Reviews
Air cleaner kit
It looks good. From the driver of the car that stopped next to me. "I like it. When
I can even talk to them. I think it is a little bit expensive to
View detail
I felt the Engine braking reduction!
I bought it because the engine braking was too dominant and difficult to ride in NORMAL.
As per other reviews, Engine braking reduction is certainly a change.
Smooth embracing and easy to handle.
I didn't expect it to be very effective, but it is worth the purchase.
View detail
Appearance Refreshing in Slim
I bought this product because it is Slim compared to other products.
The rear area has been refreshing a lot.
The installation itself is easy, but removing the OEMFender is pretty Large strange.
You need to push the Wiring into the body side, but I recommend you to remove the Helmet in to work on it because Harness is stopped by Bracket inside.
You can change the angle of Number. Please do so at your own risk.
If I were to write a few disappointments, they are as follows.
1.Color of Body
I personally would have been happy if it was Black instead of Silver because the body side is Black.
2.Reflector is not included.
The OEM Reflector is used, but the thickness of the Reflector impairs the overall sense of balance.
3.Waterproof processing of License Plate Light Wiring
I felt that the Wiring bare and Waterproof treatment was lacking.
I rolled Vinyl Tape because my Heat Shrink Tube didn't fit through it.
View detail
Quality products, includes wiring, plug and play, no cutting
This has all needed parts . Plug and play wiring. Looks good, all stainless steel. I put this on a 2022 USA spec grom, JC92. Angle of plate is adjustable, Notching required to mount plate in usa. View detail
Great exauhst
I have this exhaust on my my bike venom 125 x21RS little Ducati This fits right under the engine it's loud but not to loud it has a different sound great product well made View detail
Fits: HONDA Grom (MSX125)
Design is the best!
I like the design of this bike, the center two-piece looks like a high class motorcycle. Everyone who has seen it says it's a good parenthesis.
In terms of driving, it seems to be TorqueDown instead of extending the high rpm a little, but it is within the expectation.
The sound was a little too large for my liking. (Lol) Personally, I feel it is too noisy even if I wear two Baffles, but it is good for those who like the sound of Large fineness. If you like large sound, this is good.
If you are familiar with the installation, the exhaust system replacement itself takes 10 minutes and the Fender Eliminator Kit installation takes 30 minutes.
It takes a little hang to adjust the mounting angle of the rear blinker.
View detail
It might be good for STREET type.
I bought it to try it out because it was cheap.
It's slim and parenthesis is good, the price is good for Stainless Steel.
It's quite a buzzing sound.
I wonder if it would look good on a Chopper or a youngster.
good point
■Material:Stainless but cheap.
It looks great on the Chopper Custom.
The bank angle can be taken there.
Not many people are wearing it.
The high rpm turns quite well.
A bad point
It's a blast to say the least, so be careful Idling.
Carburetor setting is quite off.
It's cheap but well made with Stainless Steel.
I think it's an interesting White Exhaust System.
View detail
Fits: YAMAHA SR400, YAMAHA SR500
Ha Gap was it …
I bought the thing to try it out.
I think this price is cheap for Stainless Steel Exhaust System.
The sound is also highly rated.
But …Crack appeared in Exhaust SystemBody after about 6 months (lol).
good point
It is cheap for Stainless Steel Exhaust System.
Contributes to weight reduction of the vehicle body.
A bad point
I think the strength is low. Crack will appear in 6 months …
I thought Design was not good.
I think it's controversial because there are people who don't fit in, but I didn't fit in ….
However, this manufacturer has released Exhaust System for various car models, and it's made of Stainless Steel, so it's worth choosing!
View detail
Fits: HONDA TODAY, HONDA DIO(4Cycle), HONDA TODAY, HONDA DIO(4Cycle)
It's quieter than I thought.
I installed Bore up and High Camshaft and assembled.
When I ran the engine, the exhaust system was quieter than I expected.
Compared to the Normal muffler, the sound is more Large.
It's not a deafening sound, so I'm going to give it a full throttle when I'm done breaking it in.
Of course, I'm going to register it as a two-class moped.
View detail
The installation is a little Large strange.
The price is cheap, but the installation is large and strange. I would recommend this product to anyone who is new to customizing. View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125, HONDA MSX125
JC92 is difficult to install
I installed it on my JC92, but the position of the hose coming out of the engine seems to have been changed and it is quite difficult to do.
I didn't cut the Hose and snaked it to install it, considering Maintenance.
It is true that the engine braking has become milder, and the clunking at low speeds has become less frequent.
View detail
Rediscovering the advantages of OEM
The footing has improved somewhat, but even so, if it bottoms out on bumps… I went back to OEM after all.
It seems to increase the height (length) of the Fork Spring with the attached color, but maybe 60?Down is No Color and 40?Down is… with the color.
View detail
Air cleaner for jc92
[How is it used?
I've been waiting for about 4 months to receive my order, and I think the power is better than normal.
Was the one you received as per Image?
I thought it was cheaper than Image. Especially the Cover.
Was the installation difficult?
I didn't think I'd use it with Normal parts turned off, I can't turn it back to NORMAL, I have Hose turned off.
How was your experience with it?
I think I'm feeling powered up.
[Included Parts:were they on?
It came with an extension Hose and one Bolt.
[Was there anything that disappointed you?
Since there is no detailed Instruction Manual, the adjustment of the air volume is delicate.
Other items that would be helpful
Request I would like to see an Instruction Manual with detailed information.
View detail
Worst Exhaust System Ever
I ordered to replace the exhaust system when the car was delivered, but I was surprised when it arrived. The paint on the silencer end cap was not hardened properly and was sticky to the touch. The exhaust system that I do not want to install in a new car with a conspicuous color baldness arrived.
Webig accepted the return, which was helpful but quite disappointing.
There is such a Manufacturer, so I think I'll do a thorough investigation and purchase next time.
View detail
Fits: SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman
Good for Driver and good to buy
As per Title, the person driving will be at ease during Tandem.
That said, he said that it would reduce the anxiety of the person doing the Tandem considerably, and that there were at least three places to grab it.
This makes it easier to keep the weight in the middle and not worry about the Corner slipping down.
By doing so, the stability is increased and driving is much easier with it.
I'm impressed.
I'm sure you'll have to remove the rusty Nut when you install it.
I tried spraying it with anti rust Spray etc.
I used a solid wrench set that cost about 3000 yen.
I am a beginner, but it was not difficult to install.
I recommend it.
View detail
I bought this for my SUPER CUB 50, but I can't use it.
I bought this for my CUB50 to fit as per the title, but when I tried to install it, the brake pedal interfered with it and it was unusable!
You may be able to use it if you want to process it, but if you don't have the skills, I can't recommend it.
View detail
Cospa good
Engine feeling changed to Large. However, it has already installed NGKPlug, non-resistance Plug cap, and SP Takegawa's HYPERIgnition.
It sticks to the climbs that were Downshift from 5th gear. (Same speed) Also, since Axeloff's emblem is Mild, the next acceleration felt easier with Accelerator operation.
I think it's responding Smoothly because it can hold the embrasure.
But it is hard to put it on by yourself because it is behind the Cell.
If you have a rad pen with a bent tip, you can use BoltON without TubeCut. I use this Pattern.
View detail
Please make a Cancellation.
I don't know, I haven't received it yet. View detail
If you remove the headlight, you can use STAND safely, but it takes up a lot of space when you store it.
Purchased for front side maintenance.
It has a simple structure, but it will stand firmly.
I think the Rear Stand is essential when using it.
Insert it firmly into the StemBracket.
You may be able to use it without removing the Headlight, but I'm afraid to, so I always use it without it.
Grip is not glued in place, so you'll have to glue it yourself.
It's hard to find a good place to store it when not in use. The Arm is in the way when it is assembled.
It's a pain in the ass to disassemble every single thing... while similar STANDs from other companies are unobtrusive!
View detail
Measures against secondary air contamination
I fixed the problem with the mounting bracket with my own modification, but the problem of secondary air contamination remains.
As you can see in the attached photo, I used 38φSiliconHose(180°Elbow) to make etc. diameter pipe, and implemented secondary air mixing measures.
I'm happy to get the original performance of the Power Filter, but if I have to go to this much trouble, it's much easier and more economical to use other parts.
View detail