Reviews
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
Non-dimmable
It is inferior to even OEMPhotoBlackMick, which is two years old and has a weaker dimming. In the first place, the Shield cuts the UV light, so there is no way the Pin lock inside would react to it. I should have realized this before I bought it.
[Color] Smoke and Color:I would like to try Yellow but only dimming is not recommendation.
View detail
Polarization effect subtle
It's polarized, but it doesn't eliminate the reflection of the Glass in the car.
Blue sky doesn't get darker or anything.
The reflected light was just rainbow-colored and the vision was psychedelic.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
dimmer
It did not change at all, probably due to the UV Cut in OEMShield.
Melo when exposed to sunlight during breaks. [Color] It was about Smoke, but once Shield was lowered, it was almost [Color] Return to Clear.
I don't think you should expect too much.
View detail
SHOEI X-14 with dimmer Pin Lock Seat
Mistuba Sankowa Pin Lock Seat dimmer.
Installation itself is easy, although it requires a lot of effort.
The view through the Pin Lock Seat appears a bit distorted compared to OEM, which is uncomfortable until you get used to it.
The OEMShield from SHOEI does not allow UV light to pass through, so it does not dim at all.
When I checked the external Shield, I found that the Base is all OEMShield with Mirror processing, so the dimming Pin Lock Seat for CWR-F is completely useless.
View detail
Dimmable? Almost. [Color] It won't be Smoke!
I purchased a dimmer Pin lock, but it only changes to a very light color even under the hot pecan sun.
Amazon's Universal dimming Pin lock is 3 times better.
I was delighted with the exclusive Pin lock, but I am disappointed.
I will see if I can return it now.
Everyone be warned, it is about half the density of Mellow Smoke.
View detail
Fits: Others J-FORCE IV, Others J-CruiseII, Others J-Cruise
I shouldn't have expected too much.
I was attracted to the dimming function of CJ-2 for Shield by J-Force?
I was somewhat prepared for the delivery time as they were out of stock, but ・・・・・
The actual delivery time took two months and ten days due to every delivery postponement.
I had high expectations based on the product description, but I feel like I've been completely shattered.
First of all, the thickness of the product itself is too thin.
Compared to the OEM Product is the impression of a much thinner Pe LePera.
When I adjust the pin lock, the pin lock is wrinkled.
Still, the tension was put on and made to adhere closely...but it is an uneasy area.
And the dimming function, which I was expecting the most, is disappointing to say the least.
I exposed it to sunlight for 10 minutes on a sunny day, but it was only slightly purplish.
It is thinner than OEM Light smoke.
I am sure I was expecting too much, and I am disappointed with the touted message.
Moreover, the field of view is distorted, probably due to the thinness of the tip. I guess it does not bother me while driving.
It is intended for nighttime use and for wintertime use when days are short.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
About the same brightness as Mellow Smoke.
Even under the hot sun, it only turns to Mellow Smoke. I should have bought PhotoBlackMickShield even though it is 4 times the price. View detail
Buy Repeat.
Previously, the Ally Light Smoke + Pro Grip Clear I had installed it with Lapide SR's Standard Equipment's Clear Shield with Progrip Bronze Mira combination. As for my impression. Ally Light Smoke + compared to the Progrip Clear I feel that visible light is reduced well because of the mirror shield. Even when looking directly into the sunlight, this combination is less glaring than the previous one. I think it is a good combination. I bought this shield to use the one I have left over this time, but I also considered using the mirror shield of Other Brand Product. I also considered mirror shield of Other Brand Product. However, the shield itself is easy to peel off, so I decided to use the outside of the shield as shown in this article. Mirror processing on the inside of the shield I think this combination of shields is more durable. The price of the Other Brand Product processed shield is about 8,000 yen, and the OEM Shield + Progrip Mirror Shield Pro Grip Mirror Shield I think this combination is more economical. View detail
Fits: Others YF-9 ZENITH SportsStripe, Others YF-9 ZENITH Pinstripe
easy to read
The Visor should be spread out until it is completely flat. View detail
Just a clear base. [Color] Not Clear.
It is only a clear base, but it contains a thin layer of pink, so it is a little dangerous to drive at night.
The dimming function is also not Large.
The ultraviolet rays change to Blue, so my face did not get hot from the sun, but the glare was the same.
I bought it because it had a dimmer function and Ideas was good, but I think the price is more expensive than other Pin Lock Seats, and I don't think I will buy it next time.
View detail
It's rather solid. Slightly transparent when bright?
Screen can be changed in less than 5 minutes. It's a little transparent when it's bright, but I'm generally satisfied. View detail
![FOGWIN [Fogwin] General-purpose Standard F02](https://global.webike-cdn.net/photo/impression/73/7350055541c1f443f53d095d95586a67L.jpg)
Pin lock.
I use AGV K5 S.
Shield was just getting WoundWound.
Due to unavoidable circumstances (laughs)
I scratched the shield on Asphalt surface and replaced the shield.
I didn't get the pin lock because I didn't know when it would be delivered, so I installed the one I've been using for a while, but hmmm, the pin is in the wrong position and I can't reach it (lol)
So I decided to go for the fog-in, which was recommended by Seiho.
There's an adhesive side to stick it to.
With pin lock, it gets more and more subtle (laughs).
I feel like this is better. Mm-hmm. (laughs)
I just put it on and will try it again and report back on how it works.
View detail
![FOGWIN [Fogwin] General-purpose Standard F02](https://global.webike-cdn.net/photo/impression/04/04e85d9805d8a89be42e393ba23f7bd8L.jpg)
very good
I've installed it on my OGKCUBtShoeoma.
It was a Review like Pin Lock Seat itself is not good or Pin Lock pin is broken.
I am also satisfied with the fact that the anti-fogging effect is preeminent and can be reapplied if it fails.
View detail
![[Raleri]PhotoBlackMick Anti-Fog Insert](https://img.webike-cdn.net/catalogue/images/73021/Photochromicstandard_2400x_TS.jpg)
Not the same etc. as PhotoBlackMick
Mounted on the Shield of AGV X3000, the light is not enough through the Shield, or it is not as Black as I expected. (Greenish) It did not change and was completely useless for my application. The thickness also makes it difficult to open and close the Shield.
I had high expectations, but if you want the same Level as ……SHOEI's PhotoBlackMickShield, I don't recommend it!
View detail
Refreshing。
I went to a dealer and asked them for advice and they gave me a pretty good price, so I went online and bought it. About half price. I'm sure there was some age-related deterioration, but my vision is also Refreshing.LargeI'm satisfied. View detail
Winter Essentials
I bought this product separately because I bought YJ-21 ZENITH to replace Helmet.
I can't ride without Pin lock because it is very large effect to prevent fogging of Shield in winter.
It was GT-Air before I bought it, but I used Pin lock as well, and the fogging of the part where there was no Pin lock at the edge of the field of vision was very bad.
YJ-21 ZENITH became large in the Pin lock part, and the fogging of the edge of the field of vision became a concern slightly.
I can't see and my vision is even better now.
View detail
Manufacturer's Products for Peace of Mind
Used on a new Shield with a spare Helmet
important item
[Was there anything that disappointed you? No
Do you have any wishes or improvements you would like to make for the Manufacturer? None
[Do you have any products to compare it to? None
Frequently Asked Items
What made you decide to buy? Be a ManufacturerOEM Product
How was your experience with it? Satisfied
Was the installation difficult? No
View detail
Gold, par for the course, the worst!
The announcement that the Shield on the Jet helmet is curved and cannot be attached.
If you're short, give me back my Gold!
View detail
![[Raleri]PhotoBlackMick Anti-Fog Insert](https://global.webike-cdn.net/photo/impression/3c/3c8e3472554751ec21460649af3ad06eL.jpg)
That's a shame.
After using it twice a month, it has reached the end of its life, and it no longer changes color to blue. This was disappointing to the premise that ARAI's Helmet was new and was disappointed. The rest, only functions as an anti-fogging tool. Whether it is a problem of the date of manufacture, if it lasts one year, it is five stars, but one month is too bad. View detail
Manufacturer's Products for Peace of Mind
important item
[Was there anything that disappointed you? (after the -te form of a verb) not ..
Do you have any wishes or improvements you would like to make for the Manufacturer? (after the -te form of a verb) not ..
[Do you have any products to compare it to? (after the -te form of a verb) not ..
Frequently Asked Items
What made you decide to buy? Manufacturer's Products
How was your experience with it? Relief
Was the installation difficult? No
[Was the Instruction Manual easy to understand? Yes
View detail