcycle (weight) I think that it is hard to use in proportion to - - -
Motorcycle of Ritter Class will bow and become unstable.
So, if you are planning to use it in Large Motorcycle, I think that it is better to have this U-shaped Type absolutely.
In fact, the U-shaped Type was stuck firmly and felt stable.
As Demerit, it is necessary to create a Hook bolt in Swingarm and the U shape Hook is made by Gold Genre and it is BALIBALI, so the above mentioned Hook bolt becomes garish.
Well, it's not a big problem.
View detail
Very easy to use
I switched a few Ritter Sports, but the narrow space of the Sports type motorbike and the steplessly adjustable suspension of the general DoubleRing Nut are very difficult to work with the regular Hook wrench.
Besides the on-board tool, I bought some Short Type and adjustable items,
Still Swingarm and Hook wrench patterns interfered, I got scuffed off at a strange angle, gnawed Ring Nut, bad workability and hurt my hands and suspensions many times (Lol)
But if you use a guy ... no, exactly it will be very easy to work with this + combined with other tools!
The usual Hook wrench is a compact Short Type, but the handle becomes an obstacle, but on the contrary it does not get power and it will be hard..
But there is no handle for this Ratchet (I am Snap on's SwivelRatchet) In combination with (In some cases short extensions are added) Unnecessary interference disappears,
Furthermore, depending on the length of Ratchet, it becomes easier to put in force with the principle of Lever and the workability is very high.
By the way, Ratchet moves to a certain extent in the vertical direction without using Extension, causing interference (Swingarmetc. ) The thing of SwivelType is a Recommendation.
Personally I met a thing that seems to be a divine tool for a long time (Lol)
The price is also cheap and there is no more than this Compact It's recommended
I think that it is easy to use and very good thing.
View detail
Purchase for movie shooting
Replacing Motorcycle, Handlebar Mounting for movie shooting on Handlebar can not be installed without Space.
If I had thought of what to do, I found the goods of this one with the Mirror.
I purchased and installed it for the LeftMirror side.
The installation was also very easy, and it was possible to install it without problems in about 5 minutes.
It is likely to be useful from now.
View detail
I think that it is easy to use.
I attached it to Right Side Mirror of BMW's R1200 GS.
It is an installation to make it easier to watch the iPhone.
I think that it is good to be able to slide to a position that is easy to see because the tip part is getting down..
View detail
Purchase that there is no Navigation Bracket attached
Replacing Motorcycle Replacing Motorcycle with Accessory socket Now trying to attach NavigationBody to Handlebar my Handorbar of my Motorcycle is not a normal new circle and it does not attach in a slightly changed form, Do not fit together - Ho - I was worried about the rest, but I decided that the rest could be attached to Bracket using Mirror Body and purchased it with Mr. Web, I could complete the installation.
I installed it using LeftMirror side
1 - Remove LeftMirror and adjust Bracket - - - It was a bit small, but it was a little small but I did a good job without Large width remodeling
2 - Carefully tighten the Mirror Body so as not to damage the screw thread.
3 - I aligned with Mirror afterwards and tightened.
4 - That Navigation Bracket (Purchased and used by Webmen) Attach Body.
5 - Navigation Bracket Body has gaps slightly above and below but Large As durable it will stay as it is
6 - Temporary attachment of Navigation Body and installation completed with angle as well
It is easier but I will write it as an impression
There are a few points to worry about
My MirrorPitch (8. 10 mm) to see if it is better to purchase - - - Large I did not have a problem
View detail
I wonder if there is any loss.
I often go to the mountains, if I do Puncture in a place where mobile radio waves do not reach ... I bought it for something I managed.
Well, I think that there is no loss as it can be used during normal maintenance.
View detail