Reviews
I only used it once.
I locked Torque after using it only once and now I can't unlock it.
It's just overpriced garbage, don't buy it, don't buy it.
View detail
Great value - Must have for blind bearings
A must-have for double-blind bearings that you need to remove for engine overhaul.It worked great in the blind transmission bearing. It didn't work for some jammed swing bearings, but the collet kept its grip until the bearing seat began to twist. It's not the fault of the tool, it's a testament to how tight these races are.When your bearings need replacing, this bearing remover hits the bearing so evenly that it takes very little effort to use. I would use brass rods and hammer around the bed to get it out and sometimes that just wouldn't work. But that means you slide, compress, and quickly shift the weight up to push the mattress out. This is one of my most appreciated tools. And the protools price surpasses other competing products that appear to be of similar quality. I had no issues with this tool. It probably even works on my bike beds. View detail
Compact
Small, discreet and nice!
Installed on MotorcycleFront CB400T
For securing your Motorcycle during transport!
View detail
Versatile Holding Tool for your Maintenance Needs
About quality and texture: I am happy with the quality of the band holder from ProTools, made from a steel construction with a PVC coating over the band to help improve it's hold. About the feeling of use: I have used this tool to hold the clutch and flywheel on my Honda Grom when removal of these parts were required for maintenance with great success. The adjustable band makes this tool very versatile for varies sized motorcycle parts. Products to buy together: Some more tooling like a center lock nut wrench would also be desirable to purchase along side the band holder so when it comes time to remove the clutch assembly and oil spinner on your Honda Grom you have all the special tooling required to complete the job. Difficulty of installation: The process to install takes a few minutes, place the band holder around the part that needs to be held and adjust the band if required. Tighten down the T handle so that the band holder does not allow the part to spin as you undo the fastener securing the part. Not difficult to do. Cost performance and comparison with other products: Good costing as this is a quality made band holder from ProTools that has with stood numerous usage without failure as compared to the first band hold that I purchased from another site that failed soon after. About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: These band holder are limited to the sized parts they can hold. No smaller the 6cm in diameter and no larger then 12cm in diameter. View detail
Professional tool wire twister
It is a good Tool that is very easy to use.
The only drawback is that it requires a strong grip to lock the Wire in place. It would be great if it were easier to lock.
View detail
If you use the Rear stand alone, it's a must!
I use several of the same STAND, but Large is convenient.
Can also be used for 21-inch Wheels if forced.
The slender Tire falls over, so a rearward Jack-up or Lift-up is immediately necessary, but if you understand the precautions, it is a Large-change convenient Clamp.
The CHINA packaging arrived with the STAND exposed upon delivery.
Points will be deducted for numerous scratches and color peeling.
View detail
Necessary because it's consumable.
This will last you a long time. Good cost performance. View detail
This is handy.
This is what I was looking for, makes maintenance a breeze. View detail
Convenient
It helps immensely when washing the car.
I'm glad I bought it
View detail
Quantity:Set items are a bargain!
Quantity:It is a Set item, so it is a good value.
The nails can be replaced, so they can be used in a variety of ways.
I will end up buying a dedicated product, but for now, this is what I use for Rose.
View detail
Common Chain brush
[How is it used?
I use it to clean the Chain on my road motorcycle.
Was the one you received as per Image?
It is a common Chain brush as shown in the Image.
How was your experience with it?
I was a little worried about damaging the Seal.
For the 3-sided Brush portion, one side floated on 530Chain.
Brush width can be adjusted to match Chain size! so I will try to adjust it next time.
But not at the height of Brush. "width" So I wonder if it doesn't make much sense or not.
I haven't found much use for the long Brush at the end of the handle (laughs).
How did it compare to other products?
I used to use a 3-sided Chain brush from another Manufacturer, but there is no difference.
The only difference is the color.
View detail
It's easy.
This product is very useful for removing dirt from Drive chain.
It saves time because three surfaces can be polished at once.
Brush is not too hard and not too soft, which allows for smooth chain cleaning.
View detail
RWS! (RollingWorkSeat!)
This chair makes it easier to work in a middle or tight position during maintenance.
Size is 270mm×170mm for the seat surface, as mentioned in the product information. Body450mm×190mm
The body is made of strong plastic and has wheels, making it easy to move while seated and reducing the burden on the back when working.
If only I had a lower chair, it would be easier to work with. The RWS is perfect for Motorcycle maintenance, which is a task that requires a lot of work!
It is inexpensive, and considering that it gets dirty with oil, etc., I think GunGun is a good choice. The storage compartment on the seat can be used to store tools, oil and grease, so you can start working on a small task right away. It may reduce the amount of work that is postponed.
There were some shavings left in the opening of the chair when it was new, so I did not give it a perfect score for quality and texture, but it is not a chair for the type who cares about such things. I would recommend this product to those who value practical use.
View detail
Convenient
Convenient for cleaning the rear wheel and maintenance of the drive chain.
Chain can be cleaned very easily without Center Stand.
View detail
cheap
It's cheap
I think it is a good value for the price and the quantity.
The non-slip surface ensures that the grip is firm and secure to hold the luggage.
Size:Free, so anyone can use it and it is useful for weeding.
View detail
Easy to use
Brush is shaped for easy gripping and holding.
The handle is not Gold, so it is not cold and comfortable to the touch, so it is not a burden to work with.
Brush is a little hard, so it rubs well and is effective in removing stubborn stains.
View detail
Easy to use
Not bad
Spring can be conveniently installed and removed.
It is strong and will not break even if it is used for strong springs, so it can be used for exhaust springs and side stand springs.
It is safe to use
View detail
Triangle section is long and Motorcycle is not slanted.
Because the Triangle section is long, the Motorcycle is not slanted and will fall to the opposite side when the wind blows.
It is completely useless for both 18-inches and 19-inchesTire Racer.
I had to repurchase another product.
The Triangle seems to be about 1cm longer than the normal one that was repurchased.
View detail
Good brush
Nice and simple brush View detail
It can be used, but only in Large size.
Cost performance is sufficient. However, care should be taken when using it on heavy motorcycles. The clearance of the support part is large, so it will be slightly slanted. We own an NSR250R and an NSR50, and it can be used for both. Both vehicles are lightweight, so even if it is skewed by hand, it can be corrected. View detail