Reviews
Not recommended? But...
I used this Base of Universal Type to attach the GIVI TREKKER OUTBACK to the CROSS CUB110.
Of course, there is no dedicated Base in CROSS CUB, so you can only use this UniversalBase.
While I'd like to preface this by saying that I don't recommend it because it's just not recommended...
As long as you have a well installed base, you can use WreckerOutBack without any problems.
View detail
Buy another Base as repair parts.
I installed it on a commuter motorcycle (YAMAHA Exciter 150) with a rear carrier.
As we bought a new vehicle, we are diverting our old GIVICase.
At that time, I replaced only the Base because I was worried about the fading and rusting of the Bracket & Screw.
It is a GIVIOEM Product and therefore feels perfectly fine to use.
Like my Case, though, there's a demand for a replacement.
For example, when you increase the number of cars, it is convenient to have a Base in each car while using the Case.
This is a great option for those who want to
The installation process differs from car to car, but since it has a certain degree of universalism, we are able to provide the best solution to the problem.
Fit to various types of vehicles.
Screw position, back and forth as much as possible:Pair (for Left and Right) It's good to take a Large-Span to
Because the Base is smaller than the box, there will inevitably be an 'o-bar handle' (popping out).
If you give priority to the screw position and narrow the Span, the stress on the Base and Carrier will be large, which will lead to vibration and damage to the Carrier while driving.
The Carrier (Aluminum Carrier) I used to use had a crack near the screw fixing area due to repeated vibration. It is recommended to pay attention to the above when installing the carrier because the burden can be reduced by taking out the Span widely.
Also, the Screw on the Cover that covers the Screw after fixing the Screw is a very thin Tapping screw. If you tighten it strongly, the resin will be defeated, and the so-called "Tapping screw" is very thin. "Stupid Screwdriver Hole so it's best to tighten it up gently here.
Mount Base with Carrier and attach a box.
It looks disagreeable & hellip; it can be tacky, but it's so practical that once you put it on, you can't take it off.
So this is both the Merit of the Rear box and the Demerit.
I think the GIVI Box will continue to be the deFault for commuter motorcycles in the future.
View detail
Installation feel is good.
I wanted to use the Rear box, so I bought the Base only.
This Base has a better installation feel than the other companies' bases.
I would buy it again if I wanted to increase my car as it's easy to install and helps me use the box.
View detail
It's fine
Installation is not difficult and very easy
The mounting part is also very universal and has a high degree of universalism
I think it can be installed on basically any bracket
The installation takes 5 to 15 minutes to complete
You'll need a small Phillips Screwdriver to install it, so you'll need to use a small Phillips Screwdriver to install it is a caution
View detail
It's fine
Installation is not difficult and very easy
The mounting part is also very universal and has a high degree of universalism
I think it can be installed on basically any bracket
The installation takes 5 to 15 minutes to complete
You'll need a small Phillips Screwdriver to install it, so you'll need to use a small Phillips Screwdriver to install it is a caution
View detail
Material:Plastic but not cheap
The MonokeyPannier case used on the ZX-11 is also used on the RMX250S I installed it on my RidingSpot's Carrier Installation is easy and I was able to install it firmly and firmly I think the degree of difficulty of installation depends on the shape of Carrier
Material is resin, but it does not look cheap Instead, it is lightweight and ideal for off-road vehicles
I have no complaints and the quality and performance was as expected
View detail
Bag is stable
The Touring 25's soft bottom plate makes the bike bendy when loaded on a motorcycle, which makes it stronger and for improved stability It is now more stable and easier to use during loading It also makes it easier to carry on my back It would be even better if the price was a little lower View detail
UniversalMonokey base
Even if you buy a Monokey case, Base is purchased separately, so the universalism is high Buy this one that looks like it
To fix it, you can use the Bottle at any 4 points of the netted area, so if you are creative, you can almost It seems to me that it can be installed on all Carriers
The size of Screw of Cover that covers the mesh did not fit at all I may be able to turn it by force, but there is a possibility that the screw thread will be crushed and cannot be removed So I haven't tried it (No problem without the Cover installed.)
It holds the Case firmly in place and gives you peace of mind without rattling while driving
View detail
It's probably made of Gold
As others have written, Steel is stronger and more reliable than plastic
It's heavy, but it's still made of Gold
I've been using the Mono Key type for a long time, so I can use it even if I buy a new motorcycle I am
As a result, it's cheap and long-lasting
View detail
To share Back with two Motorcycle.
Buy, buy to share with two !! Purchase Carrier and install, 30 minutes to play.
It can be fixed firmly, safe to travel.
View detail
Processing is a prerequisite product. There is no accessory parts, so it is necessary to purchase separately.
Top case of GIVI "Monkeysystem" Purchase to use multiple bikes. Product is only plastic base, it is necessary to separately purchase clamp attachment, mounting bolt etc. Since accessories etc. are not contained at all, attention is necessary. Since the only thing that fixes the product and the motorcycle is only two bolts, a rugged carrier is necessary for installation. Moreover, processing such as opening a bolt hole for attachment is necessary also for that carrier. I built and installed auxiliary carriers with bolt holes opened by welding. Processing is a prerequisite product (The one of the monolock system can be fixed with four bolts, so it seems that it can be installed without processing). Once installed, there is no rattling between the box and the base and it can be fixed firmly. In addition, a guide line for attaching an optional stop lamp is also molded on the back side of the base. However, although it is a plastic one, this price is too expensive. View detail
Required for GIVISide case! WaterproofInner dedicated bag
GIVI OBK37A / BSide case exclusive complete Waterproof Inner bag.
If you buy this Side case, it is good to buy this Inner bag at the same time.
I use it for a few nights touring, but when I arrive at the inn, I just open the lid of the Side case and just sweep out this Inner Bag, so it's better to check in compared to when I was using Soft's Seat bag very - It became dramatically easier.
OBK 37 will not be Completely Waterproof, so it is safe to have a book Bag.
Even though it is an Inner bag, there is nothing wrong with using GIVI as it is, as it is as Outer's Bag, Design is also excellent in texture.
View detail
It is cheap although it is solid.
I bought it to use GIVIBOX with two Motorcycle.
Although it was cheap, it was solid and I was very surprised.
Considering that the fine Screw is easy to lose, reserve is also included and thankfully enclosed!
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R SE KRT EDITION, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000, KAWASAKI Ninja 250, KAWASAKI Ninja 250SL, KAWASAKI Ninja 400, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja H2 SX, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10RR, KAWASAKI Ninja ZX-6R, KAWASAKI Z250, KAWASAKI Z250SL, KAWASAKI Z650
Cospa evil
At Ninja 250, it installed in Smart Bag of the company.
Although I thought why it is so expensive though it is just a ColorPanel, Plate of the same shape as this Panel has become a Screw stopping structure with the Bag fabric sandwiched from the Reverse side, a little consent.
Whether it is partly attributable to not posting this back Plate in any product image.
Both making and quality are satisfactory only with OEM, but this ColorPanel itself is not a particularly strong part, so I do not think that the above-mentioned back Plate is needed separately.
That much Reduction in cost (Half power level) Will it be? Kawasaki.
It is a story of Smart Bag Body, but Smaller than you imagine Smaller loading is limited by Wallet and Cigarette and lunch box.
And when it comes to the shape of the premise for mounting this Panel, it is slightly more expensive that the total amount of Bag + Panel is about 23000 against that loading amount.
Even this Web! Ke is Manufacturer fixed price selling.
Also, I hope you post all colors properly.
I did not understand well so I made Candy lime green, but it was Green Light with Lame.
Car body (Ninja250 KRT) It's different from Lime green in..
I should change it to BugStar..
View detail
Rose skirt for sewing
Porch, even at Tank Pouch P. A. Since I use SS system, I purchase it additionally.
The part to clasp the back : Sewing of Magic tape (Seam allowance) It is sloppy and can not be stopped by Beauty. (I do not measure individual Length as chitin)
I like cutting it and sewing it again, but it is the worst
From there, it can not be said that Magic does not start to peel off so you have to have it purchased in-kind or checked and shipped..
Because it is for Belt of the waist, so that it can be used for shoulder Belt of Rucksack, it is perfect if it can change the direction of 90-degrees.
View detail
There is a sense of affinity at this price.
It is a commodity that I bought to be able to share GIVI 's BOX used for PCX even with CRF, but it is excellent in COSPA and it is very good.
I am currently using B37, but I wanted B47 that is a little bigger. w
View detail
Hang to install
It is attached to OEM Carrier with DJEBEL 250 XC. Previously it was Back, but removing installation is troublesome and it looks like it is impossible but I am using Case.
Although it is Base, it may also be called Universal Type, and it can not be mounted Firmly unless it is tightened considerably with mounting Bracket and Bolt. When Firmly tightening the Base deforms, a gap is formed on the surface Cover and it is considerably clumsy.
Mounting Bracket as much as possible with Color and Washer overlapping so as to be horizontal to Base (Although purchased separately) When installed it can firmly attach without deforming the base of the resin.
Since the gold tool is Steel, 1 mm Rubber sheet is stuck on the part where it comes into contact with the carrier with anti-slip and scratch prevention.
View detail
Magic tape dimensions - -
Magic tape size is sewing as it is though it is too long.
For that reason, Belt has an extra foldable fee and it has poor adhesion..
* Similar products that had been before were able to swing 360 degrees, but this does not work, sorry ....
View detail
The objective is Waterproof.
It is purchased at the same time as OBK 37 BPACK 2. I have not run in the rain yet, but OBK 37 BPACK 2 seems to leak rain, so it seems that this is necessary after all. View detail
Compatibility with old type is also perfect.
This picture is the old product of E470. Gifted to Africa Twin, GIVICase (Top box) In order to relocate to CB 400, we attached Base kit to Carrier.
As a combination of Base's Bolt hole position and carrier's Frame, I was worried quite a bit to decide the mounting position where a solid strength comes out, but I managed to find a position of a good feeling.
The current E470 has many Bolt holes and it is designed to facilitate positioning.
For details on Carrier and GIVICase installation, please refer to blog.
http : / / gori-tech. blogspot. jp / 2015 / 05 / cb400givi. html
View detail