Reviews
Fits: Others (Φ22.2)
PetitCustom
For PetitCustom around Handlebar View detail
![[NISSIN Repair Parts for Master Cylinder] Assembly Clutch Lever](https://img.webike-cdn.net/catalogue/daypic140709/27355_1_l_TS.jpg)
Fits: Others
I just wanted to Black.
Purchased to go from OEM color to Black.
Since Other Brand Product is expensive, OEM Equivalent Product is sufficient.
View detail
Should have got this sooner!
Great price for the product. Installed on my Crf250r. Quality lever and feels great. With a ton of adjustability, you?ll be able to get it dialed just to your liking.Easy to install. The rubber boot keeps water out and it looks awesome View detail
Fits: YAMAHA XJR400R, YAMAHA XJR400, YAMAHA FZS600 Feather, YAMAHA FZ400, YAMAHA YZF-R1, YAMAHA XJR400R, YAMAHA ZEAL, YAMAHA Diversion 400, YAMAHA Divsion 900, YAMAHA TDM580 D (3VD|4TX|4EP|5CG1-2) 92-01, YAMAHA TDM580 D (3VD|4TX|4EP|5CG1-2) 92-01
You can buy OEM Equivalent Product at a low price.
[How is it used?
YAMAHA XJR400R (07 year) Used for
When I bought the motorcycle, it came with an external brake/clutch lever, but I didn't like it, so I bought this product.
Was the one you received as per Image?
The design is very good, as shown in the Image, very close to OEM. OEM products are surprisingly expensive, and many used ones are in poor condition, but it's nice to get an OEM look at this price.
You may want to have it as a for Repair in case of a broken Lever.
Was the installation difficult?
If you can do some maintenance, it's easy:just remove the bolt and clutch wires.
How was your experience with it?
It is very comfortable to use. The original Other Brand Product that came with it was also short lever, but this length is easier to grip.
[Was there anything that disappointed you?
I was concerned about the slight cheapness of the product.
View detail
OEM same etc.
[How is it used?
YAMAHA XJR400R (07 year) Used for
When I bought the motorcycle, it came with an external brake/clutch lever, but I didn't like it, so I bought this product.
Was the one you received as per Image?
The design is very good, as shown in the Image, very close to OEM. OEM products are surprisingly expensive, and many used ones are in poor condition, but it's nice to get an OEM look at this price.
You may want to have it as a for Repair in case of a broken Lever.
Was the installation difficult?
If you can do some maintenance, it's easy:just remove the bolt and clutch wires.
How was your experience with it?
It is very comfortable to use. The original Other Brand Product that came with it was also short lever, but this length is easier to grip.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
nothing special
View detail
Works geat absolutely loved it
Replaced a broken perch with this and it has worked flawlessly and was less expensive than a lot of other brands.Somehow managed to break the stock one but this replacement fit perfect and was just what I needed for a good price. View detail
Fits: SUZUKI GSX-R1000, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA XJ6N, YAMAHA YZF-R1S, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R6, SUZUKI GSX-R600, YAMAHA FZ-07, YAMAHA MT-07, YAMAHA FZ-09, YAMAHA MT-09, YAMAHA MT-09SP, SUZUKI GSX-R750, SUZUKI GSX-R1000R
It's a classic
In fact, we had used the same one for the 2006 model of GSX-R1000 for the 2022 model of GSX-R1000R (as a result, it was common), but we did not like the rattling of the shaft due to age-related deterioration after 16 years of use, so we re-purchased it this time.
In the current Catalogue, the Titaniumium color was discontinued, so I had no choice but to purchase Black.
Although there were repair parts for the lever, there were no repair parts for the shaft, so we decided to purchase the entire unit.
I was not able to Repair Parts, so I have a low rating for Costa.
View detail
Liver Arm
The clutch side had a GALE SPEED lever, so we replaced it as is. The screw was a little difficult to insert, so I used a file to cut off the protruding part and installed it without any difficulty. I like it in my own way. View detail
Fits: HONDA CRF250R, HONDA CRF250R, HONDA CRF250X, HONDA CRF450R, HONDA CRF450R, HONDA CRF450RX, HONDA CRF450X, HONDA CR125, HONDA CR250, HONDA CR125, HONDA CR250
DRCClutch lever
It is a Motocrosser part, but I think it is close to OEM and has excellent cost performance. The durability will be seen from now on. View detail
Fits: HONDA CB1300SF SP, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SB SP
Reliable ACTIVE?
The great thing about this clutch lever is the wide range of fine adjustment of the grip and the lever shape. If you adjust it properly, you will surely find a point that fits.
Installation is exactly the same as removing and returning an OEM lever. It's a product for each car model.
You can feel the quality of the construction even in Winding and Long touring, where there are many shift changes. The high quality of the cut-out parts also gives a sense of presence as a custom look and feel.
I recommend it!
View detail
Fits: KAWASAKI Ninja250SL, KAWASAKI NINJA250, KAWASAKI NINJA250, KAWASAKI NINJA400
It doesn't stick as it is.
The product itself is good, but it does not stick as it is. The Sleeve is too thick, so I had to shave off the Holder. Please check the manufacturer carefully. View detail
Half
This is a purchase to change to a shorter length.
Looks nice, but the price.
I had a hard time removing the Screw, but after installation it looks good.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z750S, KAWASAKI Z750, KAWASAKI Z650, KAWASAKI Z1000R EDITION, KAWASAKI Z1000, KAWASAKI VERSYS650, KAWASAKI VERSYS650, KAWASAKI VERSYS650, KAWASAKI VERSYS1000, KAWASAKI NINJA650R, KAWASAKI NINJA650R, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI NINJA400R, KAWASAKI NINJA400, KAWASAKI NINJA1000, KAWASAKI ER-6N F, KAWASAKI ER-6N F
The handlebar area is tightened.
I have been using ZEAT Levers in successive generations of Motorcycle, and I am very satisfied with the high quality of the product.
However, replacing the clutch lever on the 25R was a bit troublesome because the nut is difficult to turn and there is a switch that can easily be damaged.
If you are not sure about the replacement, ask the Shop.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZX-14R HiGrade, KAWASAKI 1400GTR, KAWASAKI 1400GTR CONCOURS 14, Others
No complaints about texture and shape
The quality of ZEAT's Lever is so good that it has been installed on successive generations of Motorcycles.
A little pricey, but very satisfying.
Of course, but Brake & Clutch is a Quantity:It is replaced by Set.
View detail
Fits: KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KLX250, KAWASAKI KLX150S, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, KAWASAKI KLR650, KAWASAKI D-TRACKER X
Test Ogawara
Test Ogawara View detail
Fits: SUZUKI DRZ400 S, SUZUKI DRZ400 SM, SUZUKI DR250R, SUZUKI DJEBEL250XC
Although there is liking by people, texture and a feel are also quite good to be able to change the angle of a lever, without changing the play which I compare pure and regard as much good. It is regrettable not to be fastened unless a thin spanner ha
Although there is liking by people, texture and a feel are also quite good to be able to change the angle of a lever, without changing the play which I compare pure and regard as much good.
It is regrettable not to be fastened unless a thin spanner has a lock nut of the bolt which determines the angle of a lever depending on the angle of a lever.
They will be five stars if there is no it.
View detail
Fits: SUZUKI 250SB, KAWASAKI KLX250, KAWASAKI SUPER SHERPA, KAWASAKI D-TRACKER
Since the adjust function was attached, it exchanged. It can adjust to oneself liking and becomes easy to operate it, and an appearance parenthesis is good and admiration may come out custom.
Since the adjust function was attached, it exchanged.
It can adjust to oneself liking and becomes easy to operate it, and an appearance parenthesis is good and admiration may come out custom.
View detail
Fits: SUZUKI DRZ400 S, SUZUKI DRZ400 SM, SUZUKI DR250R, SUZUKI DJEBEL250XC
Since it was likely to become obstructive on the occasion of hand guard attachment when it was a normal lever, it purchases. Appearance good is carried out by beautiful processing, and it is 縲? Fine regulation of grip width is also possible. S
Since it was likely to become obstructive on the occasion of hand guard attachment when it was a normal lever, it purchases.
Appearance good is carried out by beautiful processing, and it is 縲?
Fine regulation of grip width is also possible.
Safe also at the time of a fall, since a crease preventing function occurs.
When there was a function in which the power which grasps a clutch is assisted, in addition, it was good.
View detail
Fits: HONDA CB1000 SUPER FOUR (Big One), HONDA CB1000 SUPER FOUR (Big One), HONDA CB1300 Super Four, HONDA CBR1100XX SUPERBLACKBIRD, HONDA VTR1000FVTR1000F FIRESTORM, HONDA VTR1000SP, HONDA VFR750, HONDA RVF750, HONDA X4
It exchanges simultaneously with a brake lever. In play [ itself ] is the same as a brake lever. However, since it is a little shorter than a pure lever, it is hard to do clutch operation for a while with three fingers. Appearance is that whic
It exchanges simultaneously with a brake lever.
In play [ itself ] is the same as a brake lever.
However, since it is a little shorter than a pure lever, it is hard to do clutch operation for a while with three fingers.
Appearance is that which is said and is a three stars for the plus minus 0.
View detail
The texture of a motorcycle carries out UP. operation in particular is also satisfactory -- it is .
The texture of a motorcycle carries out UP.
operation in particular is also satisfactory -- it is .
View detail