Reviews
no problem
There were no problems, and the product could be used normally. View detail
Just the right size for a Small Type car
I think the size is just right for replacing oil in Small Type cars. I think the price is also normal. View detail
Good
I use it for 250 Oil replacement.
It comes with gloves, so I think it is a very friendly product. However, I am not using it because I am using something else.
View detail
For Oil processing
[How is it used?
I purchased the Oilfor Replacement for the Grom along with Oil.
How was your experience with it?
Thankfully gloves and Band are included.
Oil was also dumped without leaking.
How did it compare to other products?
Unknown, as it has not been used for anything else.
[Points to note]
I would not recommend it in windy places, with a little regret,
View detail
historical legacy
Wow, so many people writing imprements on just Nozzle!
When I was on my 2nd, I kept a 1 liter can at the fueling port in the back of the car. Replenishment." The best time to do this was when I was
We didn't weigh the Levels exactly, and it was routine to dispose of the entire can after 3 or 4 refills (and it was free back then).
On the other hand, when pouring more than 3Liter in 4st Engine oil change, there is not much Merit.
It would be much faster to transfer the required amount to a jug or use Bellows long funnel...
But there is something quaint about attaching it to the mouth of the G1 one at a time and waiting for the last drop to fall out.
I think it is a gem that has supported Sunday Motorcycle.
View detail
I appreciate that it comes with gloves.
[How is it used?
I've used it twice.
Was the one you received as per Image?
As shown in the picture. Gloves are included.
How was your experience with it?
I used it without any complaints.
After use, just put it in the corrugated ball and throw it away as is, so if you do it right, you can change the Oil without getting your hands dirty.
The price is not too expensive and I would buy it again.
[Points to note]
Not particularly
How did it compare to other products?
Compared to Littering packs, etc., it is a tiered ball, so it takes up a little more space.
View detail
Nozzle
I think the product is good.
I changed the engine oil for the first time in about 10 years.
I was very enthusiastic, but the oil leaked out of the BWS125 because the place where the engine oil is put in is at an angle.
Next time I will use Funnel. But my hands get dirty too, so I may leave it to Shop.
View detail
Oil Treatment
The Large was just right and worked without any problems.
It is kind with gloves and Band.
View detail
1.I wish I had a 5L one.
In my oil replacement environment, 1.5L is just right, but 2L will still be enough, so I mix waste oil such as tempura oil and dispose of it.
In fact, I was thinking that a suitable waste oil box from the Homesensee would have been fine, but since it functioned fine, I decided to continue to purchase it along with Oil.
View detail
Easy to dispose of garbage
Purchased for my first Oil replacement.
I don't know about you, but I was impressed that I could smoke a lot of dirty Oil and throw it away like this.
The cospa is also the best!
View detail
Cospa good
There is no problem regarding disposal of waste oil for motorcycle use. View detail
Necessities when changing Oil
This is the first time I have used this product, and it is a convenient product that fits tightly into the mouth of Honda's UltraG1 and can be disposed of as is.
However, if the engine is a Vertical TypeEngine and refueling is done from above, the nozzle part is a little short, and there were times when the oil would spill unless the kick pedal was removed on my vehicle.
I would be more than happy to have a longer Nozzle as a separate Spec.
View detail
Cheap Oil nozzle
If oil is poured directly into a motorcycle, there is a risk of spilling it, so it is safe to add a nozzle.
I bought this product because it was recommended to me. There is nothing special about it, but I think it is a product that can be recommended to everyone because it is inexpensive and has no problems in use.
View detail
I think you can go Limit.
Since the 4-liter version was temporarily out of stock, I bought the 2-liter one for the first time so that delivery time would not be spread out.
I was worried because I usually spill oil even in the larger 4-liter treatment box, but I only made the usual mistake of spilling oil on the lid, which leaked out of the absorbent bag onto the floor.
As for the amount of waste oil, it was about 2 liters, so there was no problem.
Even the smallest one came with a tie wrap for soaking up waste oil and tying it up afterwards, as well as Vinyl gloves, so that was a big help.
View detail
Compact!
Used to replace Oil in crf250l!
This was sufficient!
The excess oil was also poured directly into this area to fit!
Vinyl gloves and an in-hemp palmook are also included for easy work and cleanup.
View detail
Buy in bulk for Oilfor Replacement
[How is it used?
Purchased for Oilfor replacement of PCX125.
How was your experience with it?
It is a normal, common OilPack! I'm glad I was able to use it without any problems.
How did it compare to other products?
I have used many different products and they all seem to be the same, especially the ones I have used!
[Points to note]
You should spread the bag tightly before replacing the Oil and be careful not to overflow.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Used in Oil Replacement
The product is as good as it looks.
Basically, OEM type Oils do not have Nozzles on the Bottle portion, so we use them in that case.
It is neither particularly good nor bad.
As others have said, it seems expensive to say it is expensive.
View detail
The height of the box ....
I purchased this for Oilfor Replacement
The height of the box is there, so make sure the Drain is in the right place.
I think Oil will spill if you don't decide.
Tie Wrap to hold the bag and Vinyl gloves are good.
I think I will continue to use it.
View detail
If only the box were a little thinner or narrower.
Used in Address50.
If you try to receive Oil, it will be pushed in between Center Stand and will be received at the edge of the box.
It is not impossible to receive it, so if you are careful, it will not overflow. If it is the amount of oil for a moped motorcycle, it has the capacity to be used twice, so if you think about it that way, it is very cost-effective!
View detail
Oil change essentials
This is a necessity for Oil replacement.
It is convenient to throw it away as is after use.
View detail