Reviews
When attaching the Set Back Plate of the ZX-6R footpeg
It came on just as I imagined.
The color was better than it looked in the picture.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA TZR250R, SUZUKI RGV250γ, SUZUKI RGV250γ, SUZUKI RGV-Γ250, SUZUKI GSX-R600, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI ZX-10R, HONDA RVF, HONDA NSR250R, HONDA CBR400RR, HONDA CBR250RR, HONDA CBR250R, HONDA CBR150R, HONDA CBR1000RR-R
Anyway, it's beautiful.
[How is it used?
I recently acquired a long-abandoned VTR1000SP2 from an acquaintance, and the handlebar was a Sansei RACING Endurance Spec. The handlebar had a Sansei RACING's endurance spec. type separate handle that can be removed in a snap. The angle of hanging is more than 10 degrees. The bar is far from the other side of the Fork. I tried to roam around the neighborhood once, but I couldn't ride it, so I bought this product.
I was looking for a cool type with a bar growing right next to the fork and a hanging angle of 10° or less, and found SUPER NOW's Racing Handlebar Type A to be EXACTLY what I was looking for.
Was the one you received as per Image?
I have purchased SUPER NOW products in the past. I know the quality is good and I received a beautiful Handlebar as per Image.
How was your experience with it?
Positioning has become much easier. Since I usually only work on off-road vehicles, I thought that replacing the handlebar on the separate handle would be a gamble since I did not know if it would interfere with the handlebar or not, but I am very happy that it was successfully installed.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
There is nothing.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Grips are standard RossiGrip.
HONDA OEM Grip Left Side (https://www.webike.net/sd/23201784/)
HONDA OEM Grip Right Side (https://www.webike.net/sd/23201783/)
View detail
Grip in both Type 4 and Type 3.
Purchased because Footpeg was smashed and broken in a fall.
Due to the delivery schedule, we decided to use this instead of Type 4, which we usually use, but the gripping feeling in the experiential Boots did not change much.
View detail
Refreshing appearance
I originally used Hook bolt, but bought CrabHook because I thought it looked more Refreshing.
I installed it immediately and it is working fine.
It looks Refreshing and I like it very much.
View detail
Fits: APRILIA RSV4, HONDA CBR600RR, KAWASAKI ZX-25R, SUZUKI GSX-R125, SUZUKI GSX-R150, HONDA CBR1000RR-R, KAWASAKI ZX-10R, KAWASAKI ZX-4R
This is more cosmetic.
The manufacturing is very good. It is not different from other manufacturer's high cutting ones.
As described in the description, drilling, routing, and other modifications are assumed to be Large Parts.
I personally think that processing premise = more flexible Parts, so I rather see it as Plus.
I am quite happy with the position as well, which I prefer.
View detail
Fits: APRILIA RSV4, GASGAS MC125, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR600RR, HONDA CT125, HONDA NSR250R, HONDA RVF, HONDA VFR400R, KAWASAKI ZX-10R, KAWASAKI ZX-25R, KAWASAKI ZX-6R, KAWASAKI ZX-6RR, KTM 250EXC-F, KTM 250SX-F, SUZUKI RGV-Γ250, SUZUKI RGV250γ, SUZUKI Wolf
Size fits!
Size is perfect and safe
Impactful while the color is a bit flashy.
? I recommend it.?
View detail
Excellent for COSPA
Used for Shift Switch installation on Terra Moto.
The Option Shift rod was too expensive, so I looked for an alternative and found it and purchased the desired 110mm.
It can be used without any problems at all, so if you are not concerned about Black, I would recommend it.
Material is probably Duralumin.
View detail
It's more solidly made than I imagined!
Aftermarket parts can also be purchased in component units, so you can squeak by with peace of mind.
A minimal manual for installation would be even better.
View detail
Fits: KAWASAKI , KAWASAKI ZX-10R, KAWASAKI ZX-25R, KAWASAKI ZX-6RR, KAWASAKI ZX-4R
SUPERNOW has been wonderful to deal with.
The hole diameter was not correct and when I contacted them, they immediately replied that they would send the correct product.
He also guessed that a long Bolt was needed for the adjustment and enclosed it as well.
I thought it would take a long time since the response was by email, but I was surprised at the fairly quick response.
I would like to ask for more in the future.
View detail
Fits: KAWASAKI , KAWASAKI ZX-10R, KAWASAKI ZX-25R, KAWASAKI ZX-6RR, KAWASAKI ZX-4R
The hole in the Lever GuardBody does not match the bolt size. The hole is too small.
The hole in the lever guard for mounting on the handlebar is smaller than the bolt diameter.
By the way, I tried to install it on a ZX-10R 2019, but the Lever Guard alone interferes with the Brake lever, so I need a 10-15mm collar on the Handlebar End→Bolt may also need to be re-arranged.
View detail
Fits: HONDA NSR250R, HONDA RVF, HONDA VFR400R, KAWASAKI ZX-10R, KAWASAKI ZX-25R, KAWASAKI ZX-6R, KAWASAKI ZX-6RR, KTM 250EXC-F, GASGAS MC125, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR250RR, HONDA CBR250RR, APRILIA RSV4, HONDA CBR600RR, HONDA CT125, SUZUKI RGV250γ, SUZUKI RGV-Γ250, KTM 250SX-F, SUZUKI Wolf
Good quality product . Fit perfectly however does not come with o-ring and require the re-use of the original gasket. View detail
Since the Handlebar was disconnected.
Due to cutting the Handlebar of the Racing Handlebar Kit (for installation of Lever Guard) It became necessary! There are a variety of processingParts to help. View detail
Reasonable and good
[How is it used?
Installed on MVAGUSTA's F4-BRUTALE1090RR.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
The Rear Sets were from Other Brand Product. I think it is KFACTORY.
I bought and tried several different lengths to adjust the height of the pedal.
The price is Reasonable and the color is Gun meta, so I think it will go with any footpeg without a hitch.
How was your experience with it?
It is a Universal Product, so some vehicles may require some installation work, but in my case, I was able to replace it and use it as-is.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
I hope there are other colors available, like Silver or Black.
View detail
Good cost performance.
[How is it used?
Installed on MVAGUSTA's F4-BRUTALE1090RR.
FOOTPEG is made by KFACTORY.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Bolt and nut fastening is easy.
How was your experience with it?
Edge is quite effective and excellent between grips.
Also, the reverse side of the bar is hollow, and screws are inserted through it to fasten it to the Footpeg Plate,
I like this shape because of the type of construction that makes it easy to remove the bolt if it is bent in the event of a fall.
The length of the bar is a bit privately short, so it is extended by inserting a collar.
[Included Parts:were they on?
It has Bolt and Nut.
The number of pieces is bar 1 pc with Bolt and Nut.
[Was there anything that disappointed you?
It would be nice to have a little more choice in length.
View detail
Cospa strongest
It is used for footpeg of Race vehicle YZF-R25.
The footpeg is used by Battle factory, but I chose SUPER NOW because it was in stock.
It has a RapidMotorcycle Shifter, but the Pedal adjustment white is Zero,
We changed to a slightly longer ROD so that the height can be adjusted.
Cheap but not bad quality, maybe cleaner than Battle factory's ROD?
Color is Color:The only drawback is that it only has Gray, but since it is a Racer, I don't mind as long as it fulfills the function.
View detail
I bought it for its appearance, but it is also well made.
I purchased this for customizing the look of my OEM Swing Arm after Polish processing! The picture of the product looked large, but when I installed it, it was a nice large size. Installation was easy and since I did not intend to use the CrabHook, I installed the original Hook for the Racing Stand with it. View detail
very good
Used on S1000RR Racer.
For Race, there is a great deal of flexibility in Positioning. The Rear Sets I have used up to now have 6 positions to choose from, but SUPER NOW has a total of 8 positions to choose from,
It is worth trying, and I think I will be able to find a position that fits well in the true sense of the word. As for Anodized, we will have to wait and see.
View detail
In the Handlebar of SUPERNow.
I think the color of SUPER NOW Lever Guard is good for SUPER NOW Racing Handlebar. View detail
Parenthesis OK
It is a replacement for the battered Battle factory.
Battle's footpeg is fixed at two points, Bolt and Footpeg, so it sometimes comes loose.
I thought the Nau surname might be harder to loosen since it is 3 points with Nut in it.
Since the bar and pedal are separate, not co-tightened, there is no possibility that over-tightening the bar will cause reluctance to move the pedal.
Grip feeling of the bar is also good and it seems to step well.
There are 4 positions to choose from, so you can have fun experimenting with different positions!
View detail
Purchased for Repair for moss.
Purchased as for Repair in the event of a fall.
The Footpeg originally attached to the Rear Sets broke off at the root Bolt during a fall.
Therefore, the durability of Footpeg itself seems high.
View detail