Reviews
Fits: HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50
This time, XR motard was transplanted to disk-ization of an ape. This was used for fixation of a rear master cylinder at that time. It was in the instruction manual with the object for NS-1, and although it was device necessity, it has attached so
This time, XR motard was transplanted to disk-ization of an ape.
This was used for fixation of a rear master cylinder at that time.
It was in the instruction manual with the object for NS-1, and although it was device necessity, it has attached somehow at XR100 motard in the knowledge which is a DIY grade.
I have satisfied the function and the price, although appearance is not quite satisfactory.
View detail
Many components are needed for brembo RAJIPON attachment in addition to a master. This tank stay is also the same. although it seems that there is various tank stay -- the thing of the product made from this POSH also in appearance also in price -
Many components are needed for brembo RAJIPON attachment in addition to a master.
This tank stay is also the same.
although it seems that there is various tank stay -- the thing of the product made from this POSH also in appearance also in price -- exactly -- merit -- since that was right, it chose.
Since it is a stainless, it does not rust, and since it is buffing, appearance is carried out very much.
A lower bolt is set to STD although the bolt by the side of stay is attached about attachment.
I recommend-do preparing the stainless bolt of the same die length for unification of appearance.
View detail
Although it is used in combination with the radial master of a brembo, since it interfered in the cowl and a handle did not go out when it was an angle of stay as it is, it is bent and used. Then, it being very pleasing is being able to bend finely.
Although it is used in combination with the radial master of a brembo, since it interfered in the cowl and a handle did not go out when it was an angle of stay as it is, it is bent and used.
Then, it being very pleasing is being able to bend finely.
It was able to bend with nature to the extent that it did not give bending.
The degree of freedom of the neighborhood about there is important for products in general! Too!
View detail
It chose here for tank wearing of a brembo master cylinder. A price is considerably different although appearance hardly changes as the stay which has come out of the brembo. This one regards cost performance as good overwhelmingly. By bending
It chose here for tank wearing of a brembo master cylinder.
A price is considerably different although appearance hardly changes as the stay which has come out of the brembo.
This one regards cost performance as good overwhelmingly.
By bending stay, positioning of a tank can also be performed freely.
Rather than other manufacturers' stay, a smart can be equipped and appearance is also decided very much.
It is a recommend rightly!
View detail
It is used in combination with a product PRmade from brembo 19 RCS brake master cylinder, and an oil tank (hose mounting hole angle type of 45 degrees). An oil tank can be installed in an exquisite location. Although a close resemblance [ products
It is used in combination with a product PRmade from brembo 19 RCS brake master cylinder, and an oil tank (hose mounting hole angle type of 45 degrees).
An oil tank can be installed in an exquisite location.
Although a close resemblance [ products / bright logic ] is borne, since it does not change mostly but the price is sold by about 1/3, quality is profitable.
I think that it can be used in the beautiful state for a long period of time that it is hard to rust since it is buffing made from a stainless.
It is a point also with the place there is also no excessive ornament, simple and sufficient which is pursuing functionality.
View detail
Fits: HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50
Although there is Type D now ... It can attach easily with the bolt ON. a posterior matter -- it is admiration Bali Bali. Although the master of pedal [ of XR-M ], brake switch spring, and NS-1 was used, since a pedal location was not pleasing, a
Although there is Type D now ... It can attach easily with the bolt ON.
a posterior matter -- it is admiration Bali Bali.
Although the master of pedal [ of XR-M ], brake switch spring, and NS-1 was used, since a pedal location was not pleasing, a few was processed.
A brake switch is still pure.
The swing arm was made the product made from aluminum corresponding to a disk, and the wheel was made into XR-M.
Since the lightness of a wheel is a level which anyone can feel anyhow although a brake becomes a disk and it is not also more than it or the following, although expense starts, it is a recommend.
Probably those who can do processing well as for the stay itself may weld, and there is no extraordinarily uncanny thing.
In my case, the kick pedal will have been equivalent to stay, if it does not take out and fix outside.
Special attention is required.
View detail
It uses for the 06 zephyrs 750. It can boast of the beauty of - stay just for a moment. - Since the tank is small, the circumference of a master pump feels it refreshed. - price is high. - Since tank capacity i
It uses for the 06 zephyrs 750.
It can boast of the beauty of - stay just for a moment.
- Since the tank is small, the circumference of a master pump feels it refreshed.
- price is high.
- Since tank capacity is small, care at the time of maintenance.
- The rubber of the stay fixing part of a tank cracks immediately.
I think that people are parts good for aiming at KASUTAMU which is different for a while.
View detail
![[NISSIN Repair Parts For Master Cylinder] Reserver Tank Bracket](https://global.webike-cdn.net/photo/article/56/1219716156356L.jpg)
Fits: その他
It was used for attachment of a radar finder. A round terminal is a drawer jack for a headphones output. It is extra editing that such usage can also be done ...
It was used for attachment of a radar finder.
A round terminal is a drawer jack for a headphones output.
It is extra editing that such usage can also be done ...
View detail
They are texture and the design highest. Although a price stretches a little, there is no lost admiration. However, there is a place which must take care one. If it is going to attach a mirror, a spanner and the monkey hit and it may attach a
They are texture and the design highest.
Although a price stretches a little, there is no lost admiration.
However, there is a place which must take care one.
If it is going to attach a mirror, a spanner and the monkey hit and it may attach a crack like a photograph.
Occasionally, probably it will be cheap, and a cause is this although the crack ant may be sent by certain OKU.
Those who were purchased need to take care very and need to attach a mirror.
View detail
Since it was cheap as a set of tank stay, it purchased, but it is too rough touch. A tool and stay interfere in a design frequent also as means in the case of air-bleeding. If this point is improvable, I will think that it is better.
Since it was cheap as a set of tank stay, it purchased, but it is too rough touch.
A tool and stay interfere in a design frequent also as means in the case of air-bleeding.
If this point is improvable, I will think that it is better.
View detail
Although a design is good, the stay by the side of a clutch cannot perform air-bleeding in a master side, after fixing. (A ZZR1100D normal handle, tank level fixation) If it carries out by force, a crack will go into a master and stay. Moreover, w
Although a design is good, the stay by the side of a clutch cannot perform air-bleeding in a master side, after fixing.
(A ZZR1100D normal handle, tank level fixation) If it carries out by force, a crack will go into a master and stay.
Moreover, while the surface mesh is touching the attached hose, it will become white.
He exchanged for the brembo pure rubber tube and the hose clamp.
Although it was interference at the time of operation, also when a full stare was carried out, by our ZZR1100D normal handle, it did not interfere in a cowl.
If step is kept also with a brake clutch although it is cheap, he is smart and there is a hand of stay its original work, and isn't there such any selection, either?
View detail
quantity is a little -- it is -- although -- a parenthesis is very good. Texture is also the highest. He likes in tank stay. However, I purchased in order not to be a master of a nisshin and to use this for the master of a beringer this time.
quantity is a little -- it is -- although -- a parenthesis is very good.
Texture is also the highest.
He likes in tank stay.
However, I purchased in order not to be a master of a nisshin and to use this for the master of a beringer this time.
Since a beringer is the same as a nisshin, a bolt hole can be used for it.
Since tank stay like a board is said to be awkward as for the master of the beringer, this is a recommend.
View detail
It gives to the friend of a touring club. Brightness of aluminum is beautiful and it is preeminent for a feeling of possession! Since the location of a reserver tank is also right just, and it interferes in a screen or it is hard coming to see a meter
It gives to the friend of a touring club.
Brightness of aluminum is beautiful and it is preeminent for a feeling of possession! Since the location of a reserver tank is also right just, and it interferes in a screen or it is hard coming to see a meter, it does not become precocious.
Especially when having equipped with the lever made from an antlion, a color and texture can be unified, and it can be dressed up in good touch.
View detail