Reviews
It did not become usable
Transparency is also bad, Yellow is strange, there is distortion and the image becomes blurred and it is not usable. It seems as if you are suffering from White internal disorder and flight mosquito. I think that visibility is also bad and it is dangerous.
I would like to ask if the product planner of DAYTONA really used it actually.
I will offer you Gold for repayment.
View detail
There is no transparency
In a cloudy state [Color] There is no Clearness.
I thought whether Protect Seat is stuck, and even if I try to peel off it will not come off.
It is a good item for reading glasses Rider, so please improve the quality.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR
subtle
I bought Cushion to use for Pocket part of CB 1300SB. I thought that impression was pretty small, but it was okay. Actually putting it in the Pocket part does not enter Smooth because Sponge does not slide so much, there was a sense of discomfort for a while. Well this may be such a thing, but it was a bit disappointing. View detail
Accent to vehicle without discomfort
【What made you decide the purchase?】 Required
○ I thought this was good as I was wearing it on another person's W800.
【How was it actually used?】 Required
○ Accent is made at the center of the vehicle and Balance is good. (See pictures 1 and 2)
I thought that Large was tough with this way of fastening, but unexpectedly it was Firmly and Bibiri etc etc etc. There is no. There is no thing to get in the way while getting on a ride. The appearance texture is also modern.
As one of my original objectives, I hid the exposed Wiring near Injection and thought whether it would prevent Prank, but I could not hide it from my mind.
【Was it difficult to install? (Hard parts case)】 Any
○ No one feels it is probably difficult.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any
○ The lower end of Left SideCover is LINK outside InjectionUnit (The one who moves with Vienna when IgnitionON is selected) There is a possibility of interference Large. If you are close you need to bend Cover a bit. (See Photo 3)
Also, as Left Side only has directionality for installation, so be careful. It is written also in the manual.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?] Required
○ I do not have it..
【Hope for Manufacturer - Please let me know if there are any improvement points】 Required
○ I wish I could lower the price a little more. If at this price you can have a Plating version for W800.
【Have you compared items?】 Required
○ None
[Others] Any
○ Especially what is not something to improve, but the atmosphere surely changes. Let's purchase at the time of Sale. This Recommendation.
View detail
I did not attach
Color length was short, it could not be installed.
I buy other goods that can be attached, I lost it.
I think that if I add short color, I think that it will attach, but I think that strength will be lowered and I gave it up.
View detail
Expect anticipated sludge from the front Large
Until now I have used OEM Product, but it was a casual look like it was plastic and looks like it was awful and clogged with muddy when running Muddy and it seems like it looks awkward and its safety is not good so I introduced it.
I have not run Muddy yet so I do not know the sludge but I can expect it because the front is big open.
Texture also Anodized / I think both chamfers are good.
View detail
This is my favorite for WR.
I use it with WR 250 R. Regardless of the OEM, it is different from other companies' products, so it will stop two points so it's only a mud clogging different.
And Color - do not fall, it's the best.
OEM parts (Plate under OEMCover) Part of it is necessary, so cars who are fiddling from the beginning like me need attention.
In my case there is no OEM Plate so we added Color to that extent and responded (Lol)
I also have Bolt for filling in the unnecessary part at one point of three points closing, and I will do it recently ZETA
It may not be ZETA who is an old Anodized immediately (I'm sorry if it's too rude)
View detail
I am satisfied.
I think that OEM is more beautiful for the whole Line continuing from the Sprocket cover, but it is also light appearance in Slim and still looks Parenthesis. The mounting on the DrivenSprocket side is a long hole so you can adjust the height (Picture is the highest position)
Sprocket cover side installation Bolt, RubberDamper is OEM diversion, but it was able to substitute UniversalH Type RubberFor M6
In one point, fixed Nut of Sprocket and fixed Bolt of this product seemed to hit the interference Limit, so I caught a piece of Washer
View detail
Fits: YAMAHA NMAX125, YAMAHA NMAX125, YAMAHA NMAX150, YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX155
Exactly
Is Fit feeling perfect?
It is even better if it's a bit soft inside?
The price is a bit expensive, is it good for scratch prevention measures? (* ? ∇ ? *)
View detail
With Dress-up effect
The finish of Body is beautiful and easy to install.
However, even if the installation Screw is long and fixed
It is a pity that Body's texture is high, so that it goes out slightly from Body, ON / I am worried that the display position of OFF is Gap, but the overall finish is a passing point.
View detail
P.S.
Tire also changed
Since the weather is good, I've been on a test ride.
Gear changing ↑ ↓ No problem.
Because it is commercialized
That's not a problem, right? (^^;)
It is a matter of feeling w
Because there seems to be no individual parts
Posh!
Please supply individual parts.
View detail
Appearance 〇 Anxiety about function
NORMAL is Screw holding Relay's Body
I have kept it in RANCase directly
This product is a Screw clamping Relay's Body
For example, a clock is 9:00 p.m. Quantity : 2 pc only Reached RANCase 3 o'clock Screw to PistonBase
As you can hold, Lever holds Relay's Body
It moves a little. ?;)
I have not tried running
I wonder if Clutch will expire with this.
Al is enough for Gold
It might be better for K.C.
I do not have time to test - - - (>_<)
Impress after trial run.
View detail
Fits: YAMAHA NMAX125, YAMAHA NMAX125, YAMAHA NMAX150, YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX155
Satisfied.
Although it was about unconfirmed conformity with NMAX 155, it was possible to install without problems.
Because it is only fitted to Helmet in, anyone can easily install it.
I wanted insoles in Box so I am satisfied with Large.
View detail
A little expensive? ...... MachineMachine I feel more
Flat black matches around the engine, MachineMachine feeling is much better than resin Cover at all. ………Just a bit……
To some extent the time when the CHALYCHALY and Chain sounds are concerned
View detail
Two types of registration
If there is no triangle mark, it is installed because it may be misunderstood as 50 cc during the night driving.
Since Base and License Plate interfere with the vibration of Engine and make sounds, we base a thin Sponge on Base. Material : It is light like Aluminum..
View detail
Fits: HONDA XR250 MOTARD, HONDA XR250, HONDA XR250, HONDA XR250 BAJA
It is a good product
Titanium color is also Parenthesis nice,
It seems that drainage is also good, so I installed it,
I think the price is reasonable, looks good and maintainability is also good.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
It looks nice
I think that this product looks good as well as make and weight feeling is good. Installation is easy and OEM is 3 Screws, but this part is ScrewQuantity : It is 2 pc stop. I thought that it would have been better if the back was slightly lower if there was one dissatisfaction. View detail
More than expected quality (Material : FRP)
I bought it for FaceChange.
It became Production to order as if there was no stock, it took about a month to be shipped.
Material : Since I chose FRP, I thought that it was necessary to paint,
The quality was good as it was not necessary.
I purchased Under Cowl of the same Magical racing here, too,
Both are satisfied with the quality.
Functionality is not a product that can comment.
However, Large Kisano's Material for two palms : Since it is an FRP product, if it is a little cheaper
I think that it is better, but there is no other choice, so can not it be helped?
View detail
The texture has changed Large!
OEM 's Drive cover looks sticky and Material : It seems crappy for Plastic. Also, after running on the unpaved road, when the mud gathered inside the Drive cover, I had to remove Cover from time to time, but after swapping to the Zeta Drive cover, cleaning it even without removing Cover at the time of cleaning You can also do Titanium color, texture is good, appearance is neat, Parenthesis has improved. View detail
It is convenient for cleaning.
I see someone who is using NORMAL's DriveSprocket cover, but this Zeta's Drive carbar is very slim, it's easy to clean this as it's easy to clean with this installed.
View detail