Reviews
Good tools for good maintenance
The included on-board tools are too inadequate for maintenance, so the minimum required is Quantity.:It's a Set.
I chose this one.
You'll have everything you need for basic maintenance, and you can always buy more if you need more.
The bag is designed to be carried by the rider, but it will not work unless you have enough room under the seat or can fit a helmet in it.
It is difficult to mount without Box or Seat bag.
View detail
Easy to use Size
I bought it because it is inexpensive and I thought it would be good as an in-car tool. I bought it because it is cheap. View detail
Made by SIGNET for peace of mind
KTC is out of my reach, so I decided to go with SIGNET, which is good quality and easy to use while still being within my reach. "Milli. It is a Hexagonal Wrench (not Inch) standard.
I previously purchased the Wrench set from Inch.
Because the Pole is long, it is easy to apply force and is very easy to use.
If you loosen it once and turn it by the ball point side, you can remove the bolt which is a little hard.
I thought I was almost OK with Inch, but when I did maintenance on my bike, it almost didn't fit.
It's pretty sad when the tool doesn't fit after you get into it.
View detail
Almost perfect
Excellent tools quality however the cam sprocket holding tool, the locating pins are too short so it cannot be used on the Monkey. View detail
Touring
Compact, unobtrusive and dependable. View detail
Stubby tool set43pcs
This is a Stubby tool set43pcs. In a little work, Inch is included, but Inch is not used so much, I want to increase themm a little more, well, the price is affordable and for a little work, I do not have to take out the tool box, it is enough to use. View detail
Te BearBear Yakon
Compact and safe in the TouringBack. View detail
Very Good.
I'm riding an old Harley and I always take this tool with me when I go on a bike tour. In case of emergency, this tool will be very useful. It's easy to carry and cheaper than the products from Harley. View detail
Review
seemingly the set is not bad, but the ratchet confused me there is a play in the ratchet mechanism, how long it will last I don’t know, there are no questions for the rest of the items in the set of questions, the box itself is quite rigid, but the mount will eventually break down in general for minor repairs ------- -------------------------------------------------- - with the mind set is not bad but that rattle me confused there is a play at the ratchet how long it will last I do not know the rest of the subjects set of questions is not the box itself is quite tough but the mount over time break down in general for the small repair will approach Powered by Google Translator View detail
Compact is good but surprisingly heavy
OffHow about one of the safe goods to put in the backpack when touring by car...?
However, because MONKEY Wrench is quite small, it is a small pattern so that it is impossible to pull out Shaft by Tire exchange.
View detail
Tools you need to have if you own a foreign car
This is an essential tool for maintenance of S1000RR. 100% of German cars (at least BMW) have Torque screw. Even the OEM oil drain bolts are Torque. Maybe it's a foreign standard or regulation, but most foreign cars have an Image that consists of Torque. Therefore, it will be able to be said that at least the rider who owns BMW is the tool which is not lost if it has it. I used to own another brand's Torque set, but when I owned it for about a year, it broke off from the root and became useless. As a result of various researches, I bought this tool of the brand GENIUSTool as a kind of nominated purchase because it was reputed to be sturdy.
The size is also more than the size of the Brand that I used before, so I already have a high impression of the usability.
View detail
Not available
It's almost impossible to use it properly.
Garbage
View detail
It must have been planned by someone who knows Motorcycle maintenance.
Tap & Dice is more often used to fix a weakened screw mountain than to cut a new screw.
As a Sunday mechanic, I'm sure we've all had the experience of having a hard time getting the bolt in when servicing a motorcycle.
In such a case, if you spray CRC or something like that and tighten the screw hole forcibly, the screw hole will be damaged more and more, and in the worst case, when you remove the screw hole, it will be damaged and the bolt will be broken.
In such a case, it is good to repair the Screw.
Put some cutting oil (anything is fine. If you put cutting oil (any kind of oil, even Grease) on it and put it through the Tap (Dice), you can get a good result.
Screw will be able to enter without Stress. It is a pleasant feeling.
So you should keep one Tap dice set in your tool box for Tap (modification of Female Screw on Nut side) and Dice (modification of Male Screw on Bolt side).
There's one more thing you need to know!
This Yamashiro-made Quantity:Set has a nice SizeLineup.
Please compare the Size content with many other products in Home center and Amazon etc.
Quantity that contains M10×P1.25:There will be almost no Set. (Pitch1.5 is the mainstream for M10)
The fact that they include a fine grain is the deciding factor. The ones I use most often are M5~M8, but Motorcycle has M10-P1.25 too, like Engine Mount.
It may not be suitable for hard applications such as cutting screws in a new iron block, but it is highly recommended for restoration.
View detail
Highly recommended for your first full set tool.
I've been on Motorcycle for a long time, but this is the first time I've purchased a tool that looks like a tool.
With 133pc, you can do not only basic motorcycle maintenance but also minor home repairs and DIY. [Contents] It is
The surface treatment of the entire tool is also solid, and for the first time, a solid toolbox &Quantity:It's too much for me to buy a Set, and I'm a bit enchanted with it. As for the regrettable part, I felt that it would be good if the resin part of Driver and Pliers was softer so that it could be gripped more easily.
The Flex Ratchet Wrench also has enough Pieces and I had no problem with detailed work.
It also comes with a variety of Torque Bit sockets, so even if you own a KTM model, you don't need to buy them separately.
I've only done Brake Pads and Oil changes, but I'm sure I'll use it for other maintenance.
View detail
Especially to foreign car owner…
It is convenient if you have the vehicle which uses Inch size a lot, especially foreign car Owner. It can be used for a long time. View detail
Recommendation to BMWOwneretc.
The product is generally as expected and feels good to use, I think it is good to have if you have a vehicle that uses Torque, BMWOwneretc. View detail
Buy for Husk
It has a long handle and a short handle which makes it very easy to use, very handy for hanging Torque and removing Screw quickly.
Also, I've recently started riding a Husqvarna, and it's full of Torque screws, so it's become a must-have tool.
If you drive a foreign car, you should have it.
View detail
Mirror finish and Plating is beautiful.
It is used for the socket for MINIRatchet, but the size that is necessary for the maintenance of Motorcycle is Quantity:It is available in a set so you can work efficiently. The socket is very compact, so it is convenient for working in a small space. The appearance is also beautiful because of the mirror surface treatment. View detail
[Contents] is substantial.
It is a Penetrating Driver, so it is very effective to use it with the Hammer. [Contents] You can use it efficiently in various situations. View detail
This is a safe portable tool.
I would recommend this as a carry-on tool for the rider. View detail