Reviews
choice goods
Thank you for the fast response.
Immediately replace the old one
I did
I look forward to working with you again when the opportunity arises.
View detail
To prevent Gasoline leakage in the event of a fall
We are planning to replace the Hose with a Hose with One-Way Valve along with the planned replacement of the Fuel Tank.
I ordered Red, but it is almost Orange lol.
View detail
Purchased for Restore for my old car.
The OEM parts were missing, so we used the alternative parts, but we are satisfied with the included clips. View detail
I utilized it on my old car!
The Hose Band was also included, which was a big help to us. View detail
First GSHose replacement in 7 years
The Fuel Hose of GB250 CLUBMAN has deteriorated and we decided to replace it.
We all know that regular replacement is a must, but we keep putting it off...!
I think this product is kind because it comes with a hose clip. I feel more satisfied with the elasticity of the new one than with the rigid and deteriorated one.
I know that deterioration of Rubber is inevitable, but since it is a double-layered structure, I expect it to be durable.
View detail
As per Spec. It looks thick and sturdy!
It was used for the modification to organize the tank to filter to carburetor. The outer diameter is as per the spec. and seems to be sturdy, but it is very difficult to handle. The attached fixed clip doesn't work at all. Even if it was made by another company, it wouldn't work. (Lol) View detail
Easy to use
The ZOOMER OEM fuel hose has a 4.5mm inner diameter, so I could not find the same system in Other Brand Products. I used this product and a conversion joint to install it. The product is inexpensive and easy to purchase, but it is difficult to know if the installation is good or bad without actually assembling such a product. View detail
I don't recommend passing fuel through it.
Instead of passing fuel through it, it is used as a Protective Tube to prevent damage to the surrounding area during wiring by passing twisted Stainless Steel Wire inside.
I often use this hose to hold small parts without letting fuel pass through, such as putting it under a battery to hold the terminal nut.
It is convenient to use together with Tie Wrap and Wire & may be self-satisfying for those who prefer this kind of Racer-like finish.
View detail
Easy to use
Used to bleed air from brake and clutch fluid.
It is resilient and can be adjusted to the desired length, so work can be done efficiently and conveniently.
View detail
Easy to use
Pliers make it easy to pick up and remove the fuel hose and other items very easily.
The Clip is also very strong, so there is no need to worry about leakage.
View detail
Easy to use
I use it to bleed air out of brake fluid and it is very convenient.
The length is 1 meter, so it can be cut to any length, making it easy to use.
I like that it is transparent so I can see what is inside.
View detail
Easy to use
It has moderate flexibility and is easy to use. I've used it on old Breeder, Fuel Hose, etc.
The translucent design made it easy to check the condition of the inside.
View detail
Is good
It stops Gasoline from dripping from the hose that has been removed from the Fuel tank.
Three types of plugs are conveniently available to match the Large size of the hose.
View detail
I used it for Replace in Fuel hose.
I used this product to replace the fuel hose on my off-road motorcycle. it is scissors and easy to cut, but the vinyl is thick and seems durable. View detail
Durable
Vinyl is thick and has excellent oil and heat resistance, so it can be used in a variety of ways.
I use it for the fuel line and I can see the gasoline flowing into the rear hose and feel like I am customizing it. [Color] I'm glad it was Clear.
View detail
Used to repair a fuel hose on an old car.
I used this product to repair a fuel hose on an old car. It was a steady job to replace it, but there were no leaks and the quality seems to be good! View detail
Fuel hose
NSR50's fuel hose had deteriorated and was replaced.
I measured the size of the old Hose before I bought it.
View detail
Solid for the price.
The KSR80 from Tank to Carburetor is exactly this delicate size. To be honest, it is so long that it does not need to be this long.
The included Clip is almost useless as it does not spread out.
View detail
Fits: KAWASAKI 500SS Mach III (H1), KAWASAKI 750SS Mach IV (H2), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z2 (750RS), KAWASAKI Z750, KAWASAKI Z900 (KZ900), KAWASAKI 500SS Mach III (H1), KAWASAKI 750SS Mach IV (H2), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z2 (750RS), KAWASAKI Z750, KAWASAKI Z900 (KZ900)
I think this Size is for Large body Drain type.
Used for Drain hose on TM-MJN24.
I think the Oil Resistant Hose sold at home centers is fine, but most of the ones sold at home centers are pink, and the long hose does not look good, so I bought it even though it is expensive.
I wish it were a little cheaper, but it's oil-resistant and long, so I'm satisfied.
View detail
Elasticity.
[How is it used?
TZr250R (3XV) I bought this to add a Filter to the Fuel line of
I couldn't bear to Cut the OEM Line, so I used this product.
Was the one you received as per Image?
When I touched the product I received, I was surprised by its elasticity.
The OEM Fuel line is quite hard, but I wonder if it was originally this elastic...
It looks like OEM at a glance, so it doesn't stand out as strange.
How was your experience with it?
I bought one with an inner diameter of 7mm.
The new rubber is very resilient and I was able to install the 8mm OD Filter without difficulty.
I bought this product because I didn't want to cut the OEM Hose, but I'm thinking of changing that to this product as well, since it's elastic and easy to put on and take off. LOL!
[Points to note]
The size notation is a bit confusing, but except for special sizes, if you choose one with a smaller inner diameter, you're basically in the right place.
Also, the Hose clip is not included, so you need to purchase it separately if you need it.
How did it compare to other products?
I also used a common Pink Hose elsewhere, but it became hard after less than a year.
I'm wondering how long this product will keep its elasticity.
【Review】
I don't know how long this elasticity will be maintained, but so far I am very happy with it.
The price for 1 meter is also good, as OEM Parts can cost around a thousand yen for a dozen or so centimeters.
View detail