Reviews
Definitely useful Goods, couldn't get them all in 100's of dollars!
I thought about whether something similar could be done with 100s of dollars, but in the end it is a dedicated product. It did not come true.
However, at first I didn't quite understand how to use it, and the pictures convinced me SIDE. I was not sure how to use it at first, but after seeing the picture, I was SIDE convinced. Please note, everyone, that at first I did not know how to use the Hook. Wrong." They were hanging....
I was quite lazy and my hands were slow, so Caliper was often in a state of limbo.
It is inevitably necessary to hang it up for maintenance, especially for Caliper rubbing and around the Stem.
As it is, it looks bad for the Hose, especially the opposing 4-pods, which are heavy.
We have purchased this car due to the increase in the number of cars.
Although the cost...may be a factor, we are sure that you will be more satisfied than if you had made it yourself using products from 100-yen stores.
It's well thought out.
Also, even when Caliper is not being touched during maintenance, tools can be hung temporarily, nut storage, etc. Vinyl bag." It can be used as a substitute.
It's convenient
View detail
difficult (e.g. customer, guest, child)
I bought this because it is so easy to use.
But after the first replacement, Wire was torn off.
I don't know if I put too much effort into it or if it's a trick...
I reported it to webike and they were able to replace it.
I will try again at my next Tire replacement!
So I'll give it a rating of 3 for now.
View detail
Rubber grip on Wiring!
As expected from a specialized product, it is quite strong even though it is thin. If it were a common product, it would likely break when twisted, but there was no such concern with this product. View detail
I like that it folds up! It's a little expensive, but it'll last for years, so I'm very happy with it.
I used to lay down a bath Matte when I was servicing my Motorcycle in the yard, but it was too tacky.
I was looking for a good looking compact motorcycle maintenance chair and I found this product.
Purchased at WeBig… Result Large Satisfied!
I like that it can be folded. I also take it for hiking because it is lightweight and compact.
It's a cool design and it's a Commendation!
View detail
Sturdy and Large but can be hung on the wall for storage!
Oil drain pan is a must to change vanvanoil in the yard!
Overall, it's well made, and if you accidentally drop it on the ground, it'll still be there.
Not a scratch on it! It's been hanging on my garden wall for years, rain, wind and UV resistant, with no problems!
It is very convenient that it has a handle and can be hung on the wall… The spout is also well made.
It is easy to collect waste Oil. I recommend it.
View detail
DAYTONA Oil drain pan
This is the 3.5 liter capacity version.
Used to replace oil in GSX1000 KATANA.
Oil used to be received by oil treatment agent in a corrugated ball box under the drain bolt, but Vinyl interferes with the Exhaust System, so an Oil drain pan was installed.
Including the replacement of the oil filter, the GSX1000 KATANA was able to receive the waste oil exactly as it was supposed to.
View detail
Size feeling, good effect
I used CRC over it instead of Engine oil. It soaks in quickly, so use it after pouring more oil. It is effective in removing Gasket marks, etc., and the size was just right. View detail
Easy to use with no deflection
When receiving, shifting, and lifting the Oil, there is no deflection and no problem in use.
However, cleaning the container after transferring the waste oil has become a hassle, so the number of times it has been used in recent years has decreased considerably.
View detail
For Sidecar
I use it for parking on hills and I am a little worried about parking brake alone so I use a stopper on the rear wheel just in case. it fits inside the glove box so when I stop the Sidecar, I just take it out and put it on the rear wheel.
If you have a Motorcycle with GEAR, you can put GEAR in it, but I would recommend it to Scooter owners.
View detail
Good feeling
I'm glad I was able to reuse the OEMSeat, even though it's pointless to use the wasted hole, but since I'm removing the OEMRubber from the Seat, it would have been nice to be able to attach the Rubber to the wasted hole anyway. View detail
Convenient to have. Universal.
I saw the president of the Motorcycle shop using it for a little while and bought one myself.
It is useful for those who work on the ground, kneeling on the ground, or for storing small tools or removed parts.
The material is quite firm, so you can kneel or sit on it without any problem. I think it is useful to have one of these in your car not only at home in the garage, but also when you ride your motorcycle on a transporter such as Circuit or OffRoad course.
View detail
I was able to adjust it properly.
I have used it a total of three times on my medium and large motorcycles and have been able to adjust the oil level well each time without feeling any deterioration. (Purchased 1 year ago)
After use, I clean it lightly with Parts cleaner before storing it, and it has been used without any problems.
Cost-effectiveness is also Large, so a dedicated Tool is useful! (^^)
View detail
This is for the ZX-6R! (LOL)
Great for the ZX-6R!
Other cars have an oil filter right above the oil pan, which only serves to prevent oil from dripping into the exhaust pipe, but the ZX-6R has a filter in a strange place on the gearbox, and if not cured, it would be covered in oil. This product prevents Sauce.
It is as if it is for the ZX-6R.
After use, just a quick wipe with Parts Cleaner is all that is needed.
I can't let go of it.
View detail
Good for cleaning bikes
There's a lot to clean up in the garage. I don't have much experience with silicone accessories and am aware of the benefits and drawbacks and pretty much knew what I was doing when it came to ordering them. Pros: 1) I keep the water at 70 degrees and I can keep my hands in it. These gloves are much thicker than the latex kitchen gloves you can buy at the grocery store, and hot water is not a problem. 2) Tired of smelly sponges when washing parts with a sponge. With these gloves, you don't have to worry, they rinse and dry almost instantly. 3) No way the soft silicone cleaners on fingers and palms will scratch anything delicate. 4) It's really easy to clean and rinse the sink after washing the parts with these gloves. 5) Although easier to put on than latex or plastic gloves, I made it even easier by occasionally dusting the inside with unscented talc. 6)Long lasting and really durable View detail
That would be handy
Bracket used to stop Wiring, 1Quantity:Set contains 8 pieces.
I often use it for in-house Wiring of cars and I also use it for Motorcycle as you can see in the picture.
Thin Wiring is fine, but thick Wiring is not very suitable.
The clasp is made of soft gold, but this means that it is easy to open, and if you hold Wiring from below, it will eventually loosen.
If the Bracket is placed in a direction that does not require any force to open it, there should be no problem.
The adhesion of the double-sided tape is neither good nor bad.
If you apply it with a good surface preparation, it will hold up reasonably well.
It is a useful tool that is easy to use.
View detail
as if one were an innocent person
[How is it used?
Used to surface the clutch cover
Was the one you received as per Image?
Yes
How was your experience with it?
Nice Size and easy to use.
It can be easily crushed, so if you prefer a smaller size, you can use
Crush with a slotted screwdriveretc.
[Points to note]
Hit straight and parallel.
Be careful not to cut too much
View detail
![[PIT GEAR] Wheel Brush PG-270](https://img.webike-cdn.net/catalogue/images/7837/pg-270_01_TS.jpg)
It's Brush that falls down a lot!
I bought this product to wash for Vehicle for cars and Motorcycle Wheels. It is very useful and large enough to remove dirt from every corner of the vehicle. I bought a good product. I am satisfied with it. View detail
I'd use it if I had it.
The items are useful if they exist, but they are useful.
When kneeling, you do not have to put your feet directly on the ground, and when sitting on the ground, it feels reasonably comfortable to fold it up and sit on it.
It is not a revolutionarily convenient Level, but I don't think you will feel lost if you buy it anyway.
View detail
A must for Valve clearance
I purchased this for Valve clearance adjustment.
The part requiring Thickness Gauge is essential because it is not possible to measure it with other measuring tools such as Caliperetc.
Kowa Seiki is a company that I had not heard much about, but it is a very long-established tool manufacturer established in 1952, and it seems to be a company that manufactures not hand tools that we ordinary users use, but special tools and equipment that motorcycle and automobile factories install as equipment. It seems to be a company that manufactures not hand tools for us ordinary users, but special tools and equipment that are installed as equipment in motorcycle and automobile factories.
Unlike Dial gauge and Micro meter, Thickness Gauge does not deviate so much.
However, if rusting occurs, the thickness can easily change with rust, so only that point should be noted.
Since it is not a tool that is used so routinely, it is better to store it in Vinyl after use with a rust inhibitor, or if not available, a lubricant smeared all over it.
It has been about 10 years since I purchased it and it still remains rust-free.
View detail
Keep one and use it all the time.
I bought this for servicing the Cylinder area of my DT50.
It's for Gasket stripping.
Scraper can remove some of the surface, but it is better to use oil stone at the end for a firm surface to avoid unnecessary troublemakers.
Water-cooled engines, in particular, have a water jacket, so it is best to do this properly.
One unit can be used in various places such as Cylinder head, Cylinder, Exhaust manifold, Carburetor Joint, etc.
It is not something that decreases so much, so it is good to be able to use it for a long time as long as you don't drop it or something.
I bought 220 because I wasn't concerned about grain size at the time I bought it, but I think 400 would be fine for surface preparation.
View detail